Today Garmin announced the new Fenix 5 Plus series, which takes the existing Fenix 5/5S/5X and injects full onboard color mapping, onboard music, and contactless payments. Additionally there’s new Galileo GPS support for higher accuracy, new smart notification privacy features, and locking the GPS altitude to the elevation data in the maps themselves, among other features.
Meanwhile, the higher end Fenix 5X Plus also gets new Pulse Oximetry hardware/software solution that’s even likely to be approved as a medical device. Atop all that are a pile of new software features, most heavily focused on the hiking realm, but also applicable to other sports as well.
I’ve been using three final production loaner units for more than two months now across a wide variety of landscapes and sports. I travelled specifically to the peaks of the French Alps to test this watch and the also recent entrant Suunto 9 on fairly demanding trails. Add to that the usual complement of swim/bike/run, and I’ve got a gaggle of test data to work with. As usual though, once I’m done with these loaner units for this review I’ll be sending them back to Garmin, then going out and getting my own elsewhere.
With that – let’s dive into things.
What’s new:
While this product is technically named the Fenix 5 Plus, in reality there’s enough new stuff here that Garmin could easily have called it a Fenix 6. I’m not entirely sure why they didn’t, because I think it undercuts just how much new stuff is here. Nonetheless, I’m going to itemize everything ‘new’ in the below list, which is largely in comparison to the existing Fenix 5 (non-Plus). Where new features originated with other Garmin watches, I’ve noted that.
Of course I dive into everything in this list (good and bad) throughout the review. This is simply aimed to be a consolidated pile for those wanting to quickly get up to speed:
– Added up to 16GB of full-color maps to all three Plus watches – 5/5S/5X (only 5X has maps previously)
– Added Garmin Trendline popularity routing data to map sets (first seen in Edge 1030 last summer)
– Added ability to use known elevation data from onboard maps + known GPS coordinates to calibrate altimeter
– Added music capability to watch (both direct music files and iHeartRadio/Deezer offline sync, started on Garmin FR645 Music first)
– Slightly improved Bluetooth headphone connectivity reception over Garmin FR645 Music.
– Added contactless NFC payments to watch (initially on Garmin Vivoactive 3, then other units since)
– Added Galileo GPS support via new GPS chipset (initially seen Galileo in Garmin Edge 130)
– Change GPS algorithms in conjunction with new hardware for claimed better edge case handling
– Improved antenna/communications chipset performance, should resolve sensor dropouts issues for mostly 3rd party sensors
– Added ClimbPro, which splits up climbs on courses into individual chunks (better explained in Navigation section below)
– Added PulseOx to Fenix 5X Plus (only), which is pulse oximetry data using onboard red-LED sensor
– Added full golf course dataset to all units (40,000 courses cached on watch now)
– Added Privacy mode for smartphone notifications on watch so that message contents aren’t displayed automatically (only upon wrist turn or button press)
– Increased battery performance to 32hrs in 1-second GPS mode and 85 hours in UltraTrack mode (for 5X Plus specifically)
– Increased price by $150 for base models
To consolidate everything in one tidy video I’ve put together this masterpiece of…well…something. It basically summarizes thousands of words into less time than it takes to drink 6 cups of coffee. Plus, everyone likes moving pictures.
Ready to get into the weeds? Then hold on, this review is a beast! Perhaps the most detailed and longest one I’ve written to date.
Unboxing:
There are nearly as many variants of the Fenix 5 Plus series as Brady Bunch kids. Actually, correction, there are technically more. Once you include Sapphire glass variants and DLC coating variants, then you’re talking 15 total variants – far more than the six Brady Bunch kids and three adult members of the show. Here’s an entire listing of the pricing variants (all prices dual USD/EUR):
Fenix 5S Plus:
Base (699): White w/silver bezel, regular glass display, sea foam silicone band
Base (unisex – Europe only) (699): Black w/silver bezel, regular glass display, black silicone band
Mid (799): White w/silver bezel, Sapphire glass display, white silicone band
Mid (unisex) (799): Black w/black bezel, Sapphire glass display, black silicone band
High (849): White w/rose gold tone bezel, Sapphire glass display, white silicone band
High (849): White w/ silver bezel, Sapphire glass display, leather band
Ultra (999): White w/ rose gold tone bezel, Sapphire glass display, rose gold tone metal band
Fenix 5 Plus:
Base (699): Black w/Silver, regular glass display, black silicone band
Mid (799): Black w/Black, Sapphire glass display, black silicone band
High (849): Gray w/Titanium (bezel/rear case), Sapphire glass display, orange silicone band
High (849): Black w/Black bezel, Sapphire glass display, black leather band
Ultra (1099): Grey w/DLC Titanium (bezel/rear case), Sapphire glass display, DLC Titanium metal band
Fenix 5X Plus:
Mid (849): Black w/ Black bezel, Sapphire glass display, black silicone band
High (899): Black w/ Grey bezel, Sapphire glass display, brown leather band
Ultra (1149): Grey w/ DLC Titanium (bezel/rear case), Sapphire glass display, DLC Titanium metal band
Now, I didn’t have all 15 editions to unbox. And even if I did, it’d be more boring than watching paint dry (even 15 colors of paint). Instead, I got three editions to unbox. A variant of the 5S+, 5+, and 5X+. Within the video I compare the sizes as well as weights, plus a look at it next to the Suunto 9.
As for this post, instead of unboxing all 15 variants, here’s a single edition unboxed – the Fenix 5S Plus mid-range variant without any of the fancy bands. First up, we take that box we saw above and remove its top:
Then, we take out the interior box and shelf holding up the watch:
Finally, we get the the parts removed. There’s not many parts. It’s merely the USB charging/sync cable, as well as the Fenix 5 Plus manual. Additionally, there’s a small warning guide. Oh, and the watch itself.
Here’s a closer look at the watch once removed from the foam insert.
The charging cable meanwhile is the same as the previous Fenix 5 series. No changes there.
And like the previous Fenix 5 series, the units still use QuickFit straps. Each watch has a different size strap though, so the 5/5S/5X all are different widths.
And finally, the manual. You won’t need it after this.
Note, I’ll be adding in a massive Fenix 5 Plus unboxing Festivus video of all the versions…once I finish editing the huge pile of footage from that and two other videos.
The Basics:
If you’re familiar with the Fenix or higher end Forerunner series (such as the FR935), you won’t find much of a difference in the Fenix 5 Plus range in terms of basics like activity tracking or such. All of that remains the same, save one single feature around privacy options for smartphone notifications that I’ll dig into in a little bit.
There’s no more natural place to start with the basics than the watch face. By default, this will show your current altitude, current heart rate, and date/time, along with your steps. But all of this is customizable, such as the data elements. You can blend from the default watch faces, or you can download gazillions of others from the Connect IQ App Store. Or you can stick a picture of your cat on the background too. Whatever floats your boat.
From an activity tracking standpoint, the unit will track your steps, sleep, stairs, and heart rate. All of which can be seen by pressing the up/down buttons and scrolling through the different widgets. You can also download other widgets as well for apps like weather (again, also from the Connect IQ app store). Here’s a small gallery of widgets on my watch:
The activity tracking data is then transmitted automatically to Garmin Connect via the Garmin Connect Mobile smartphone app. It’s here you can see all that activity tracking data. You can look at it on a per-day basis as well as a weekly and monthly view.
In the case of sleep, last week Garmin added REM sleep cycle data that you can view as well. The Fenix 5 Plus series supports that by default out of the box, and allows you to see a breakdown of sleep phases. This can also be plotted over various timeframes.
Note that Garmin devices do not account for naps however in your overall sleep metrics, which is a bit of a bummer. Though, most watch vendors don’t account for them either.
By leveraging the optical HR sensor on the back of the unit you’ll get two core 24×7 metrics displayed as well, which is 24×7 heart rate (HR), and 24×7 stress. The 24×7 HR measures at 1-second intervals and tracks your resting HR data. Resting HR can be used to track fatigue and is generally a good indicator of whether you may be getting sick or over-trained. I detail a bunch more on using that data here.
I will note that my resting HR values do seem more consistent here than some devices I’ve seen in the past. Specifically, it seems to be doing a better job of tracking my lower RHR values (i.e., low-40’s), than it used to, where it would seem to ignore those values when displaying the minimum RHR value for the day.
Finally, on the basics front, you’ve got smartphone notifications. These notifications can be controlled from the apps and notification centers on your smartphone itself. Though, there are overrides for aspects like ‘Do Not Disturb’ mode that you can implement on the watch itself. Additionally, you can specify whether you want notifications to appear during workouts or not, as well as non-workout times or not. All of this is customizable.
What’s new to the Fenix 5 Plus series in this scene is the ability to enable privacy mode for notifications. This allows you to not display the contents of the message (or notification) until you press a button on the watch or turn your wrist. The purpose of this would be sitting at a table/meeting with others and having notifications show up automatically. Perhaps eggplant and peach related texts from your BFF. Historically, these would instantly be shown for all to see. Whereas on something like an Apple Watch, these wouldn’t be shown till you rotated your wrist. Now Garmin follows the same methodology as those watches, and can restrict it until you want it shown.
This is a much welcomed change. While it’s still not as nuanced as Apple (in terms of waiting to show anything at all until your rotate-wrist), it’s definitely a boatload better. Note that by default the privacy notification mode is not enabled.
Want all the user interface/menu details? No problem – here’s a big long video that goes through all the menus, as I walk through the watch one section at a time.
Ok, that wraps up all of the non-sport specific things. The rest of the post is focused on the sporting/mapping/PulseOx/etc aspects of things.
Sport Usage:
Like aspects covered in the basics section, things are actually virtually identical to the Fenix 5 series in here as well (except some climbing/navigation/mapping pieces I discuss in the next section). However, do note the inclusion of Galileo GPS satellites, which I’ll briefly cover here, but also dive into more in the accuracy section down below.
To start a sport on the Fenix 5 Plus you’ll simply tap the upper right button to get the sport menu so you can select which sport you want.
There are piles of sports to select, including the ability to create custom sports and download apps that also operate in the same manner as a sport. In total, here are all the sport modes available by default:
Trail Run, Run, Hike, Bike, Bike Indoor, Open Water Swim, Triathlon, Golf, Navigate, Track Me, Map, Multisport, Treadmill, Indoor Track, Climb, MTB, Pool Swim, Ski, Snowboard, XC Ski, SUP, Row, Row Indoor, TruSwing (Golf related), Project Waypoint, Walk, SwimRun, Kayak, Strength, Cardio, Yoga, Floor Climb, Elliptical, Stair Stepper, Jumpmaster, Tactical, Boat, Other [Custom]
Phew.
Once you select a sport mode it’ll go off and find satellites and sensors if applicable. You’ll see the red line at the top turn to a green line for satellites. And any sensors will display once connected. This can be anything from cycling power meters to inReach devices to heart rate straps. Interestingly, the heart rate lock icon no longer displays by default here, rather, you have to press the ‘Up’ button to see that it’s locked. Battery status and smartphone connectivity is also displayed in this same spot. Personally, I think it should always show HR status over any other icon, given how important it is to get HR lock correctly. But I suspect they assume that you’re wearing the watch constantly so it always has HR lock anyway (probably a fair assumption).
Once ready to go you’ll press the upper right start button again to begin recording and tracking. At this point, it’ll leverage GPS and sensors to display stats applicable to your particular sport. For example, here’s a small gallery of data screens while running yesterday:
All of these screens are customizable, and you can create/add new pages/screens as you see fit (a crapton of them, more than I could create). There are also stock screens with certain data types, including Virtual Partner, Compass, Elevation, Map, and Music controls.
However, custom data pages can have up to four data fields on them, in a variety of patterns. You can choose the pattern and then choose the individual data fields to add to those pages:
There’s simply no watch on the market from anyone that has as much depth of data fields/metrics as the Fenix series. It’d probably take half this review in text to list them all. Even more so when you consider you can download what I’d presume to be thousands of data fields from Connect IQ as well for other data metrics.
For example, the Stryd Running Power Meter data field. This data field connects to the Stryd sensor and allows you to see running power as well as other running efficiency metrics. You’ll add this data field to your watch, and then from there you can add it to a custom data page.
This then displays that data during your run, and records it for access later on, to Garmin Connect (viewable on Garmin Connect as well as Garmin Connect Mobile smartphone app). It’s also in the recorded .FIT files, so you can use 3rd party apps to display the data too.
At which point you may be asking if the ANT+ related connectivity issues of the Fenix 5/5S are resolved? It appears so. Garmin themselves has said they redesigned aspects of the hardware here to address things, and my testing out on the road with Stryd on a Fenix 5 Plus shows clean data (whereas in the past I got useless/broken Stryd data on the Fenix 5/5S). One of the core reasons I went to the FR935 as my day to day watch is that it worked with Stryd. Here’s a nice clean graph from yesterday’s run with Stryd (or you can check out my Garmin Connect file here):
I’ve also had no problems connecting to other sensors. The only slightly notable exception to that is that I’ve found the Garmin inReach Mini, when attached to the back of my backpack, the connection drops a fair bit. Connected to the side of my backpack it’s fine. On the FR935 I didn’t seem to have the same issues with top/back of backpack connectivity. On the other sensor front, I’ve largely used power meters (Vector 3, Stages LR, Favero Assioma, SRM Exakt specifically), and the Wahoo SPEED ANT+ speed sensor.
Additionally, note that the Fenix 5 Plus follows in line with the Fenix 5 series in allowing connectivity to ANT+ & Bluetooth Smart sensors. The full list of sensor types is as follows:
So basically, anything and everything you could want. Also, it supports Garmin’s ‘Xero’ lineup of range finders/sights. The only notable exception to the list above is cycling ANT+ FE-C trainers, which are not connectable here.
You can save/connect multiple sensors of the same type. For example, if you have multiple bikes, each with their own cadence sensors on them, it’ll save those and automatically connect to them when those sensors turn on. Additionally, via data fields and apps, companies can create their own sensor types. We’re seeing that with aerodynamic sensors like what I’ve previewed recently in the AeroPod.
After your workout is complete you’ll get summary data from the workout that you can look at on the watch. This includes things like distance, calories, and heart rate zones. Additionally, you’ll get PR’s (personal records) displayed as well as recovery stats.
In addition, the Fenix 5 Plus supports all of the latest FirstBeat driven training load and recovery metrics. These are viewable after a run, as well as via the Training Status widget at any time.
When you dive further into this widget it’ll show you running and cycling VO2Max (cycling requires a power meter though):
Additionally, it’ll show your recovery time remaining until your next hard workout:
Lastly, it’ll show your training load over the last 7 days. Note that for VO2Max and load related stats, these stabilize best after 30 days of workouts. So initially the numbers in the first week or two are a bit fuzzy, and then they get more clear over time. With Garmin’s new Physio TrueUp you’ll get these records synchronized from other devices – like an Edge series device such as the Edge 1030.
I covered how Training Load works in last year’s Fenix 5 in-depth review, so check out that specific training load section for all the details (it hasn’t changed here).
Finally, your total workout information for a given activity is available on Garmin Connect and transmitted to partner sites that you’ve authorized (i.e., Strava). Here’s a quick look at two activities recorded via the Fenix 5 Plus watches. First is a hike in the Alps on the Fenix 5X Plus. Second is a recent run with the Fenix 5 Plus. Both of those links go to the actual activity itself, if you want to view it. In the case of the run, it was with Stryd, hence the additional data fields.
Phew, got all that? Good, it’s time to head into the mountains and talk mapping, navigation, and climbing.
ClimbPro, Maps, and Navigating:
For many people, when they saw the original Fenix 5 had mapping onboard they were pretty excited. Until they found out that it was only the largest of units – the 5X. Sure, that drove the 5X to be Garmin’s most popular seller, but it didn’t drive everyone to buy that watch. Folks like myself simply found it too big for their wrists.
With the Fenix 5 Plus series though, all watches – no matter the SKU or size – get full onboard mapping. Maps are included for the ‘region’ in which you buy it. Meaning that folks in North America get North America maps, folks in Europe get Europe maps, and so on. The maps provided are the ‘TopoActive’ map set, which looks like regular maps with topographic data atop it. While these maps are OSM-based (OpenStreetMap), they have a layer of special sauce that sits atop it, which provides what Garmin dubs ‘Trendline Popularity Routing’.
Essentially that special sauce takes the hundreds of millions of workouts uploaded each year and figures out the most popular routes from them. Basically just like a heatmap of sorts. That way when it comes to routing to a given point (if you don’t have a specific course/route assigned), it’ll leverage that data to figure out the best pedestrian or cycling-friendly route. Thus avoiding bad routes or routes that real cyclists/runners don’t actually use. This functionality was introduced back on the Edge 1030 last summer, and then continued into the Edge 520 Plus a few months back.
Note that you can’t see any ‘heatmaps’ on the Fenix 5 Plus maps, rather, it’s just data that’s used in routing decisions. In any case, here’s what a typical map looks like in a more dense area (up above you can see it in a less dense area):
I’ll circle back to maps in a moment while showing you routing, but I want to touch on the next new feature first – ClimbPro. This feature allows you to see the elevation profile of your climbs for specified routes. Now, I know what you’re saying: “But we could already see the elevation profile for routes”! And that’s true, but this (ClimbPro) splits up your specific climbs within your route. The problem with the overall route elevation profile is that the scale just doesn’t work well for longer hikes. That’s because the distance is too long, and you don’t really get the detail you want in terms of how long is this specific climb.
Thus, ClimbPro automatically slices and dices the climbs within your route and shows them individually. As you ascend each portion, it’ll list the elevation/grade/distance details for that specific climb. You can still see your overall route elevation profile on another page if you want, but this is all about the current climb. And honestly, it’s flippin’ awesome (when it works).
So, to decode up above, you’ve got:
Distance Climbed of this climb: 1.03mi Current Ascent: 676ft Average Gradient: 15% Vertical Speed: 1300ft/hour Time for climb: 1:36:03 (I had to take some fugly detours) Climb Number: 1 of 1
In my case for both of these high-elevation hikes, there was merely one climb – up a lot. Garmin says that if you had a route with multiple climbs on it that it automatically divides these climbs up for you. Unfortunately, living in Amsterdam, the only climb I’d be able to find is a canal bridge. Still, for my time in the Alps, it was super cool and became my default data page when hiking.
The only downside was that I did see some bugs with ClimbPro when I reached the top of the climb I got weird data displayed (i.e., non-valid climb profiles). When I had to go off-course in terms of route (i.e., due to snow), I got mixed behavior. In some cases it kept the ClimbPro page up to date on the vertical ascent/profile piece, whereas other times it lost the plot. I actually liked that it kept me updated about the climb even when not on the route, as spring-time hiking in the Alps means lots of diversions due to snow, landslides/past avalanches, brush not cleared, etc… So diversions are a fact of life. I suspect this will be sorted out soon enough.
A couple of final tidbits on ClimbPro. When in between climbs it’ll show details in grey for the next climb (upcoming climb). The elevation data is gathered from either that of the course creation tool (i.e., Garmin Connect), or if building a route on the watch itself, then it’ll use the DEM data within the pre-loaded maps on the watch.
Next we’ve got maps and navigation, which I’ll roll into one. The Fenix 5 Plus series takes the mapping aspects of the previous 5X unit and brings them to all 5 Plus watches. This means that when you buy a unit now you’ll get maps for your specific region. Thus if in Europe you get TopoActive Europe, and if in North America you get North America, and so on. What happens if you travel? Well, annoyingly you still need to either buy or download maps for those regions. Buying from Garmin costs money, but you can also use free OSM maps as well. I did this on one watch of mine when in the Alps, as that watch was initially loaded as a US unit. No big deal to do, but still annoying.
To put it in perspective, if you didn’t have maps for the region you were in, this is what you’d see (just your track and route):
The map page is visible from any outdoor sport profile that you want, and will automatically show your current track atop it. You can zoom in/out and pan around using the buttons, which works fairly well (and avoids the messiness of a touchscreen in harsh conditions):
When you want to go somewhere, you’ve got roughly two options for doing so. The first is to decide on where you want to go entirely within the unit itself. The Fenix 5 Plus includes a points of interest database within it, and thus you can find shops, monuments, and other POI’s directly on the device. At which point you can have it create a route to it (and it’ll use the previously mentioned Trendline Popularity routing as well):
You can also route from the watch to specific coordinates or saved locations, as well as just pick a point on the map. Further, you can have it create a course (hiking/running/cycling only) based on a preferred length (called ‘Round-Trip Course’), if you want the variety that is the spice of life.
The second method is to follow a specific course (which can also include past activities). When following a specific course it’s something you downloaded/transferred to the unit. These can be created using a variety of applications/platforms, including Garmin Connect itself (which means you’d also leverage that popularity data too). Transferring a route to the unit can be done via USB or Bluetooth Smart.
Once a route is on the unit you can access it via the ‘Navigate’ app or a specific sport app and selecting ‘Navigate > Courses’, which then allows you to specify a course and follow it.
Before you do so though, you can preview the course map (left), elevation (center), and climbs for ClimbPro (right):
Once on a course it’ll give you turn notifications as you approach turns, and detail on the remaining time/duration left in the course.
Now in the past you had breadcrumb trail navigation (without maps, except on the 5X). Where I’ve found maps to be particularly useful though is when you’ve got trails that splinter into a number of smaller trails. Sometimes with just breadcrumbs it’s difficult to know exactly which trail is the right trail, since you can’t see the other trails on the map to know which of three trails is correct. The below trail fork was a perfect example of that. When navigating without map details it was impossible to know which one was correct. I would have had to have gone a little ways on the trail and then waited for an ‘off-course’ error, or found out it was right by no error. With the maps, I could establish context immediately.
What you see above on the map is my planned route going up to the left, my past track down to the right, and then up to the right if you look carefully you see a dotted line of a trail. This part specifically (the dotted trail), made it easy to figure out which way was which in the woods.
Of course, plenty of people have gotten away without maps for years on their watches, and only have breadcrumbs. But at the same time, plenty of people have previously loved the 5X (or the Apple Watch with certain apps) and having maps on them. Once you’ve got the maps and have used them, they’re incredibly helpful. The only issue I take with Garmin’s approach is the loading of maps for outside your region. It’s just unnecessarily cumbersome and expensive. Other companies like Wahoo and Sigma make it easy/trivial/free to download OSM map data for other regions, whereas Garmin is charging $69+ for these OSM-based maps. And it’s not like Garmin’s download process is simple and seamless.
If Garmin’s download process took mere seconds to pick a region and then charged a small fee (such as $5-10 because of the added heatmap data baked in), I could kinda understand a fee. But the process today just isn’t as clean and easy as it should be for the higher price.
Still, at the end of the day for most people the newly included maps combined with ClimbPro and minor bonus features like being able to snap your initial elevation point to the DEM data from the map based on your GPS position, are all features that are much wanted and highly appreciated.
PulseOx (5X Plus Only):
Perhaps the most notable feature of the Fenix 5 Plus series is the one feature only seen on the 5X Plus: PulseOx. This is unlike anything Garmin has done previously, not because of the fact it has a shiny red sensor, but because of the fact that they’ve charted a course taking them directly into medical certification waters. First though, let me explain what it is.
PulseOx is the buzz term for pulse oxygen saturation levels, otherwise known as SpO2. There are multiple uses for this, but in the athletic sense, climbers have long used this at high altitude scenarios to monitor such levels. In doing so they can be more aware of situations which can lead to some pretty serious immediate health/safety/security issues. If you’re into high-altitude scenarios, there’s plenty of resources to read on the topic.
But ultimately, PulseOx gives you a specific value – such as 65% or 80% or 95%. if I’m at sea level and all is well, I could be at 98%. Whereas, if I’m at 10,000ft/3048m, then I could be at 85%. As I climb higher, that value decreases. But there is no specific hard and fast rule on what’s considered safe or not. It’s not as simple as saying 65% is cause for concern for everyone, because in some people it could be 75% or 80%. Whereas another person is 65%. Most climbing outfits will note it’s a blend of having a trained guide look at the numbers given alongside experience diagnosing someone. Still, it can be valuable.
In any event, as for the 5X Plus, it features a special red channel that is quite visible on the bottom of the unit. Meaning, it has extra hardware the 5S/5 Plus don’t have. Here’s the red LED when turned on:
Collecting a reading takes anywhere from 10 to 30 seconds, and is generally most successful when not moving (just pausing for a second while walking is usually good enough in my testing). This is in line with how most climbers monitor these levels today – pausing to use small sensors to take readings.
The Fenix 5X Plus will then spit back this reading and chart it over the altitude over the last 24 hours:
You can also see this data in a different chart over the last 7 days as well. My specific photo of this isn’t terribly ideal, since I wasn’t wearing the 5X all the time (was switching between watches), but you can get the idea:
You can manually take as many readings as you’d like, or alternatively you can have it automatically take readings. This roughly ends up being every 15 minutes or so, assuming you’re not moving. At this point the data isn’t yet plotted on Garmin Connect Mobile (the smartphone app), though that’s in the works. Note that if you set it to check every 15 minutes, you’ll burn through more battery.
In playing with this in the Alps, it was pretty cool to watch these numbers start to fluctuate as I climbed. And in the vast majority of cases they trended in the directions I expected. If I went higher, they’d decrease, and if I went lower, they’d increase.
The only issue I had some three weeks ago on beta firmware is that due to a reset during an activity, I lost the day’s worth of readings (right before I was set to take a super cool photo of it). While I haven’t had any resets since (and multiple firmware versions since), I can’t say for certain that this bug – specifically the lack of saving data – has been solved.
Still, the more immediate question you may then ask is whether or not this crosses into the realm of a medical device. After all, most PulseOx units that you’d buy are often considered medical devices. Garmin’s answer: Kinda, sorta, maybe.
It’s actually a bit more complex than that. See, Garmin has been working with the FDA on the medical device aspects. They, alongside Apple, Fitbit, and Samsung are all part of a pilot program/working group around ‘software medical devices’. This means that an app developer can come along and develop a specific app that is considered a legit medical device. For example, someone could come along and develop a Connect IQ app atop the PulseOx technology that’s fully certified as a software medical device. But the onus there would be on that specific app, not necessarily Garmin (or Apple/Fitbit/Samsung), to pass certification tests.
So that begs the question: Who might go forward on making such an app?
And funny enough – the answer there might actually be Garmin themselves.
When asked whether they’d consider it, they said it was “Well within their wheelhouse”.
Garmin says they’re pretty confident in their PulseOx technology, and are considering paying the $50,000USD fee to get the FDA certification, even if just “for fun”. They walked through some of the detail on that specific test, and it’s actually a surprisingly low bar (even compared to some of the rigors that myself and other readers put heart rate and GPS sensors to). For example, the FDA pulse oximetry certification test (see section 4) is done totally stationary indoors sitting in a chair. The person needn’t be standing or outside (both more complex). Next, the variance is +/- 3.5%, but that’s not a straight +/- 3.5 value, as there are allowances for outliers as well.
Which isn’t to say that Garmin is shooting for a lower bar. Everyone’s shooting at that same bar. Don’t hate the bar, it is what it is. And at this point, that bar has proven to be more than useful enough for boatloads of people globally to use SpO2 readings for a wide variety of applications. And Garmin deciding to fork out the cash to get it certified (which they feel pretty confident they’ll pass, based on their own testing), would be a significant milestone in consumer wearable companies moving into the medical device realm.
Finally, for those curious on why specifically they didn’t put it within the smaller 5/5S Plus units, the reason was a blend of a few factors. Garmin says that the battery constraints were less in the larger 5X (given its size it had more room internally), and atop that – they wanted to give something unique to the 5X Plus over the less expensive units. Similar to how the 5X (original) had mapping while the original 5/5S didn’t. It wouldn’t be hard to see this quickly shifting to other watches down the road if Garmin sees consumers finding value in it.
(Note: I didn’t specifically go out and buy a high-quality comparison testing device to compare against. Garmin specifically recommended the Nellcor Portable SpO2 unit, which is about $500-$600 if I were to consider doing so and wanted trustable results, mainly because they’re considered some of the best out there. They noted that some of the lower end $18 devices you’ll find on Amazon aren’t necessarily medical-grade nor high quality. I’m open to buying something that’s high-end enough to use on this and other future devices, so if you’re in the field, feel free to drop suggestions in the comments…and perhaps click that ‘DCR Supporter’ button while you’re at it… )
Music:
In a move that will surprise exactly nobody, Garmin has rolled out music support to the Fenix 5 Plus. This follows the Forerunner 645 Music this past winter and the Vivoactive 3 Music last week. In the case of all of Garmin’s music-capable watches, tunes manifest itself in two basic ways:
A) Manually copied music files: These are saved MP3 files, playlists and the like that you sync via USB cable to your computer B) Streaming services cached files: These are offline playlists/favorites from music services like iHeartRadio and Deezer, cached for playback when not near connectivity
The music features mirror that of the Forerunner 645 Music, edging out the Vivoactive 3 Music in a few minor ways. Specifically that the Vivoactive 3 Music lacks audio alerts for things like pace and laps, which the FR645/Fenix 5 Plus have. Second is that the Fenix 5 Plus/645 Music have the ability to add a music page to your workouts data pages, whereas the Vivoactive 3 Music lacks that ability, adding a couple extra steps to change songs mid-workout.
But let’s step back a second and talk about how you listen to music. To do that you’ll need a Bluetooth audio device of some sort. Headphones would be most common (here’s what I mostly used this time around), but it also could be a crappy Amazon Basics $15 speaker, or a not-so-crappy BMW car. In the Bluetooth audio realm, the world is your oyster. Except Apple Airpods. That oyster doesn’t work so well here from what I’m told (I lack them to test), as they also aren’t super compatibility friendly with other Bluetooth devices either.
In order to connect your headphones you can go through a variety of menus to pair them. Be it the normal sensors menu or the music-specific portions, all roads lead to the below. You can pair multiple Bluetooth audio devices if you happen to have that. Of course, only one can be used concurrently
Once paired up you’ll want to get music on the unit. The first method is via Garmin Express (Mac or PC), allowing you to ‘watch’ music folders (you can customize which ones), and then select playlists/albums/songs/artists/etc to transfer over:
Note that while you can sync podcasts, that has to be done via desktop. It can’t be done via WiFi unfortunately, meaning it’s…well…cumbersome for frequent updating. Garmin has said in the past that they’d like to get there, but it’s unclear if there’s a timeframe for that.
In any event, the actual process of syncing music is pretty darn quick, but the inventorying of even a small music library can take a heck of a long time. All Fenix 5 Plus units have 16GB of storage space on them, of which about 14.5GB is addressing. However, after maps and such you’re left with about 10GB of usable music space (which you can actually use for music). Note that you don’t technically have to use Garmin Express to move music onto the device. You can just drag it on via other apps as well…like Windows Explorer:
Next, there are the streaming services. As of today that’s just iHeartRadio, though supposedly soon Deezer. To get these files on, you’ll need to configure WiFi. You cannot sync these streaming services via USB (or Bluetooth Smart, which is too slow/bandwidth limited). In order to get started (in the case of iHeartRadio), you’ll activate your device to your iHeartRadio account online. Sorta like pairing up a new NetFlix device.
Once that’s done you’ll want to ensure you’ve got some playlists favorited/created/whatevered so that the Fenix 5 Plus can find them. From there go ahead and crack into the music settings to choose which playlists to sync:
The way Garmin has designed music on all their devices is via service provider model. This allows 3rd parties to relatively easily plug into said model. For example, Spotify or Pandora could reasonably join the platform and it makes it largely transparent in terms of adding additional services. You see this when you crack open music, as you’ll see service such as ‘My Music’ (the stuff you copied over via USB), or ‘iHeartRadio’ (self-explanatory), all seen as equals here. Deezer will show up in the same place, as would other services. Not to mention that Garmin recently opened up Connect IQ from a music standpoint as well.
In any case, when you first navigate to the music widget (just press up/down from the watch face), you’ll see the current album playing (if any), as well as controls around the edge, like a rotary phone. Handily, if you’re playing music from your phone already (as I am at this very second writing this), it’ll automatically default to showing album information and controls for the phone. A nice touch.
These controls are pretty easy to identify, and include the basics like skip/back/play/pause/volume/repeat and shuffle options, plus the all-important ‘Manage’ option, which is the little settings icon. By tapping that icon you get into the music providers and headphones areas.
It’s here you can select which music to play, be it streaming services music or manually transferred music. It’s pretty much as you’d expect, allowing you to choose anything from specific albums to playlists to artists. It’s easy to navigate, even when running along.
So how does playback sound?
Perfectly fine.
But as always, that’s more dependent on your headphones (or Bluetooth audio device) than anything else. Unless there’s some sort of dropout (which I haven’t seen here), then the audio quality is based largely on the devices your using. The biggest issue for wearable music devices tends to be dropouts between the watch and headphones, based primarily on distance. Most headphones have a ‘master’ communications side – either left or right. You can easily Google for which side is the master on your specific headphones. Wearing the watch on this same side will almost always resolve any dropout issues.
Still, I haven’t had that, unlike a handful of dropouts that I saw on the Forerunner 645 Music. Garmin says they’ve made some hardware design decisions that should help a bit there. As is usually the case in connectivity drop type issues, even the tiniest of changes can have dramatic impacts (as Garmin found out in the opposite direction with the original Fenix 5 and ANT+ sensors). Still, in this case, all seems well with the pile of headphones I’ve tested.
Of course, this section wouldn’t be complete without addressing what will invariably be commented on 23 times in the first day: Where’s Spotify?
As a huge user of Spotify myself (I’m listening to it right now on my phone, and have nearly 100 playlists in a reasonably OCD organized folder structure), I’m waiting for it as well. But ultimately, this isn’t in Garmin’s hands. Just like it’s not in Fitbit’s hands. Both these companies deeply want Spotify on their watches (just as much as people like you and I do). Instead, this is 100% in Spotify’s hands. They decide whether or not to work with companies like Garmin and Fitbit here. I spent some time talking with them about it back this past spring, specifically while at Garmin. While they see the interest in supporting what is now the #2 smartwatch platform (behind Apple), I got the impression they were hesitant to dip their toe into developing an app for it due to concerns that it wouldn’t be ‘complex’ enough (meaning, adding features like favoriting/etc…). And note when I say ‘developing’, Garmin/Fitbit/etc would of course be realistically the ones doing the actual developing of the app.
Hopefully though we’ll see a shift in things, but if you’re like me – the right people to bug here is the music provider of choice. Telling Garmin/Fitbit/whomever is useful and provides ammunition, but not as much as just telling your streaming music provider directly. I did my part, now do yours. :)
Garmin Pay (Payments):
Garmin first introduced payments last summer as part of the original Vivoactive 3. Since then it’s expanded to the Forerunner 645/645 Music, and the Vivoactive 3 Music. Adding to that now is the Fenix 5 Plus series. Garmin Pay is the branding that covers the contactless/NFC payments, just like there’s Apple Pay on Apple devices, Fitbit Pay on Fitbit devices, and Samsung Pay on Samsung devices. All of which allow you to use your watch to simply tap a contactless payment reader and pay for goods.
In the case of a watch, this is most useful in perhaps running or cycling scenarios where you have ‘known good’ stores that accepts contactless payments. Perhaps a coffee shop or such. Obviously, many people will still carry a credit card, but I’ve found it handy in some rare scenarios.
In any event, the first barrier to entry here is to actually have a Visa or Mastercard credit card from one of the supported banks. Each of these ‘pay’ entities must negotiate with individual banks, not just credit card companies. So you have to flip over the bank of your credit card and ensure that bank is on Garmin’s supported list. In general it’s still slim pickings, but it is getting better. For example, just last week they added Chase in the US, which is the largest issuing bank in the US – and a massive win for Garmin. More importantly, it means I can finally use it on my credit cards (since most of them are with Chase). Neither my Dutch or French credit cards are supported yet.
To add your card you’ll go into the Garmin Connect Mobile smartphone app and simply follow the prompts. It only takes 60-90 seconds.
As part of that, you’ll receive a confirmation text too, a simple validation code to enter in. Additionally, as part of that, you’ll get a pin-code to enter in before you can use a credit card on the watch. This passcode is good for 24 hours from entry, or until you’ve removed the watch from your wrist. This is in line with Fitbit and Apple.
To pay for something, you’ll go ahead and hold the upper left button to access the quick menu system, and rotate the dial around to the wallet icon. After which it’ll prompt you for the pin code.
At this point you’ve then got a while to tap and pay for something. Quick and easy:
Once completed it’ll give you a quick confirmation on the screen (and also ideally on your card reader).
And that’s it!
Now, the one downside is that it doesn’t give you a receipt/transaction total on your phone like Apple Pay does. So if the merchant doesn’t have a receipt system, that could be a problem for some. But virtually every merchant offers a receipt, so it’s unlikely to be an issue for most.
Ultimately, as with before – this works well enough, assuming you have a card supported and a store/shop that also supports contactless payments. In my travels I’ve found the adoption by stores to vary a lot. In Australia for example, it’s virtually impossible to find a spot that doesn’t accept it. I went without credit card or cash for months using just contactless payments. In France? You couldn’t go a day if you wanted to. Same with the US. Both certainly have stores that accept contactless payments, but hardly enough you could depend on entirely.
Of course, over time this technology will become completely commonplace in most countries/stores/devices, and thus, as a result, it will soon be as normal to pay with a watch as it is to pay with a credit card. For now though, I see it more valuable for ‘known good’ establishments that allow you to skip carrying a wallet to grab a coffee at the end of a run.
GPS Accuracy:
There’s likely no topic that stirs as much discussion and passion as GPS accuracy. A watch could fall apart and give you dire electrical shocks while doing so, but if it shows you on the wrong side of the road? Oh hell no, bring on the fury of the internet!
GPS accuracy can be looked at in a number of different ways, but I prefer to look at it using a number of devices in real-world scenarios across a vast number of activities. I use 2-6 other devices at once, trying to get a clear picture of how a given set of devices handles conditions on a certain day. Conditions include everything from tree/building cover to weather.
Over the years I’ve continued to tweak my GPS testing methodology. For example, I try to not place two units next to each other on my wrists, as that can impact signal. If I do so, I’ll put a thin fabric spacer of about 1”/3cm between them (I didn’t do that on any of my Fenix 5 Plus workouts). But often I’ll simply carry other units by the straps, or attach them to the shoulder straps of my hydration backpack. Plus, wearing multiple watches on the same wrist is well known to impact optical HR accuracy.
Next, as noted, I use just my daily training routes. Using a single route over and over again isn’t really indicative of real-world conditions, it’s just indicative of one trail. The workouts you see here are just my normal daily workouts.
I’ve had quite a bit of variety of terrain within the time period Fenix 5 Plus testing. This has included runs in: Paris, Amsterdam, Kansas, French Alps, Florida, US Virgin Islands, California, and plenty more. Cities and countryside, mountains, trees and open-air. It’s been everywhere!
All of the workouts you see here I did with Galileo enabled, mostly because I was curious how well it would perform given it was new.
First up we’ll start with going big here! This is up in the French Alps in Chamonix for a beastly climb in dense trees against the side of a mountain. In this test I had a Suunto 9 on one wrist (with BETA firmware), and a Fenix 5X Plus on another. Then, attached to my backpack I had a few more watches. Those being a Fenix 5S Plus, a Fenix 5 Plus, a FR935, and a Suunto Spartan Ultra. Just a few, right? Here’s the overall tracks:
It’s confusing, I know. Thus, we’ll zoom in a bit.
We’ll start with the ascent first, which is on the left side. The blueish line wandering is the beta Suunto 9 – it had a really bad day here. No idea why. Meanwhile the other tracks are very closely clustered. The FR935 is a bit offset from the group by I’m guessing 3-5 meters, but not bad. Overall, things are nice and crisp to begin.
Next, as we go up the mountain a bit you’ll see things remain very tightly clustered. The FR935 does seem to struggle in a handful of places briefly, though not significantly. If we look at the right-side of the track as I come back down, we see a tiny bit of separation on the Fenix 5X Plus specifically, but not the others. Not much, only 2-4 meters is my guess, but that green line just sneaks out the side.
Now this is the very top portion of the climb, with some really tight switchbacks. No, you might mistake that blue line for a trail, that’s still the beta Suunto 9…uhh…trailblazing somewhere. Because the below picture is kinda hard to discern, I’m going to zoom in a bunch to just that tight switchback section.
Well then, that’s a mess to look at.
So, I’m going to remove a few things, most notably everything but the Suunto Spartan Ultra (on my backpack), and the Fenix 5X Plus (on my wrist):
They’re very close. Note that due to snow and debris I wasn’t necessarily perfectly on the path. I would say these are both fairly close though, but I wouldn’t be able to tell you precisely which one was most correct here. Neither track is bad, and both make minor equal mistakes at varying times.
If you want to dig into the data sets yourself, this entire set is available on the DCR Analyzer here. Overall I’d say the Fenix 5 Plus did fairly strong on this, especially on the descent, where it’s really super tightly locked to the trail. This is generally what I saw throughout the Alps on my hikes – things were very very good from a GPS track standpoint, which was especially useful when I was navigating routes/trails with a map.
Oh, for fun, a brief look at altitude:
You can see the Suuntos and the Garmins each had their own sets of opinions about the starting altitude, and then things seemed to blend between the two of them towards the top. In theory, the highest I went was 2075m according to the chairlift I walked up against that had the elevation written on the side of it. The FR935 actually got the closest here at 2068m. But given every other watch was below this a fair bit, I’d question whether the elevation marker at the top of the La Praz chairlift is correct. Note there were three little ‘blips’ of elevation on some of the Garmin watches. What’s odd is that it did it at precisely the same second for a pile of them, especially at the end there, where I took a bunch of photos. My bet is something I did when lining up all the watches to take photos may have been the cause there.
Next, we’ll look at another run, this time in Paris. This one is a simple two-looper of the gardens, which can be a surprisingly difficult track. It’s often up against the tall fences, and with reasonably high buildings across the street and some good tree cover. For whatever the reason, this particular route seems to trip-up many a GPS watch.
Zooming in to the upper portion of the park, we see that the Fenix 5 Plus is the most correct in terms of exactly which side of the road I started on. It’s spot-on there.
The rest of the tracks in this portion of the loop from the Fenix 5 Plus look the best of the three. The FR935 goes through a building at one point (actually, a couple buildings). And the Suunto 9 goes through a fence briefly (not a horrible diversion, only a couple meters off).
Next, here’s the middle section of the park:
In this section the Fenix 5 Plus almost nails it perfectly, but makes one minor error I’ve highlighted in yellow, slightly overshooting a turn by a few meters. It does correct itself properly however a few seconds later. The (beta) Suunto 9 is the least correct when it goes through some trees across a few gardens.
Finally, the bottom portion of the gardens:
Above you can see how on that long skinny part sticking out the beta Suunto 9 cuts the corner entirely, while the FR935 and Fenix 5 Plus trace it cleanly. However, it’s not until you zoom all the way in that you’ll see the Fenix 5 Plus is actually the most correct, staying precisely on the sidewalk around that tip before I crossed the street over/around.
Next, we’ll shift to another run. I decided to include this because it’s neither great nor horrible. Just kinda ‘blah’. It was through neighborhoods without much tree cover (and certainly not dense tree cover). And it was along a mostly perfectly straight street. The high-level overview:
At a high-level it looks perfectly fine. But let’s zoom in a bunch:
You’ll notice in that section the Fenix 5 Plus wavers a bit. The other units largely nail that road and the correct side. But at one point it has me going through the gas station parking lot, which I did not do:
I included this run mostly to show you that it’s not always ‘holy crap’ perfect. Rather, it’s very good, but there are still the occasional quirks. If you saw this run on Strava, it certainly wouldn’t draw your attention. But it was worthwhile pointing out.
So overall on GPS accuracy? Pretty good. Here’s another hike in the Alps for those that want to dig into it. Looking at those tracks I’d say that at least once on that hike each watch had some minor diversions for a few seconds, but overall all watches were very close.
Note that I primarily tested Galileo accuracy, as opposed to plain GPS accuracy or GPS+GLONASS accuracy. Historically speaking some folks have had issues with GLONASS, despite in theory having more satellites and thus potentially better accuracy. There were certain use cases/scenarios were GLONASS didn’t perform as well as even regular GPS. In talking with Garmin about whether they felt a similar caveat might apply to Galileo, they said no, that they hadn’t seen the sort of caveats with Galileo that you have with GLONASS. My testing seems to support that.
Still, I’m interested in seeing more data from more folks on this, over an even wider variety of terrain than I tested. But for my purposes, I’m pretty happy with it.
Updated section – August 2018: Openwater swim accuracy. Since this review published I’ve had a chance to get in more openwater swims than I did pre-review. And the results more or less suck. The below video summarizes them. While this video is from late June, I’ve consistently tried every few weeks with new firmware since then (now mid-August), and the results are equally as sucky for the Fenix 5 Plus. Others are seeing the same. I’d say keep avoiding the Fenix 5 Plus if you’re needing half-way functional openwater swim tracks:
(Note: All of the charts in these accuracy portions were created using the DCR Analyzer tool. It allows you to compare power meters/trainers, heart rate, cadence, speed/pace, GPS tracks and plenty more. You can use it as well for your own gadget comparisons, more details here.)
Heart Rate Accuracy:
Before we move on to the test results, note that optical HR sensor accuracy is rather varied from individual to individual. Aspects such as skin color, hair density, and position can impact accuracy. Position, and how the band is worn, are *the most important* pieces. A unit with an optical HR sensor should be snug. It doesn’t need to leave marks, but you shouldn’t be able to slide a finger under the band (at least during workouts). You can wear it a tiny bit looser the rest of the day.
Ok, so in my testing, I simply use the watch throughout my normal workouts. Those workouts include a wide variety of intensities and conditions, making them great for accuracy testing. I’ve got steady runs, interval workouts on both bike and running, as well as tempo runs and rides – and even running up and down a mountain.
For each test, I’m wearing additional devices, usually 3-4 in total, which capture data from other sensors. Typically I’d wear a chest strap (usually the HRM-TRI or Wahoo TICKR X), as well as another optical HR sensor watch on the other wrist (including the Scosche Rhythm 24, and Scosche Rhythm+). Note that the numbers you see in the upper right corner are *not* the averages, but rather just the exact point my mouse is sitting over. Note all this data is analyzed using the DCR Analyzer, details here.
Note that while I’ve been using the Fenix 5 Plus since April, I’m mostly going to use recent data in this review – since that’s the firmware that it’s currently on and the production firmware that real world people are using.
First up is an interval run from two days ago, as we’ll just get right into the more complex workouts. This is compared against a Wahoo TICKR-X chest strap and a Scosche Rhythm 24 optical armband sensor.
As you can see, in the first two minutes there’s some disagreement. In this case, the Fenix 5 Plus is the most correct with the cleanest ramp of my HR. The Scosche 24 is the least correct, appearing to have lost lock or something. The TICKR-X lags along but catches up quickly.
After that things are pretty good for the Fenix 5 Plus for that steady-state portion that’s the first half of my run, including the build pieces. So let’s zoom into the interval bits.
Above you can see there’s a bit of disagreement. The blocky-nature of the TICKR-X is easy to throw out as incorrect in a few spots (seriously, I think this strap is dying on me as of late). And the bits of spiky green from the Scosche 24 are also easy to identify as incorrect. Surprisingly, the Fenix 5 Plus is most correct on the ramp and hold portions of each interval. However, where you see a little bit of slowness is on the recovery of the 5th/6th/7th intervals, where it lags behind a bit:
It’s not a massive amount, a few seconds or so in most cases, but definitely worthwhile noting. Overall though, for this particular workout it actually does the best of the three units.
Next, let’s do another interval run. Because interval runs are the bestest. This time comparing against a Vivoactive 3 Music (optical HR), and a Wahoo TICKR-X chest strap.
Overall, the Fenix 5 Plus actually didn’t do too bad for the first main build portion and the four main intervals. Those are actually pretty much spot-on, zero complaints there, even on the recovery bits.
But what about those four 30-second sprints at the end? Well…let’s talk about that:
So, here’s my breakdown of this section:
Purple line – Wahoo TICKR-X: This mostly lost the plot, with the exception of the 3rd interval’s recovery, which it got right.
Teal line – Vivoactive 3 Music: This was spot-on for #1/#3, but lagged recovery on #2/#4. Not horrible though
Red line – Fenix 5 Plus: This as good for #1/#4, so-so for #3, and crappy on recovery of #2. Thus a fairly mixed result for these short sections.
Thus overall I’d rank that interval run actually pretty good for the Fenix 5 Plus since it nailed the main 800m interval portions, though did struggle on a couple of the recovery bits for the 30-second sprints. I think most of us could live with that.
I’ll dig up some steady-state runs here shortly, but I can tell ya that things are pretty clean there, which is what I usually see…like below, where it was easily the most correct of the four watches (as an aside however just looking at that file set, that run had a bizarre GPS track from the Fenix 5 Plus, that I hope was a bug on a previous firmware version, I’ve never seen a track quite like that).
Lastly, we’ll look at a ride. GPS accuracy on rides is rather boring (it’s been perfectly fine), but heart rate accuracy is more fun. This ride was from yesterday, a simple one-hour ride with a bunch of stop/starts for lights/signs, and a few sprints. Also, some grated bridge decks, which are always tricky for any HR sensor. In this case, you’re seeing the Suunto 9 optical HR sensor on one wrist, the Fenix 5 Plus on another, and the Scosche 24 as well. The Wahoo TICKR-X I had worn totally died about 10 seconds into the ride (like, red light stayed on died).
As you can see above, the units actually track fairly well, matching effort as well. Right out of the gate the Suunto 9 loses the plot, but locks on pretty quickly. After that point there’s only two specific spots of disagreement from the Fenix 5 Plus. The first is here:
In this case, I had stopped pedaling and you can see the other two units properly decrease HR, whereas the Fenix 5 Plus doesn’t recognize it immediately.
And the next is a bit later in one big chunk and then a few short spikes/drops.
So it’s definitely not perfect. But those of you that have been following my trials and tribulations with wrist-based optical HR sensors and cycling will note this is actually pretty darn good for a Garmin sensor on my wrist and cycling. I was somewhat surprised to see this.
Which is probably the overall theme here – while Garmin hasn’t claimed any major improvements with the Fenix 5 Plus series and optical HR sensors, it seems like whatever minor improvements have been made have gone a long way. You can see my interval sessions were largely pretty good, and while my ride wasn’t perfect, it was hardly throw-away either. I suspect for most people, if they get results like I’ve been seeing, they’d mostly be happy with it.
Product Comparison:
I’ve added the Fenix 5 Plus series into the product comparison tool, which allows you to compare it against any watches I’ve reviewed to date. I added all three units under a single product ID, and noted the differences accordingly in the handful of data fields that differ. This helps keep things from getting all crazy.
For the purposes of the below table, I’ve compared it against the existing Fenix 5 and the Suunto 9. But you can easily mix and match against any other products within the database here, by creating your own product comparison tables. Note that in some cases nuanced features (like being able to calibrate altitude based on the map DEM data), doesn’t really fit well into product comparison tools designed to host hundreds of watches (when only a single watch has it).
There’s zero question that Garmin is nailing their stride with the Fenix series. The inclusion of music, contactless payments, and maps across all devices are precisely what most users have been asking for. Meanwhile, Garmin’s also answered power users who have been asking for potentially higher GPS accuracy with Galileo support, not to mention addressing the connectivity woes for ANT+ sensors on the original Fenix 5. And then finally adding in Pulse Oximetry support and the ClimbPro bits, to differentiate themselves in a way not seen before. There’s no question this feature is targeted directly at the high-altitude folks that historically would have gone Suunto.
Of course, no watch is perfect. And as one might expect, no matter how much I test this device (two months now) and no matter how many Fenix 5 Plus devices I have in my stable (six units), I simply won’t be able to find every situation or quirk out there. Still, I have seen a few during my testing in the beta period, some of which may have been resolved. For example, I’ve seen some odd quirks with ClimbPro when I reach the top of all climbs (or start descending). And then there was the one reset I had three weeks ago losing PulseOx data. And some slowness on openwater swimming distance readings on the unit itself.
Areas I haven’t seen issues though are GPS accuracy, or 3rd party sensor connectivity. My testing with Galileo GPS enabled has produced incredible tracks, as many of you have unknowingly commented on within my Strava uploads the past month or so. And music hasn’t been an issue either, that’s working well for me. And perhaps most notable is that I’ve been wearing it 24×7 and it just works as it should from a daily watch standpoint. Of course, I still wish I could answer incoming texts and such with quick replies, but in my case that’s primarily an Apple limitation of being on iOS. Fitbit and others share the same 3rd party non-Apple Watch walls.
Of course – all of this skips the elephant in the room: Price. Starting at $699, it’s $150 more than the existing Fenix 5 series (base price), which is a huge jump in a time-frame when watches with music are getting cheaper (the Fitbit Versa at $199 with music, $229 with contactless payments). Even Garmin’s own Vivoactive 3 Music was introduced at $299 – effectively the same price the Vivoactive 3 has been the majority of the last year. I’m not sure this is the right trend. I suppose it’s up to Garmin to find out.
In most ways, the Fenix 5 Plus series should likely be called the Fenix 6. It’s got far more features than a mere ‘Plus’ designator deserves, both in terms of hardware updates as well as software ones. I feel like Garmin is likely doing itself a disservice here in underselling how much has changed. But, that’s their problem, not mine. From my standpoint, I’m more than happy with the watch and it might actually be enough to convert me from my trusty Forerunner 935. We’ll see.
Found this review useful? Wanna support the site? Here’s how:
Found This Post Useful? Support The Site!
Hopefully you found this review/post useful. At the end of the day, I’m an athlete just like you looking for the most detail possible on a new purchase – so my review is written from the standpoint of how I used the device. The reviews generally take a lot of hours to put together, so it’s a fair bit of work (and labor of love). As you probably noticed by looking below, I also take time to answer all the questions posted in the comments – and there’s quite a bit of detail in there as well.
If you're shopping for the Garmin Fenix 5 Plus (5/5S/5X) or any other accessory items, please consider using the affiliate links below! As an Amazon Associate I earn from qualifying purchases. It doesn’t cost you anything extra, but your purchases help support this website a lot.
And finally, here’s a handy list of accessories that work well with this unit (and some that I showed in the review). Given the unit pairs with ANT+ & Bluetooth Smart sensors, you can use just about anything though.
This is a dual ANT+/Bluetooth Smart cycling cadence sensor that you strap to your crank arm, but also does dual Bluetooth Smart, so you can pair it both to Zwift and another Bluetooth Smart app at once if you want.
This is one of the top straps I use daily for accuracy comparisons (the others being the Polar H9/H10). It's dual ANT+/Bluetooth Smart, and in fact dual-Bluetooth Smart too, in case you need multiple connectons.
Seriously, this will change your life. $9 for a two-pack of these puck Garmin chargers that stay put and stay connected. One for the office, one for your bedside, another for your bag, and one for your dog's house. Just in case.
This speed sensor is unique in that it can record offline (sans-watch), making it perfect for a commuter bike quietly recording your rides. But it's also a standard ANT+/BLE sensor that pairs to your device. It's become my go-to speed sensor.
This wifi-connected scale will track your weight and related metrics both on the scale display and in Garmin Connect (plus 3rd party apps like TrainingPeaks). It'll also then sync your weight to your watch/bike computer, to ensure accurate calorie data.
The HRM-PRO Plus is Garmin's top-end chest strap. It transmits dual ANT+/Bluetooth Smart, but also transmits Running Dynamics & Running Pace/Distance metrics, stores HR data during a swim, and can be used without a watch for other sports. Also, it can transmit XC Skiing Dynamics as well.
And of course – you can always sign-up to be a DCR Supporter! That gets you an ad-free DCR, access to the DCR Quarantine Corner video series packed with behind the scenes tidbits...and it also makes you awesome. And being awesome is what it’s all about!
Thanks for reading! And as always, feel free to post comments or questions in the comments section below, I’ll be happy to try and answer them as quickly as possible. And lastly, if you felt this review was useful – I always appreciate feedback in the comments below. Thanks!
Hi! Beautifully thorough work as always, so thank you!
The biggest draw for me are the maps and map related features. Specifically, trail maps here in the Northeastern US.
Is there someplace I can visit online and see the same mapping detail that will be loaded on the 5plus? I’d like to know that the trail systems at my 7 or 8 favorite parks are included in the maps before I take the plunge!
In my case, it just showed the ClimbPro feature the same way when I went back down the hill. It didn’t seem to show it in reverse. I asked Garmin whether that was a bug or by-design, but didn’t get clarity on that one.
If the routing and maps are the same as the latest on the 1030 (FW5, 2018 maps) then they will be fundamentally broken and won’t route properly, see this post where I try out Garmin popularity routing on one of the most popular cycling roads in the world (Richmond Park in Surrey), and Garmin is the only routing engine that gets the incorrect route (both on Garmin Connect and on the 1030)
Somewhere in the complexity of the interface you can switch off “avoidances”. The default is to avoid unpaved roads. Not sure if that helps as I haven’t tried it yet. It is difficult to know how good it as the popularity routing heat maps are not displayed. There are heat maps on Garmin Connect in the route builder but they are pretty immature and miles behind Suunto Movescount or even Strava. Circular route building on Garmin Connect is pretty broken too. Garmin are good at concealing the performance of some features (e.g. nav & GPS performance).
I used this on my 5X+ 3-4 times now
Works fine but
1. Typing in the PIN is hokey, you are better off with a PIN in decreasing order like 3-2-1-0 cause scrolling is a pain
2. As soon as I used the Garmin Pay, Apple Pay on my phone stopped working- I get “insufficient fare” now when I use Apple Pay- same credit card
3. This morning after ApplePay rejected me – I brought up Garmin Pay – and it let me proceed and charge my train fare WITHOUT ASKING FOR A PIN – Big security fail
Ok – figured out part 3 – no PIN – Garmin Pay stays enabled for 24 hrs or until it can’t detect the HR or you disable HR – ie as late no as it thinks it’s still on you since you typed passcode
I had a Fenix 5X and now just have a 5X+. Both are European versions.
On the Garmin website, it is said that the both units have topo and cycling maps.
On the Fenix 5X I had both, when going in maps selection menu, I could see both and select the one I want to use. There are actuality three maps for Europe TOPO East, TOPO West and Cycling).
But on the 5X+, there are only two maps TOPO East and TOPO West, no cycling map even if the specs on the Garmin website say that there is a cycling map onboard.!
For those who have a 5X+, is that also the case on your device ? Please specify if you have an European or US devices.
Just as a general FYI for folks, I finally got around to editing and uploading that mega-unboxing video of the three different editions (5S+/5+/5X+). All of which you can find here: link to youtube.com
Hello Ray, thanks for all of your efforts, and continued responses to the never-ending questions. And here’s another on for you! I hope it hasn’t already been answered. I’ve read through all of the posts (I think) but I could have missed something.
Anyway, in your conversations with Garmin, have they mentioned whether or not the GPS chip is all-new? Or if it’s the same one as is in the non-plus? If it’s different I’ll definitely give it a try, but if it’s the same, I’ll stick with my 5X.
As info, I’m curious because I’m one of those people that is unhappy with the GPS reliability. I know it’s a YMMV situation, but for me, it’s pretty bad. I regularly walk to work through downtown Seattle, starting at roughly Denny and Aurora (you’re an ex-Seattleite, so I’m sure you know the area) and ending just south of where the Kingdome used to be. It’s a 3.2 mile walk, but my 5X will regularly show it as a 4.5, or some other, longer walk. The other day it didn’t get a lock until I had 1 mile to go, then, when I started the track function, it logged 2 miles. I was pretty impressed with my 8 minute walk times, but…
Anyway, this isn’t intended as a bitch session about a version you aren’t reviewing here, just trying to dig up chipset info. Oh, if you’re interested, I did install the beta 9.71 firmware with Galileo support. It appeared to get a lock faster (still slow), but did nothing for the accuracy.
They seem to imply it’s all new in conversations, but they don’t disclose specifics of GPS chipsets. Usually we have to wait for the first GPS chipset update via firmware for someone to find out. I can’t imagine that’ll be long. Usually it happens within a month or so of a new release.
Yeah, walking that route for pretty much any GPS will be tough (assuming you’re roughly going through the downtown core). You might as well just take the transit tunnel instead, probably has cleaner* signal in there. :)
That said, it sounds like you’re starting before you’ve got lock. Which is definitely a deal-killer. It makes everything bad. It takes a bad situation and makes it worse, because it’s trying to find lock in a tough scenario. It’s far better to wait the minute or two extra in high buildings than to try and go and lock. Also, when in bad signal areas (like NYC), I usually wait another 15-20 seconds before starting after lock. Or until my pace screen shows ‘0:00’.
Hey Ray, how robust is the sapphire glass? I have really good experience with the Polar V800 glass, it survived all accidental hits and impacts over the years and I wonder if the Garmin sapphire is as strong.
I have a Fenix 3 Saphire and I am clumsy.
While the bezel has some marks, the glass is like new.
ON several occasion I hit the glass hard on metal objects and not the smallest scratch or nick.
I have not had any issues with standard and sapphire glass on fenix devices. I am not sure what the material is for the non-sapphire versions but it is incredibly tough and scratch resistant. The big issue for me is that the sapphire glass reflects more light reducing the contrast of the display. Certainly something to consider if you are 45+ yrs. The V800 is much clearer.
I have a big scratch on my Vivoactive 3 glass after about a month. There seem to be very different results on regular glass. Wonder if it is an inconsistency in manufacturing or just luck. I agree the sapphire is very tough. Are the issues with the reduced contrast indoors, outdoors, or both? I am 50+ so do have some issue with the small fonts on the VA3.
Hi Ray, thank you for your awesome review as always. Could you please elaborate on the real life battery life in activity using GPS and HR? I would love to buy the Fenix 5s but the estimated 11 hours of GPS battery life is not that much for an Ironman race (for many people at least). I read a review where they tested the GPS battery life of the Fenix 5 plus and they said it is actually longer than the Garmin claim and very close to regular Fenix 5. Could it be the same with 5S plus? Thank you very much! Stepan
Hey question regarding garmins wrist based heart rate monitors. Do these still work accurately if you turn the watch around your wrist so it’s on the palm side? I know that tightness and placement is important but not sure how accurate it would be for this method.
I think reason it is not called Fenix 6 is simply and purely marketing based. Now they can still keep selling plain 5 that is still current model, and get bonus bucks from plus model. If they went with F6, F5 would instantly became obsolete model in eyes of many.
BTW plain old Fenix 5 got major updates as well last week with beta SW:
– Many small fixes
– Galileo support
– Abnormal hearth rate alerts
– Stryd running power now supported by Dozenrunfield
Last one is big for me at least, because of stupid maximum of two iQ-apps running at any one time. Now I can have Dozenrunfield, Stryd power and battery usage tracker/logger/estimator all running at the same time!
This is merely a connect IQ data field not native Stryd support. Stryd already produce one. Unlike the Stryd Connect IQ app, it does not show your Stryd power zones. If you want power zones you have to use the app. When you use the app you are unable to use workouts or navigate routes. Its a bodge and does not get Garmin off the hook. I suspect their firmware is pretty crammed in (I remember a comment by DC on the Fenix 3) through implementing other features so they think an app can get them off the hook. Same is true for their Garmin Labs app for power.
hello there – i’ll probably be the only one (first one?) raising this but my first run with the Fenix 5 plus showed incredibly inaccurate results. Much worse than the old 5, literally unacceptable. Setting was on GPS + Galilei, running by a river with forest around.
will write to Garmin and send the map for exemplification. Interesting that during the run, the map showed the course properly (running a mapped path) but after the run, the results all over the place.
I have been disappointed with GPS accuracy on my new Fenix 5 plus. I think the problem with modern Garmin watches is the antenna design. We have sacrificed good GPS reception to achieve a round watch with nothing protruding in order to echo some forgotten era of mechanical chronometric excellence. Adding in an additional single frequency set can only do a little if anything.
There is an option in navigation to snap to map routes. This is normal behaviour for car GPS as it generally assumes you are on the road. Might explain the apparent OK real time performance and subsequent poor recorded tracks if this setting is on.
I also note that DC says Garmin store a simplified route with fewer data points and looking at tracks exported from Garmin Connect this is true. What I don’t know is if Garmin also approximates the GPS locations of the points they store so that they are grainy / snap to a grid / are quantised if you get my drift. This might explain why they look so bad close up. Saves space on the server.
Garmin make it pretty hard to objectively compare performance. UltraTrac which some would assert is the equal of FusedTrack but without revealing the route. Popularity routing but without revealing a proper heat map. Cloud storage of approximated GPS routes. Its all snake oil.
This is not the fault of the engineers who I think have done amazing things, particularly with the Connect IQ
SDK. They will know how to produce a good antenna. This must stem from senior managers who have lost customer focus and impose irrational constraints. Ultimately this will be driven by shareholders. This is the stellar lifecycle of many companies, from start up enthusiasm and customer focus to middle aged complacency eventually leading to a general decline as shareholders suck the very life out of the enterprise. They are sucking hard now as they can see what is on the horizon from the up and coming Chinese stellar nursery.
P.S. Did you set to Galileo (Galilei) or just any old Galilei? That might be the root of the problem! (-; Just kidding!
I’ve had the f3 HR since it first came out. I just got the f5Xplus. I did notice a very slight difference in weight at first when taking off the f3 and putting on the f5Xplus. I’ve been wearing it for a couple of days now and it doesn’t bother me. If your used to the f3HR it shouldn’t bother you, but if your used to smaller watches then maybe it might. I got mine from clevertraining.com. They have a 60 day satisfaction guarantee.
Regarding notifications: I can’t find the information anywhere, but will Fenix 5S / 5S Plus show entire text messages (also emojis) or only the first couple of words?
I had Garmin products earlier but am using an Apple Watch S2 at the moment. However, would like to return to the Garmin Connect app as I also is looking into the Edge 130 for my bike.
put my 5x an 5x+ outside with free look to the sky, gps (only), temp sensor connected, tracking enabled and map page as main screen. Device was not moved during runtime.
5x: 14 hrs 15 min, 6,07 km movement
5x+: 29 hrs 40 min, 7,13 km movement
Of course the battery of the 5x is older, but did that test in early owning times of my 5x and didn’t get much more runtime.
Btw having seen the total distance of the wobbling positions I always wonder why Garmin did not add the minimum distance as a threshold for GPS trackpoint recording. It is much better than either the smart recording or one sec recording to apply a minimum distance of 3-5 meters. Since in case of good GPS positioning the unit does not collect the unreal small noises as distances.
My thoughts entirely. I am sure some other watches do this as they do not seem to suffer the same inexorable increase in measured distance when stationary.
So far pretty underwhelmed by my new Fenix 5 Plus.
1. Battery life is abysmal. Charged to 100% yesterday. Did a couple of walks and one run. No music. Down to just 15% remaining this evening. This is not much better than an Android smart watch! For me this is an absolute deal breaker.
2. GPS accuracy seems mediocre at best. I did not find that switching on Galileo improved matters. Although the recorded tracks seem just about acceptable the real time positioning is sketchy. Not sure how to explain that. When following a route a really important factor is that the displayed track is stable and in a consistent direction. The route with map was frequently in the wrong direction (up to 90 degrees out) and would jerkily move around as it refreshed the map. Of course there is a map and I can relate the map to the ground and with a bit of thought work out what is going on and where to go but frankly when running a trail I don’t want that complexity.
3. The interface is rather chaotic. I have got used to the F3 despite it being a little irrational. This seems worse. Navigation is now via an App but once I select a route it does not give me a choice on activity type. Interestingly it seemed to default to a run and then randomly applied an unwanted workout that I had recently sent to the device. I now access my Stats via a widget. A rotating wheel menu is accessed via a long press on the light button. The impression is of an old building that over the years has had newer wings added to it in different architectural styles.
4. It crashed on a couple of occasions attempting to stitch together a circular route. The circular routes do not seem to take into account true local heat maps. Not sure what data they are using as they don’t show these on a map. I ran along the river Severn today in Shrewsbury. It tried to take me through an industrial estate rather than along the popular running track through woodland and meadow near the river and canal.
5. Music quality seems worse than on my Polar M600. It has an annoyingly excessive and distorting bass.
On the bright side:
I was happy with the wrist HR which I think works OK (the old sensor on my F3 HR was awful and locked onto my running cadence).
The display is I think a little higher contrast and has a wider viewing angle than the old F3 plus the fonts are bolder and a more standard aspect ratio so clearer.
I suppose there is no market in rationalising, streamlining and perfecting what Garmin have already achieved instead of adding in headline grabbing new features. I think my old 920XT is my favourite Garmin watch and despite being forever hopeful I seem to be invariably disappointed with their newer offerings. The marketing worked on me and I was suckered in. I have now initiated the return process to Cotswold Sports.
I think I will go back to either my Suunto A3 Peak + Polar M430 or FR920XT + Polar M430.
I will keep my fingers crossed that Polar get their finger out and get it right with a V800 successor! (if there is to be one).
2. I can switch off the maps for a particular activity such as running. I will see if this improves the stability of the orientation of the displayed track when following a route and whether this also improves battery life.
4. I note that you can switch off “avoidances” in the map settings for an activity such as avoiding unmade routes. I have disabled avoidances and will see if this improves round trip routing.
I found that when doing a cardio workout, the heart rate sensor on my new fenix 5X plus is not very responsive. I compared it to my fenix 3HR and a heart rate strap. The heart barely moves. I’m seriously thinking about returning it. Anyone else experience this problem.
Hi there Ray, as always your reviews are fantastic.
My question is plain and simple and it is if the chipset for the plus version has been changed from the older non plus Fenix 5.
Hey I just would like to know, wheter they changed something on the barometer issue. I did buy a fenix 5 instead of 3 HR in hope of getting accurate barometric measurements. Unfortunately my barometer did not work twice on two fenix 5 models, so I gladly returned it via amazon. As I mostly use the watch for mountaineering, ski touring and trailrunning accurate height and weather information is crucial to me. When they did not change something I will likely change to something from Suunto. Lots of friends have devices from then and even when there is no super hipster direct instagram upload of your daily calorie intake the altimeter works properly even on the cheapest models.
DCR, if you’re talking about Spo2 (oxygen saturation) , I guess you’re, the description on what is normal and what is not is terribly inaccurate. Normal is above 95%. Anyone with spo2 below 80 will suffer brain damage.
quote:”But ultimately, PulseOx gives you a specific value – such as 65% or 80% or 95%. if I’m at sea level and all is well, I could be at 98%. Whereas, if I’m at 10,000ft/3048m, then I could be at 85%. As I climb higher, that value decreases. But there is no specific hard and fast rule on what’s considered safe or not. It’s not as simple as saying 65% is cause for concern for everyone, because in some people it could be 75% or 80%. Whereas another person is 65%. Most climbing outfits will note it’s a blend of having a trained guide look at the numbers given alongside experience diagnosing someone. Still, it can be valuable.”
The normal Sp02 for humans breathing atmospheric air at sea level measured with a medical grade device is 94-98%. Whether anyone suffers long term ill effects (such as neurological damage) for a given level of hypoxia depends on the duration of hypoxia, genetics and the duration and level of acclimation to altitude. The time of useful consciousness for an unacclimated individual at 25,000 ft is less than 4 minutes. At the end of this the median Sp02 is around 60%. This exposure is used routinely in pilots to demonstrate hypoxia (USAF, RAF etc…). I am not aware of any recorded cases of acute neurological damage as a result of this. Sp02 is just one measure of hypoxia. Neurones really only care about pA02 which is not linearly related to Sp02. Climbers on Everest without oxygen typically have Sp02 levels in the 50s. Medical grade pulse oximeters are not licensed for use below 70% saturation are probably not reliable at these levels. Peripheral oximetry is less reliable than central oximetry. Sp02 does not predict the likelihood of Acute Mountain Sickness.
This tech is merely a gimmick. At best it is useless. At worst it might provide false reassurance to a climber and increase the risk of death from AMS. One should respond to symptoms and descend, then descend, then descend again.
I think Garmin are legally exposed by including this sensor. It is, however, a small population and they are a big company so can probably afford to take the hit. It is, after all, another marketing feature. Yay!
Climbers are and have been using pulse ox sensors for years in high altitude climbing. This isn’t some mystery area here. Nor is it out of the norm. As I noted in the post, it’s primarily used as a backstop to monitor, not as the end all be all. But it is common.
At sea level? I agree, I’m not seeing the value. But for this specific target, it is actually legit useful to track – certainly more useful than many other metrics. From a legal standpoint, they’re no different than any other FDA approved device (if they do so). Relatively simple really there.
FDA approval will be for a device used within constraints and for a particular purpose. I suspect climbing will be outside of those. I agree climbers have used these devices but I am not aware of an evidence base for their use. Custom is not evidence of value. They are just freely and cheaply available. Sats are ill conditioned on the steep part of the oxygen dissociation curve and sensitive to conditions such as activity/stress during measurement. The best monitor of oxaemia is the brain. If you feel ok and act ok you are probably ok. If you don’t then numbers from a sats sensor can only provide a false sense of reassurance. Sats is not partial pressure of 02 in your circulation which is not partial pressure of 02 around a neurone in your brain. Of course I could have got it completely wrong through looking at things through the eyes of a sceptical old man. Do you have any links to peer reviewed publications demonstrating the value of pulse oximetry in climbing?
True on FDA testing, but only because the FDA test for such a device requires the person be seated in a chair (just about strapped in), and that such a chair be indoors, etc… I linked to all that in the review.
But that doesn’t change the fact that climbers have been using these devices for years in other realms, and by and large the results seem to help guide folks. The problem with using the feel OK/act OK/etc is that the brain sucks at deciding what’s OK in high altitude situations. That’s generally why you have others with you to help, and the data is a good backstop of that. Cycling Tips actually did a pretty interesting bit on this a few months back cycling to Everest and talking about some of the challenges there, especially for those not familiar with attitude.
As for research, this* links to a number of studies that talk to certain aspects of the picture. As I noted as well, the paper talks to using others in your group (primarily trained people) to validate that the data your seeing matches the signs your seeing. There are caveats, but it appears to concur there’s certainly value in such devices at high altitude but to essentially use them more for ranges than super precise measurements. Basically, akin to how people use step counters today – focus on the trending and not so much on whether it’s 71% or 73%.
I suppose having continually worn oximetry allows for the collection of data that would not have been possibly simply by taking readings while sitting resting. This would be new and uncharted territory. It would be interesting to relate saturation to power. I guess if your saturation drops too dramatically for a small metabolic effort you have a problem.
I currently use a fenix 5s and notice that pace jumps around pretty significantly while running. Seems accurate over the course of a mile, but not so along the way. I was wondering if you have noticed this and if it is any better on the fenix 5s plus. Thanks.
Can you tell us what maps are pre-loaded on the Fenix 5X plus ?
Are there only the Topoactive maps (two for European models = Topoactive Europe Eats and Topoactive Europe West) or is there also a separated cycle specific map (a map that can be activated independently of the Topoactive maps) ?
Ray, I’m currently wearing the Fenix 3 and I feel confortable with it, and thinking to switch to either the 5X Plus (same physical size than the 3, but 10gr heavier, and 2mm thicker) or the Titanium 5 Plus (which is considerably lighter). Both have the same retail price, so it is my understanding that the difference will only be the Pulse OX feature.
I’m a marathon runner, and do some swimming. What would you recommend? Is the Pulse feature worth it? or should I go for a smaller size and less weight?
Additional question, for the maps, I live in Mexico, but will buy the watch in the US, do you know if the maps cover Mexico, or will only be for US and Canada?
Pulse oximetry is not going to be of any value if you are running or swimming near sea level as it will be around 94-98% and unaffected by activity (assuming you have no underlying lung condition). Some mountaineers feel it is of value but the evidence base for this is shaky. I suppose it might be mildly interesting to see a small drop in sats when on an airliner (cabin alt of around 6000-8000 feet at altitude) though the shape of the oxygen-haemoglobin dissociation curve minimises this. It could be useful for pilots where hypoxia is an ever present threat if it were combined with a strong and continuing alert (vibration as a beep would not be heard) (cf storm alerts).
I was wondering if the oximetry (if it makes it’s way into the D2 series) could be used to alert pilots for hypoxia.
Could it also alert pilots that are at risk of CO2 poisoning?
(The other thread in general aviaiton cockpit).
There are tiny (2-4%) reductions with maximal activity so not really of value. Certainly of no use to distance runners. The numbers will not correlate with LTHR or rFTPw which are useful numbers for zonal training.
It could be useful for synchronised swimmers – they get alarmingly low sats during activities while breath holding. A vibrating saturation alert could be useful. The question is does the sensor work when immersed?
Unfortunately not as the technology essentially “looks” at the pulsating colour difference between oxy-Hb and Hb (People look blue when hypoxic). Pulsation allows for the subtraction of tissue light absorption from the mix. Significantly increased CO2 levels would only produce a small effect indirectly through alterations in the affinity of O2 for Hb.
Now that is some info I can work with!! I’m in the market for a 5x or 5s/x + and wanted to know if it is helping me to have the oximeter. I do running up to 1/2marathons, cycling (mostly ATB), a little swimming, SUP’ing and hiking. Would it be better to go for the 5x or the 5s+? Noting that I already know the oximeter is not a feature I need. Thanks!!
So I know that the sapphire is more scratch resistant, but I’m hearing that the non-sapphire glass actually gives you a brighter and more contrasty display. Can anyone confirm or deny?
I am curious about much more scratch resistant it is. I have sapphire glass on my phone, and it is amazing and pristine after 18 months and many drops. I have a 2 month old Vivoactive 3 with regular glass and I have already scratched it. So I guess I am a good candidate for Sapphire glass. I wonder if the non-sapphire glass with a screen protector is less bright and contrasty?
It’s a big price jump for glass. But if someone has any info on the actual measurable difference in durability, I would love to hear it.
Hi Anthony. Sapphire is more reflective so makes the lowish contrast display harder to see. Unfortunately the non-sapphire comes with a shiny bezel which also seems to hinder. You could paint it? (-; I have an old F3 with dark bezel and plastic. Its good and there are no marks on the display after some pretty serious use. This plastic is tough! I have an F5+ but to get the black bezel I had to have sapphire which I now regret as my old F3 is much easier to see.
Great review. I noticed in the menu video that you had the F5+ that was all black wth silver accents. It’s available for ore-order on many sites but with no real ETA. Did Garmin advise to you at all when that model would be available approx?
Anybody looking at actually getting one of these should wait at least 6 months to see what kind of catastrophic defect has slipped through this time, especially at the insane prices Garmin is asking for them.
I agree with @JP. Maybe charging $800 for the watch is the only way for Garmin to collect “insurance” on products that could contain catastrophic bugs and have to be replaced by warranty 2, 3 or 4 times per customer. Also at some point Garmin will run out of people who haven’t been burned by the endless cycle of bad firmware updates introducing so many bugs.
I’m liking it so far. I needed a replacement for my Fenix3HR that I gave my son, and the 5X+ is the same size, and the black band is more comfortable than the one on the 3HR. Everything I am using so far is working well (HR, PulseOx, power meter, elevation when biking, etc.). Haven’t done any hiking or climbing with it yet, but I will use it as a second device when I ride the Mt. Evans Hill Climb in a couple weeks (using my Edge 1030 as the primary). I am sure there will be some bugs, but I expect they will be corrected.
Mark
I have the 5X (stainless w/metal band $800) and the 5+ ($1100 titanium). After using apple watches for awhile gotta say these are way overpriced for their build quality and functionality. Both of my watches are brand new but so very glitchy. The new plus model added music and Garmin Pay. Music works if you don’t use any other function at the same time because it will skip and glitch and fast forward and is useless (great if you don’t exercise while listening). I haven’t gotten Garmin Pay to work at all after trying 3 credit cards on their “compatible” list. Yup $1900 well spent. Will try to get a refund and keep searching for a rugged fitness watch that actually works as advertised.
Hi. Have you contacted Garmin support? They are surprisingly helpful lately. Two in three seem to have correct information. (I have been working with them on my Vivoactive3 issues.)
They can trouble shoot whether you have a software corruption or bad hardware. They will replace units that aren’t working properly. And they are actively correcting software bugs. Not always quickly.
Still underwhelmed by my Fenix 5 plus. I have enabled Galileo on run and walk profiles but the GPS performance seems as mediocre as on the Fenix 3. Galileo has not sorted out the issues stemming from poor GPS antenna design in both units. My Polar M430 is miles better. It is around 1/5th the price! I feel cheated. The attached is are tracks from both units. The top is the Fenix 5 plus with Galileo, 1s sampling and recording. The bottom my M430. The track from the latter is spot on correctly showing the side of the road I walked on and points where I had to pull in to let cars by. The Garmin wanders across the road to the wrong side like a drunken man and does not show the track details. It is not possible to export the Garmin track as a gpx and compare in Google Earth. You are also unable to view the track in full screen and the level of zoom is limited. I suspect this is all to conceal the mediocre GPS performance. Some folk might say this is acceptable. At this price I do not think so!
To export a GPX track, on Garmin Connect simply click the little settings widget in upper right corner of activity.
Also, Garmin Connect actually reduces the plot-rate for data points (which I think is stupid because it hurts them in situations like this – rather than helps them).
Thanks Ray. I didn’t even spot that little widget! (60 yr presbyope). Here are overlayed tracks on Google Earth. The Cyan is the F5+, the Magenta the M430. I don’t think plotting more data points would actually do Garmin any favours!
And last one showing me walking on the right side of the road (in UK facing oncoming traffic as per our traffic laws) and a couple of places where I had to pull in and wait for an oncoming vehicle (narrow road). The M430 seems extraordinarily good and is well within the GPS standard. I would question whether the F5+ complies?
Hi Greg. Yes. It is off by default. I turned it on because of poor tracks. On my F3 I would have GPS + Glonas + 1s sampling + 1s recording as only then would the track be acceptable to me. I think DC recommends this. There is a hit on battery life but its OK on the F3. I thought the F5+ would have this sorted with Galileo. It seems no better than the F3 and you chomp through battery (I did a 50 minute walk and used around 25%). I can see an analogy between Garmin and VW. Garmin is able to meet performance (cf emission) targets individually but fails in typical use. Battery life with ultratrac. GPS performance (sort of) with GPS plus X + 1s. I think it is a bit of a con.
Yeah, I prefer GLONASS, but in some cases some folks just have more issues with GLONASS than not. When I’m seeing something odd in a certain area I usually try one of the other GPS modes.
Andrew you had different experience than DCR. DCR found that the new gps chipset in the Fenix 5 plus was better than the gps chipset in the Fenix 5 normal, maybe for Galileo or maybe for the chipset itself.
About Galileo, another user, Dom, explained in another thread that we don’t have to wait massive improvement now in open sky because the Fenix 5 normal and Fenix 5 plus have a single frequency chipset, they just use the E1 frequency in Galileo and the L1 frequency in GPS. We should expect that accuracy of Galileo single frequency is about the same of GPS single frequency.
Dom explained that we could see some improvement now in narrow view sky, for example between buildings, because of the greater number of satellites and the better geometry of satellites. If you have time, you could analyze the performance of the Fenix between building and see if there is an improvement using Galileo.
Hopefully we will see a massive improvement in GNSS accuracy using dual frequency Galileo (frequency E1 and frequency E5a). Maybe the Fenix 6 will have a dual frequency chipset in 2019 or 2020, but this is up to Garmin. If a lot of users complain with Garmin about gps accuracy, there are good chances that Garmin will produce in the future a dual frequency sport watch (if it is practically possible, in another words if Garmin can produce a dual frequency antenna that fits the small dimension of the watches and if the power consumption becomes not higher).
Hi Mirko. The accuracy of bog standard single frequency GPS is in my opinion good enough for navigation if implemented well. The Ambits, FR205, FR910 and V800 demonstrate this nicely. The FR205 was my first GPS watch and I successfully navigated downloaded routes by following the Pirates o’ the Caribbean style arrow. For instant pace a foot pod is a more practical solution.
It is interesting to read the blurb from the Garmin website link to buy.garmin.com where it says “…The Forerunner 205 sports a unique design that wraps the GPS antenna around part of the wrist for a better view of the sky, and its high sensitivity GPS receiver provides highly accurate speed and distance data, as well as improved tracking under trees and near tall buildings…”.
Where has the antenna gone in new GPS watches? Dual frequency seems like overkill. Just get back to basics and do the simple things well.
Funny, from your words it seems that while every other component in Garmin watches improved, GPS accuracy actually decreased with the new models. Sometimes I think the same. I have an old Forerunner FR610 of 2011 and sometimes it seems to me that gps accuracy is better than the recent Forerunner FR35 of 2016.
I think that the big difference is that the old FR610 doesn’t have an accelerometer inside and gps tracking relies only on gps data.
In the FR35 I notice that the watch uses also accelerometer data for computing distance and tracking routes and not only gps data. This algorithm sometimes helps, but sometimes gives worse result than gps alone.
Both the watch at the end are very similar, but sometimes both have big errors (due to building or mountain) in different moments. It would be nice if it would be possible to avoid these big errors. I notice this because for the most part of the run the watches give the same time for km, and beep at the end of the km about in the same moment, but in a few km the difference between the two watches becomes 10 or 15 seconds in a km. With gps watches I would be happy if big errors become less and less. Difference in time of 2 or 3 seconds every km is acceptable for me. I think that big errors depend on mountains, building, and sometimes perhaps gps watches have their bad day like we human being.
Thanks for a great review – as always!
The Clever Training discount code for the UK site doesn’t seem to work, I’m not sure if there’s a typo in your text or if the codes hasn’t been activated yet.
The other DCR discount code (DCR10BTF) works fine on the clever training UK site. But after waiting a week with no replies to my emails to their support team, I cancelled my order and went with a local retailer (LBS), for slightly more money, but fat better responsiveness and support should anything go wrong.
Sorry to hear that. I checked with the CT UK folks (as I always do when folks say they have issues) and they noted that in your case they checked and it looks like they were on top of things pretty quickly (far less than a week) based on the dates they sent and when you e-mailed and ultimately cancelled the order.
If anyone is having problems accessing the storage on the F5+ on a Mac (it doesn’t register as a removable device) I have found a workaround. If you set the USB to media transfer mode it seems to use an android file transfer protocol. If you install Android File Transfer app you will be able to access the drive and its directories (I found this a useful workaround for sideloading apps under development for testing).
P.S. I note that the Amazfit Stratos is also an Android Wear device under the hood but has OKish (several days) battery life, presumably because of its transflective display.
I wonder how much power is used by the OS and how much by the display in Android Wear devices? The M600 had great potential but was flawed by battery life, I presume in part because of Its LCD display. A modified Android Wear OS with reduced power consumption combined with a transflective display could provide a great base for a sports watch.
I wonder what Polar are doing with the V800 successor? (-;
OK. I got fed up with the F5+ and used my F3 (with Stryd for power) and my Polar M430 for phased interval training. My intervals involve running up and down the same flat route which is ideal for looking at GPS consistency. I have overlaid the F3 track (GPS+Glonas, 1s, 1s) with that from the M430. I think the eye can pretty much do the stats on this. F3 in cyan, the 430 in magenta.
Constant issues with pairing headphones. Have to un-pair and repair all the time to get them connected. Also get error messages trying to download music. Not to mention other bugs and GPS issues. $850, really Garmin. Give me a freakin break.
I have the 5X Plus and am having a problem with navigation. The last series (5X and Tactix Charlie) allowed the user to upload selected Open Street Maps via Garmin Map Manager and Garmin Map Install. You could plan routes in Basecamp and then send them to the device (or download device generated routes–tracks–back to Basecamp). Not only does the 5X Plus NOT appear as a “drive” or device in the Mac finder, but it is also not compatible (apparently) with Basecamp. Furthermore, although Map Install shows it successfully transmitted the OSM topo map to the watch, that map does not show up under any of the “Configure Maps” in the various activities. Has Garmin actually shut the new devices off from both Basecamp AND Open Street Maps? If so, that is a big loss in utility in terms of planning trips (in my case, hikes or dirt bike routes).
Hi Ben. See my post #603 for a work around. If you select USB mode MTP and install Android File Transfer (you may have to install Android Studio to get this) you will have access to the drive directories in the app. You can then paste a new gpx route into the directory garmin/newfiles and it will convert to ant and load into routes on the device.
Hi Ben. I think thats the issue. I use a Mac too. Garmin has gone Android. Macs don’t recognise Android devices as removable storage *natively* (which is odd as OSX and Android are Linux like) whereas I believe Windows does. You need to install the Android File Transfer app and launch it to gain access (after ensuring that Garmin Express in not running). I do not believe Garmin will be able to help you without a firmware rewrite!
I found this on the Garmin support website under fenix 5X Plus, selecting “OTHER” for topic and MAC as the keyword.
“My Mac Does Not Recognize fenix 5 Plus When Connected via USB”
“Unlike previous generation fenix devices, the fenix 5S Plus, fenix 5 Plus and fenix 5X Plus use the MTP (Media Transfer Protocol) mode when connecting to a computer. This USB mode allows for the transfer of media files to the watch. Mac operating systems (OS X, macOS Sierra, and macOS High Sierra) only provide limited native support for MTP devices, which means these watches will not be recognized as external drives. For additional assistance on transferring music and other audio content to your watch, please see related content.”
You have to make sure Garmin Express does not launch automatically when you connect the watch. Disable in its settings. If it has connected, even once, if you then close down Garmin Express, the USB connection is permanently denied to Android. You then have to unplug and plug back in. (and Garmin Express needs not to start again or you are back to square one). Good design hey?
Just been for a forest hike with my F5+ and M430. F5+ 1s samp and rec, no Glonas or Galileo. 3.72 miles recorded on the M430. 3.89 on the F5+. 3.71 miles shown on identical route drawn in Garmin Connect. Although the GPS track is generally OKish on the F5+ (ignoring the fact that the data is seriously reduced before storing in Garmin Connect therefore jerky straight lines) there are occasional blips where it creates bizarre loops (at least three on this route) see examples below. This must have added distance to the route. Is anyone else seeing such odd behaviour?
This is my personal opinion. I think that the algorithm of the Garmin watch introduce voluntarily these loops, when the gps data show a distance and the internal accelerometer gives another distance. When the algorithm believes that the distance of the accelerometer is more correct of the distance of the gps data (in other words when the algorithm thinks that the data of gps are not so correct) it modifies a little bit the track with a loop, so the distance becomes a little bigger. When you export the data in garmin correct or in other programs, the track seems a little weird but in this way the garmin watch gives the distance that it thinks is the more correct examining the gps data and the data of the internal accelerometer. This is just my opinion and maybe I’m wrong. I think this because my old Garmin FR610 didn’t have an accelerometer and it never gave me this loops in the track. My newer Garmin FR35 has an internal accelerometer and sometimes it gives me the loops in the tracks. When I do long runs I usually trust more for distance and pace the FR35 than the FR610, because usually the FR610 is quite accurate, but in some difficult points where gps reception is bad it gives big errors. The FR35 gives not so big errors and not because the gps receiver is better, but because when gps data have big errors the accelerometer can help recovering the correct distance. I repeat this is just my opinion and I may be wrong.
Whatever the reason, the GPS performance is simply not good enough. The M430 has only average GPS performance but seems much better than both my Fenix 5 plus and the older Fenix 3. I am after all not comparing it to my Suunto A3 peak or Polar V800. I expected so much more in a watch at this price point. I bought into the Galileo hype but have now got just another crappy Fenix GPS. I have just emailed Garmin support asking them to provide a solution, replace or refund. I await the response. It is surprising that my experience is so dissimilar to DC’s. It begs the question was his, or is mine, representative?
Did a test yesterday, GPS, GPS + Glonass, and GPS + Galileo. Got the best results from GPS + Galileo, however not that great or consistent. I am very disappointed in this watch (fenix 5X Plus). I also noticed the sleep tracking to be off. Also bluetooth connectivity issues, drops connection from phone. Once I turn off headphones, the only way to reconnect them is to remove and repair them. Then they crippled it on the Mac. Can’t believe how poorly it performs given the extremely high price.I bought mine from Clevertraining.com. They have a 60 day satisfaction guarantee. I may return it and go back to my fenix 3HR. Just sent a second email to Garmin. They seemed to either have ignored the first one I sent almost a week ago, or are inundated with complaints. I’m guessing they made sure the test watch they sent DCR was vetted for bugs before they sent it to him because consumers are not having the same experience. Very disappointed with Garmin. What are they thinking.
Andrew, that’s disappointing, but not surprising. I had many issues with my f5, so like many others, I went to the 935 and haven’t looked back. I’ve been waiting to see if the plus solves the gos issues, but based on the forums so far, it’s mixed at best. Have you tried the 935 compared to the others you mention above?
And DC, have you officially moved onto the plus as your everyday watch vs the 935.
Here is a better view of the tracks from my M430 and F5+ on a recent hike. F5+ in magenta, M430 in cyan as usual. I did not realise Garmin pruned the data so much when exporting to KML. Better to export as GPS then import into Google Earth. The problem is not so much positional accuracy in the F5+ as positional inconsistency and loops introducing extra distance. To me this suggests an algorithmic problem or bug rather than a pure hardware issue. Mirko alluded to this. This device is not of merchantable quality as it stands. Not sure how DC got so badly burned with this one?
If you see the run of Ray in the French Alps in Chamonix (I attach a screenshot of DCRAnalyzer) you can see in some points some loops. The loops of the run of Ray are indeed small and not worth of notice (the map where I took the screenshot has a scale of 5 meter, as you can see in the ruler). In your screenshots, Andrew, I can’t see a ruler so I don’t know what is the scale of the map. But it seems to me that your loops are a lot bigger than the loops of Ray, so they seem to be big errors of GPS (the big errors that I wish that a dual frequency Galileo watch could avoid, me too from time to time suffer with my Garmin watches of big gps errors).
It seems to me that till now in this comments 50% of users noticed an improvement of Fenix5 plus gnss tracking in comparison with Fenix 5 normal, 50% think that there are no improvement.
Hi Eugene
Thanks for the advice but I am no longer interested in owning any new Garmin products. I certainly don’t want to boost their profits by buying a device because another of their devices doesn’t work properly. Bitten twice forever shy!
Waiting for the V800 successor in the Fall.
I’ve moved onto the 5+ as my day to day watch (the 5+, not the 5S+ or 5X+).
One minor thing to note is that when looking at my Chamonix files, be sure you’re looking at the notes on which devices were worn on the wrist versus the backpack (given I had a pile of them, they all couldn’t fit on my wrist). In those cases, Day 1 of the Chamonix stuff was Fenix 5X+ on my wrist, other units on backpack. Whereas Day 2 was Fenix 5X+ on wrist for way up, and I believe on way down it was 5S+ on wrist and rest on backpack (can dig up my notes).
As Mirko noted though, whatever loops are on that one route are barely visible and not seen on most other routes
Finally, I’d be super careful when looking at another than the original .FIT file (which is how I compare). Anything else might be funky/non-representative. Especially because Garmin sends the original .FIT file to 3rd party platforms for sync.
Either way Andrew – not sure why you’re seeing what you’re seeing. :-/
How is this for scale. I switched on Glonas but it didn’t help. On this long run I passed a rock, went back, sat on it, got rid of a stone from my shoe, then carried on. The F5+ freaked out. This is not a GPS issue. This is algorithmic / a bug. They need to stop trying to do clever stuff with accelerometers as they clearly don’t have the expertise. I also wonder if the data points are correctly time stamped. Do they fully understand the characteristics of the GPS chipset they are currently using?
Because I haven’t quite followed this entire thing – have you tried contacting support about getting a unit swapped out? Perhaps there’s just something mechanically wrong with yours. Obviously simply sitting somewhere for a few seconds shouldn’t show that.
Hi Ray, My comment is near the top of this chain. I did see that Garmin introduced an update to Map Install 2 days ago. I was finally able to install OSM on the 5X Plus (although, unlike 5X and Tactix Charlie, the OSM map does not show up on the list under Configure Maps-even though I think it is actually there). I’ve had similar issues as others have regarding music dropping out after 20-30 minutes (have to reconnect with the headphones; or even delete and re-pair with them) and sometimes erratic GPS maps–looks similar to what the InReach does, drawing straight lines at odd angles. The music thing and the GPS thing are minor, I think, and likely to improve, but the disabling of the Basecamp connection for Macs IS a big deal to me. That’s one way (in addition to My Google Maps and a file translator) I used to plan my routes. It’s even more frustrating to me because I briefly had the Tactix Charlie which DID allow me to upload routes from my Mac to the watch. I hope to speak with Garmin customer service when they open this Monday. By the way, my MacBook Pro does not let me click on the subscription or support DCR or Notify Me boxes I’m running the latest OS High Sierra).
That doesn’t look like anything clever to do with accelerometers. That just looks like random walk. Since so far as I know Garmin doesn’t take any preventative measures with their watches (they do with the Edge), you’re just seeing GPS noise. I don’t know how wide that lane is (here in the US, lane width is typically 8 ft/ 2.5 m) but GPS error is typically 2 – 3 m. So it all looks reasonable. If they were doing something clever with accelerometers, it probably wouldn’t show that track.
If you want to verify, take your watch outside, put it down somewhere, and start recording an activity. You’ll see a track similar to what you see when you stopped this time. There are lots of threads on the Garmin forums discussing this and seeing who got the greatest recorded distance when the watch was sitting still.
Ben, are you using an ad blocker? Problems like that with Safari can be caused by third party software interfering with Safari. Turn your ad blocker off for this site.
Someone suggested better to export as FIT because the GPX export is not as reliable. I did and overlaid on top of the GPX export from Connect IQ. See below. One is half the render width of the other. The tramline appearance of a narrow track on a broader track show that the data points are (to all intents and purposes) identical. The GPS performance (with Glonass) is unequivocally crap just as it was with just GPS or GPS+Galileo.
I hope you are right and this is a problem with my device. Some of the other comments on here however suggest this is not an isolated problem.
P.S. Apologies. Google Earth is buggy too hence the alpha value is clearly less than 1 despite me setting it to one for each track so it looks a little washed out.
Maybe so but what a dumb algorithm. If so the resulting distance measured is so way out and not acceptable. The M430 doesn’t seem to suffer the same issue (even though it is not an exemplar of GPS excellence). It would be pretty easy to model a runner as a physical system, constrained by real world maximum acceleration and velocity (best sprinter) and apply a “force” to it related to the distance to the next measured GPS location. Add critical damping in to the model and you have a decent filter that would overcome the GPS random walk issue (as many of the random position variations are physically impossible for a human physical system). Perhaps that is what Polar do as although they do not seem to have significantly greater positional accuracy but their track is not as bonkers as Garmin’s and the distance measurement more reliable. Although Garmin has a larger number of programmers than other companies I do question how competent they are. Great software often results from small teams of highly committed and skilful programmers supported by IT savvy management.
I am seeing quite the same behaviour. I was totally unacceptable during my first test when walking slowly with my daughter. I don’t have the map, I hated it so much I have deleted the activity :-). It was better on my second and third test when on boat or bike, but only when there is perfect view of the sky. Once there are buildings (not very tall), or bridge above, it goes crazy. But I have checked a couple of older rides with 5 (original) and 3 (no HR) it seems quite the same. Here are few examples I quickly did for you and others.
There are some more issues I have experienced so far with 5plus, during my first few days of testing & playing with it:
1) Battery life is far worse than 5 (original). Many people share the issue: link to forums.garmin.com
2) Connection with phone drops from time to time, and you have to restart watch or phone (iOS) or both to reconnect.
3) Notifications from phone (iOS) only sometime get to watch. But I may have seen the same issue with my Fenix 3 and 5 (original). Not sure – I stopped to care after a while.
4) Various issues with Navigating on watch. For example it gets stuck on “Calculating…” sometime, and when you try to cancel by “Stop Navigation” and go to another app even without trying to navigate again, the “Calculating…” message is still there. Or it restarts itself when trying to calculate route.
5) Garmin connect on iOS has ghost menu items to manage apps. It has “Activities & Apps”, “Activities, Apps & More” and “Appearance” all allowing to install some combination of Apps, Widgets, Data Fields and Watchfaces :-). Fenix 3 and 5 had more polished management screen.
Honestly I think these are all issues which will be eventually resolved by software updates. If so, the only one thing makes this watch far worse than Fenix 3 or 5 is that the edges around screws are sharp(er). It means cuddling with the watch is not that pleasant, and drying it with towel after washing feels just bad :-D.
My partner now tells me I had a temporal lobe seizure. Ran along the wall, jumped off and started break dancing before carrying on down the road. I have sent the watch back as I don’t want this to happen again. (-;
Ah, but does Garmin use accelerometers or a filtering algorithm to improve the track when moving to overcome their patented but poor exo antenna design? If not it is hard to explain the reduced size of the random walk when moving.
“…So it all looks reasonable…”. I disagree that this is reasonable.
I sat on one of the rocks visible at the lower left corner of the image. A standard car width in the UK is 1.8m. There is a van in the image, so probably around 2m in width. You can see the spread of values which vertically exceed 10m, so not meeting the minimum GPS standard when stationary. The conditions were not particularly challenging – a coastal run – flat.
Such a gross random walk at low speed or when stationary wrecks the accuracy of the distance measurement. I believe it reveals the underlying poor GPS performance. GPS was an issue in the F3. I am amazed that Garmin have not responded to these criticisms. Quite the contrary. The F5+ is worse!
I read all of your posts and they confirmed my strategy. One can wear a member of Fenix family and use it, but he needs also a non-smart Garmin with better GPS accuracy and can merge the data afterwards.
Andrew, you’re sitting with the watch where? Next to your body? You know that your body can attenuate GPS signals just like trees/leaves/buildings/etc. can? As for when you start moving again, you’ve removed the mean motion so you can look at the GPS residuals farther up the track? Or are you just basing your judgement on the fact that it “looks” straight? And there is no “minimum GPS standard”; 2-3 meters is about the best it gets with consumer GPS. It can be much worse.
Garmin doesn’t seem to use the accelerometer at all in determining the track. (Or else why would the let it random walk when you’re stopped, which is pretty silly?) The only thing I know that they use it for is “dead reckoning” when the GPS signal is lost, like in a tunnel. (And I suspect that it’d be easy to fool it then.) Other that tunnels I’ve never seen any evidence that Garmin uses the accelerometer for anything other than things like “step counting”. If you’ve ever used a Garmin device that records accelerometer output, like the VIRBs, and looked at the record you’d see the reason why. There’s plenty of noise in the accelerometer signal.
You are looking at one post in isolation. Look at the others which show the same problem. My watch was worn on the left wrist. My body is always in the way of some part of the sky. To suggest that in all these cases it is because my body is in the way of a satellite (presumably where only three were initially visible) is I think absurd.
You are wrong that there is not a standard. Domestic GPS should locate to within 10m to meet the minimum standard. link to gps.gov
As to your last point. I agree it would be pretty silly to stop using accelerometer data when stationary. Unfortunately this appears to be the case. Perhaps there is an issue with the algorithm so that it ignores (Ax, Ay, Az) values if (0,0,0) which of course is daft. I have known programmers do more foolish things (just look at the A400M). Of course this is mere speculation.
The bottom line is that the GPS performance is not good enough.
Injured and doing a lot of pool running right now. Thought I could wear headphones and listen to some music. Once the watch goes underwater it cuts off. To be expected when I think about it, just thought I’d let other injured runners know!
Thanks for all your great reviews! One question on the Fenix 5 Plus. I see that it has bluetooth connectivity. Will the HR monitor on the watch communicate to my Wahoo Element Bolt bike unit so I can see the HR right on the Wahoo Bolt? My Mio Alpha 2 works that way, but I wasn’t sure if the communication on the Fenix Plus would work with the Wahoo Element Bolt in the same fashion.
You might be able to if you were to swim one handed keeping the watch close (a few cm only) to the receiver on your waterproof BT earbuds (which I doubt exist for obvious reasons). You can get combined waterproof earbuds with an MP3 player for around £10 on Amazon.
I am looking for a watch to replace my old running watch (tomtom spark) and my garmin edge 1000.
It must be my every day watch.
Do you advice a 5 plus (not x) or a 5x (not plus).
They both have navigation and maps.
Keep your Edge and get an old Fenix 3 without optical HR (as it sucks) and without sapphire (as it sucks). It looks quite nice with a dark grey bezel and customisable faces as a dress watch. The Fenix 3 has mediocre GPS performance but accuracy is just about acceptable with Glonass. The 5 and 5 plus are are worse. The 5 has sensor connection issues. They both have poor GPS antenna design and are confused in anything other than ideal GPS reception conditions. Firmware updates are not going to sort these problems out! Have a look at the forums.
1) Broadcasting while not in an activity (don’t recommend)
2) Broadcasting in an activity (recommend)
I prefer the second because the first totally blocks your screen in that mode. Whereas the second just broadcasts while recording an activity (which you can then discard if you really want).
To enable:
1) Hold middle button to menu, then settings
2) Sensors & Accessories
3) Wrist Heart Rate
4) Broadcast During Activity = On (lowest option)
(Alternatively, you can do the other method in that same menu, which is to just ‘Broadcast heart rate’ right now…but as noted, that blocks the screen. There’s also faster ways to get to that option too.)
Then on your Edge 1030, simply search for a new heart rate sensor. Remember to have started an activity though on your Fenix 5+ when you search for pairing, else it won’t show up yet.
Finally, keep in mind that in general I don’t get great results from cycling with the Fenix 5+ (or any Garmin watch). I find it works best in steady-state riding (like triathlon training), but less awesome for sprints/city riding/etc….
Update regarding Mac users: The MTP issue has apparently been resolved, as far as route planning with Basecamp is concerned. Both Map Install and Basecamp have been updated. Basecamp (ver. 4.7.0) DOES now “see” the Fenix 5X Plus, and is able to send and receive data.
Maybe so but you are then restricted to the archaic turd of a program Basecamp (and you have to pay for maps that are free anywhere else!). My workaround allows Mac users to upload their GPX files created using whatever they like. I tend to use Movescount because it has proper heatmaps (C.F. popularity routing which seems broken in the UK). Also anyone developing for Connect IQ on a map will need to have access to the removable storage to “sideload” apps for testing on a device. This unadvertised change by Garmin is quite rude to Mac users.
I have sent my F5+ back as for me it has no significant advantage over my old F3. It feels good to have offloaded the thing.
I don’t care for titanium band is the extra money worth it for a titanium bezel only? Or is the titanium band far better than the other bands. I’m deciding if i want to upgrade from my 5x to the plus or not…
I have to say, after a few weeks of running with the 5X plus – I am completely nonplussed with the GPS performance
I expect any GPS to have trouble in the canyons of the big city, but the 5X plus has the absolute worst track of any watch I’ve had in the last few years in downtown Chicago
Beyond that, along the lakefront, which is basically open and flat, the last 2 runs have shown me skipping off into the lake
It should be a simple programming exercise to avoid non humanly possible tracks based on speed or walking across open water
Funny thing is, it was ok and slightly better than the 5X on the first run when I tested them head to head – before the first Garmin software update
not yet – I can try that but it’s kind of ridiculous – on the software side, using Galileo or Glonass in addition to GPS should only improve the track, never make it worse, the API usually has a confidence measure of each data point, if either Galileo or Glonass decreases accuracy – why is it there in the first place ?
No.
Oxygen saturation is not related to how much Hemoglobin you have. You can have 97% SpO2 of 14 g/dl or 97% of 8,0 g/dl Haemoglobin. It is the SATURATION of the hemoblobin you have. For the amount you have to perform a cell blood count. I’m sorry!
Alessandro
M.D.
I’m a marathoner and train daily, 70-90 miles a week most weeks and I also like reviewing my runs in connect.
DC – is there much value in upgrading from a 945M to a Fenix Plus 5? Other than casual bike rides with the kids, I’m using for running only. My 645M arrives from Garmin this week. Wondering if I should spend the extra to trade up.
I don’t need maps, but Galileo accuracy sounds great and I’m wondering if the 645 screen might be too small for my 50 year old eyes vs my failing 630 with a perfect size screen for me.
Hi Ken – Personally, if you’re using just the FR645M for running, and are good with the physical aspects of it (appearance/weight/etc…), then I’d probably stick with it. Also, the FR645M is set to get Galileo as well via software.
Ken – The one downside to the 645M is the battery life, especially compared to something like the 935. I’m running 50-60 miles/week currently and am charging it every few days. I tend to put it on the charger when I shower just to keep it topped off.
Thanks guys. I opted for the Fenix but appreciate the advice. I reviewed Ray’s reviews extensively and I think given my heavy use, the longer battery life of the Fenix plus will be a nice benefit. In addition, I plan to use with my Jabra 65T elite headphones. They are the best running headphones I’ve ever owned (and I’ve owned many), but the receiver is on the right ear and I wear my watch on the left. Ray speaks to the improvements in the Fenix for Bluetooth connections, and in Garmin forums it looks like my Jabras do OK with the Fenix, but struggle with the 645M. Like many, I’m a little disappointed with the price premium for the Fenix and I suspect Garmin will need to address that in the medium term, but nothing I can do about that at the moment! In Canada they even charge a $150 premium for the sapphire version (which I’m going to select), as I’ve scratched up my 620 and 630 in the past and was always put off by the little nicks – but $150 for that is a pure profit grab. Ah well – no one ‘needs’ a Fenix, and as Ray alluded there are other very good choices out there at much fairer prices.
Thanks again for the feedback, and Ray – keep up the awesome work!
I bought a Fenisx 5X Plus relying on Ray tests, but we must not have the same watch. GPS accurracy is horrible !!!, not usable even !! OX sensor is giving me results below 80%.
I am trusting your reviews from a long time but I can’t understand how while using this watch for 2 months you didn’t detect all these issues related in all these posts…
I should have been waiting more time to have reliable feedbacks from different users.
Thanks Andrew for confirming me that I am not crazy. I wrote emails to Garmin, for them everything is ok…
I spent 849 Euros for a piece of shit and I will not be able to be refunded…
My trace with 5X plus, with Ambit 2 it is perfect.
When viewing satellite images of tracks, you should always view top-down, as viewing from an angle will skew things. Also – do you have an example of that same track with the Ambit2? That seems like quite a few high-rise buildings around it. May be worthwhile to try the various GPS modes (GPS-only, GPS+Glonass, GPS+Galileo)
Finally – what retailer doesn’t let you return a watch within 30 days? The watch has only been announced 37 days, and given you just posted I presume you just got it (and didn’t wait 31 days to post).
Yes, here is my trace with Ambit 2 (bought in 2013).
I bought my Fenix 5Xplus 10 days ago but when I called they said they will change it but I didin’t ask for being refunded. I can’t imagine the vendor will accept or maybe he will give me a coupon but not a refund. I will try.
I don’t understandhow the y can release a so bad watch whereas the Fenix 5X looks pretty accurate.
That’s an impressive track for any GPS, about as good as I’ve ever seen on a track by any unit on the market, even ignoring all the buildings around it.
As for a refund, I’m not aware of any retailer in any county in Europe or North America that won’t issue a refund under 30 days for pretty much any reason you want. Perhaps in some regions outside of that, but 30-day return policies are the norm.
My retailer is Lepape in Paris, when I brought my watch they refused to refund me. They gave me a coupon since the watch was not available and they told me 2 weeks ago that they will provide me a new one at the end of august. I bouhgt it on July 12nd, I sent it back 10 days later and I have no watch and they don’t want to refund me. :(
Heads up. Just purchased (25 July 2018) Fenix 5X Plus Titanium DLC with Titanium band for a little over $400 off regular price. Not sure what’s going on or if it’s an error. They also had deals for Fenix 5 plus and leather bands.
Discount on the Leather band is only given when ordering with a watch.
I placed the watch order and then went back to order a leather band, but it has no discount :-(
If anyone orders a watch, please throw in a Black Perforated Leather band..
Got an email from them. They cancelled my order. Tried to blame it on the fact that I placed my order while I was away for business meaning my order was made from a place other than my shipping address. Spoke to customer service and they were able to place the order again for me for the advertised price. I’m guessing it was a fluke since the prices are now back thru the roof and customer support wasn’t tracking any sale going on.
Has anyone encountered problems with Basecamp and the 5X Plus on a Mac that only has a USB-C port. Garmin Express works fine, but Basecamp rarely if ever recognises the watch, hence route planning impossible. Any solutions appreciated! Thanks
Got note we need to contact Spotify to get it on Garmin. You can vote on this by logging into Spotify. I just did and can recommend anyone to do so to get heard by Spotify.
Second, do you know if Maestro will be connected to Garmin also for payments? Especially in Europe and in NL, where I live we use, opposite to US, mainly direct debit cards in stead of credit cards. Payning contactless by phone or ring is already possible here, so why not by watch?
I have a fenix 5 plus and love it. However the Volume in music-playback is waaaaay too low for me. Is there any possibility to boost the maximum volume on the fenix?
–> more information:
I normalize all my mp3-files to 92dB using MP3Gain in order to avoid any clipping. I’ve been plagued by the eu-volume-limitation since my first iPod but I could change the firmware on the iPod to get normal volume.
Now I’m using the Sony SBH54 Bluetooth headset & my android-phone with ‘poweramp’-player, where I can boost the volume. When running I use the Sony SBH54 with Koss porta Pros andy simply can’t enjoy the music as it is too silent. So:
1. Is there a (eu-) volume limit on the european fenix 5 plus models?
2. Is there any possibility to increase the maximum volume level on the fenix 5 plus?
That nasty clipping issue had been a huge problem for me, because the majority of music is mastered to the limit, due to an idiotic “loudness-madness” started by Dr. Dre in the 90’s.
The problem is the fact that volume-limits (eu-limitation) are no referenced to a normalized signal, but the overboosted music.. Therefore my files are clipping-free but simply not loud enough.
Any chance to adress Garmin with hat issue? That would be super-awesome!
Hi,
In this link a show you a quick test about GPS, GLONASS and GALILEO with the beta 3.53 of Fenix 5 Plus, the purple one is the real track i walked, is this a normal deviation? i waited 30secs for GPS fix, clear sky and bordering the river almost all the time.
This is not acceptable in my opinion,
I have had poor GPS accuracy with my 5X Plus
none of my previous Garmin watches performed so poorly
Each generation of watch should only improve on the last one
I don’t know what the issue is, sketchy software, bad antenna, immature hardware – doesn’t matter, the performance of a watch at this price level should be better
I have seen worse (see my F5+ results in my earlier posts). You have several 6 story buildings in this location and I bet they are of steel reinforced concrete construction. Maybe the one with Taxis Alustiza blocked out a critical view of the sky creating the bigger error just before the 90 degree turn at the top middle of your image.
I am so glad i read thru all posts and found out “i am not alone”!
I’ve had 2 diffrent Fenix 5 Plus, first an Titanium model and an regular model, both with totally useless satellite reception.
I’ve had several Garmin GPS watches thru the years, probably ~8 diffrent models and they worked completely satisfying, lastly an FR935 and i felt completely confident to buy an F5+, what could go wrong? Both DCR and several other reviewers had posted it worked flawless, so i cashed $1000 for one.
When i found the satellite reception to be an joke i thought “it’s something wrong with my watch” so i sent all info to Swedish Garmin Support including link to my Garmin Connect, which settings i tested a.s.o. they answered with instructions on how to upgrade the firmware and reset to default settings, i gave up that route, i returned my watch and ordered another one, it was as useless as the first one, i made another try with Garmin Support, wrote an very comprehensive descriptions of my problems, including all things i had tried, and that this is the second watch i have trouble with, they answered with 1. Upgrade to latest firmware. 2. Reset the watch. I then got a bit upset and asked if they read what i had written, and that other watches have no problem to track 100% error free the same tracks i have run. Garmin support answered that it’s nothing wrong with my watch, “it’s how GPS work”. I immidiatelly returned my F5+ and i have decided to keep my FR935 “indefinitely”.
Of course, even tried latest beta firmware @ the time which was “fenix5Plus_356Beta”.
Did nothing for the accuracy.
Every time i contacted support they started with guide me how to update fw, how to change to GPS + Glonass, how to change data recording, despite i already have written that i have latest firmware, i tried latest beta, i tried GPS, GPS + Glonass and GPS + Galileo, i tried data recording Smart, i tried data recording every second a.s.o, and it gets a bit old to get those instructions when i already have written all settings i have tried and therefor must know how to change them.
Worse GPS i have ever owned, tried an old FR210 that been put away in a drawer for several years and that works.
I can’t for my life understand how it can loose satellites on top of a mountain with no trees in the way.
A friend that been training with me use an Fenix 5 and it never lost satellites, mine lost them almost every kilometer.
In a TrainingPeaks blog post about pulse oximeter use cases: link to bit.ly, I’m particularly interested in Perfusion Index that indicates blood flow strength, and its variability implies hydration changes. With LVL not going anywhere, I hope Garmin eventually adds PI and PIV support.
Hi DC you are amazing, thanks for all the great work you do.
I am *this* close to buying the Fenix 5 Plus. Can you help out with two questions please?
1) Can I build my own route at home on the interwebs, then up/download it to the Fenix 5 Plus?
2) Does the Fenix 5 Plus then tell me “turn right here, turn left there”, with a voice from the watch itself (in other words, I’d hear it without having headphones on)?
Chirps and beeps are actually fine, as long as there’s something to alert me to “stop running straight”!
I am going to ask a similar question on the 645 forum. Rapidly narrowing my choices down to either the 645 or the 5S Plus … much rather have the 645 as I’m just a runner, and don’t want to listen to music when I run.
Just shot over a note to find out when. It sounded like there was some specific 5X+ exclusives in the UK (meaning, certain retailers had exclusives). I should have an answer within a few hours.
Yeah, I checked again on Thursday – it’s still basically some variant of an exclusive with certain UK retailers (actually more specifically, certain UK types of retailers).
In general I find Garmin UK/Europe does super wonky things with how they try and differentiate their products to various retailers. No other sports tech company does it this way. Essentially Garmin attempts to limit certain products to retailers that ‘fit a certain profile’. For example the higher end Chronos watches were only available to specialty watch makers (but not fitness companies).
No company seems to go out of their way as much as Garmin (UK) to minimize product sales or make it challenging for their customers to buy their products. Shrug?
Nothing soon. I checked, and they’re basically still waiting on Garmin here on this one. They’d have it listed tomorrow if they could, but Garmin is restricting the 5X+ in UK/EU markets to specific specialty retailers.
Hello congratulations for what you do … do the reviews TOP … I follow you recently and sorry if I translate but do not speak English … I wanted to ask you since 10 August is my birthday and I was intensioned to buy the garmin fenix 5x plus … I wanted to know from you if it’s worth buying it. if it is precise as many people say or if it always has problems and maybe it is better to wait for 6? greetings alessio
As much as I like the Ambit3, I’ve got to a point where there is a huge benefit to having on device mapping, and a work project looks to use Connect IQ for some interesting things.
Does anyone know if I need to retire my Suunto HR straps? Or can they work with the Fenix 5+?
I have been using my Fenix 5 Plus Spark Orange for over a week, battery life works as per Garmin’s chart and GPS/Glonass has me within 4 feet of where I actually ran on the road. I am a very happy Garmin Fenix daddy. I added Garmin’s tide chart APP for fishing and it also works perfect.
Hi – Is anyone using the HRV feature on the Fenix 5S/5/5X Plus watches to tell them that they are overtrained and need to back off a bit (i.e., the HRV is flat)?
Or is the presented data simply not displayed in a way to be able to make conclusions like that?
(DCR, I saw you made a presentation recently about HRV!).
Fenix 5 HR plus Open Water GPS distance stops working.
Tried GPS normal swims and GPS Glosnas swims
Both stop after 50-60 meters for swims of approx 1-1.3 km
New product, on the cycle it’s accurate but not in pool swims nor in open water
I have the exact same issue with open water swims. Every single time. It’s completely broken. No help from Garmin support either – very disappointing… I regret upgrading from my 920xt
this is the Spotify new ideas page for any interested Fenix 5 plus users or running watches to flag up the idea to Spotify management in order to allow Garmin to link Garmin Music with Spotify as in the article.
a few more thousand supporting subscribers will help push this out for us all. link here and carry on the community pressure….
Mark link to community.spotify.com
Thanks for the awesome reviews! Something I’m unclear about though is the battery life. The Garmin site lists the GPS-on life of the Fenix 5+ as “Up to 18 hours”, but your review says it’s 32hr. Just want to make sure I have the right info before I decide what to buy.
Wow, I am very apprehensive about buying the 5S Plus, given the descriptions of horrible GPS performance (Andrew’s many posts, with maps; Jan Nilsson #704; and others).
I was going you wait about a week when I returned from traveling to order a Fenix 5S Plus, but now I’m not so sure. Before reading about all the GPS problems I chose it because of the size (vs. 935), for the maps (vs. 645), and for the Saphire (I break everything I touch).
Now I’m not so sure … should i buy something else instead?
OK, I’m thinking about it some more. Caution, heretical question approaching: “Really, how important are these GPS deviations of the sort described in the comments?”
What I mean is … sure the route maps aren’t as pretty, running through the River Thames or what not, but if I’m looking for GPS only to:
1) ** Reliably and accurately ** show me a distance so I can check my progress in terms of pace and other metrics, and
2) To run in new locations and not get lost,
Is the current state of the Fenix 5S Plus GPS, warts and all, good enough for those purposes?
Maybe the best thing for me to do is buy the watch, and take it out for a few runs along with my Android phone, and compare distances. I guess I can always return to Clever Training in the first 60 days if I’m not happy with the comparison …
1) No. You will have to buy a foot pod for that (preferably a Stryd).
2) Just. You will probably have to retrace a route or two if on the sort of detailed small tracks prevalent in UK woodland. The maps would stop you getting truly lost. If it is a large motorway of a trail in Yosemite it won’t matter.
It isn’t good enough to trail run a new route in demanding conditions without having to make frequent stops to work out where you are and what route to take. If you are just hiking then it is not quite so irritating.
Remember that Garmin’s auto-zoom is broken so you have to switch it off. The track may then just disappear off screen. If you manually pan and zoom to find it It stops centring and orientating the display.
The bottom line is you are going to have to walk and fiddle with the watch periodically. It is not fit for the continuous running of new trails in demanding conditions.
1) I was planning on buying the Stryd Live anyway, so that will work well.
2) It sounds like I run different sorts of routes than you do … I basically run streets, not really wooded trails or anything like that. So maybe I’ll have some better luck with the GPS.
I think I’ll be buying the Fenix 5S Plus in a week or so … comparing it with my Polar Beat and Polar H10 chest strap (and Stryd Live too) in terms of total distance run.
I’ll report back in a couple of weeks in terms of:
1) How far off the total distance run is (whether the maps are “pretty” or not), and
2) Using the wristwatch map to “figure out which street I need to turn left on”. I’m actually not able to focus on very much when I run, so I won’t be peering at my watch to see when to turn. I’ll see if I can have it “beep or chirp” at me when it’s time to turn, like Mr. DC Rainmaker said in a post higher up.
Thanks again.
Jan – do you have anything you want to add (I appreciate your post #704, above)?
1. On one of my F5+ worse days watch said i had run 8.8km, track it had recorded was 4.8km and real distance was 9.8km.
2. This was the reason i bought the watch in the first place, and only reason i miss it.
When running unfamiliar terrain i want to make an route beforehand, then i have an help which direction the heading is if i choose to run a diffrent path.
I used it during an trailrace i ran a couple.of years ago when using FR935, i had made an route on that also but missed an hidden turn, but since i had the route in the watch i noticed it after a while, in the F5+ it was much much easier to se exactly where to turn, i ran past the turn but since i missed it before i was awake and looked @ the watch and saw easily that i was on wrong trail.
I’ve done street running, heavy woodland mountain biking, long countryside road riding, city road riding, and walking.
It has done an excellent job at all those activities.
I’ve no doubt it’ll have a brain fart at some point, but certainly given that spread of activity, I’ve not seen anything akin to some of the issues that people have reported.
I’m very pleased with the device.
(Note that this watch has replaced a day-to-day Apple Watch, and a dedicated Ambit3)
I forgot, despite that we are several that isn’t happy with satellite reception on them there seem to be many that are, so if i was you i would buy and try and if it’s not working for you, return it.
I have posted my problems on a Swedish running forum and i seem to be the only one having problem, of atleast ~5 others owning F5+.
I’ve to jump in here and say, that GPS-tracking also works pretty good for me (and I’m trail-running in GPS-unfriendly spots).
I’ve seen those reports (with tracks) from people having issues (one of them is even a Garmin sponsored athlete) and if I’ve had the same issues I’d also complain.
So the question is: are there (so many?) faulty devices or is there something else that can trigger those issues and I just have been lucky until now.
Marcus, in which way do you mean it’s possible to “trigger the issue”?
I owned +8 Garmin Forerunner models Before i bought F5+ and never noticed any irratic behavior on any of them, i also owned several Nuvi and GPSmap satellite recievers and they work just fine.
I can’t Think of any possibility to “trigger” one device (F5+) and not any other of the devices used @ the same time @ the same place.
I have run together with others with diffrent FR and Fenix 5 watches and they have worked 100% fine and my F5+ have been all over the Place.
I have no problem that there can be faults in Products, no one can produce 100% error free all the time, but despite the badness of my two F5 +, their support was even worse.
hi,can any one comment if there is really much differences between this new 5plus and for example the Garmin Fenix 5X.? now there are a few offers of 5x Sapphire for 659 which i think is a good deals because of the sapphire always been higher prices.thank please any comment is welcome.
Finally music capability! Just costs a steep $200 more :(. Oh, and I have the Fenix 5S Sapphire, purchased only 9 months ago, even more ;(. Why does Garmin do this? What about loyal customers who have already plunked down hundreds of dollars within the year and yet now their watch is worth so much less and to upgrade you spend effectively even more. I know tech is advancing quickly here, which is great, but I’m not into spending hundreds more on a new device every year. My previous device was the giant orange 310XT and it was good for 8 years, until Bluetooth really made it no question to buy a new device. Just venting, but maybe hoping to find others who share a similar sentiment. How long before they stop selling the non + 5 series units? I give it 12 months.
Hey Ray! Thanks so much for such a detailed review as always!
I’m looking to upgrade from my Fenix 3, so I know it’s a significant jump.
My question is in regards to the “less than stellar” open water tracking results you experienced during your video. Has any of that been addressed by chance?
Still sucks. I did an open water swim last weekend (latest firmware). Fenix 5 Plus on one arm – 920xt on the other arm. The 920xt tracked everything perfectly, Fenix 5 Plus recorded only half of the distance! It’s ridiculously bad.
I’ve had a Fenix 5 Plus for two weeks now. I got it right before going to the beach. Over 15 open-water swims, it failed to produce a single track if I didn’t stop every few hundred meters and stuck my arm out of the water (using GPS, GPS+Galileo, GPS+Glonass, Ultratac; and tracking smart or every second).
Starting two days ago, it no-longer recognizes my Stryd (even though my Fenix 5 does recognize it, so I know it’s not a Stryd issue).
Garmin is sending a replacement unit.
Overall, I am thoroughly disappointed with the unit, but I can’t say I’m surprised, as I’ve had similar issues with previous Garmin units.
I did a fair few OW swims out in Turkey on holiday with fairly rough seas, and the tracks were not that sucky….I think one out of 10 had a random spike in it, the rest were what I’d consider good enough!
defo swimming, but a 935 not a 5+ (as I hoped the screenshot showed) but I understand the 935 has similiar issues for some folk so trying to shed a Ray (sic) of light….
This was the walk I did to check the distance beforehand :)
and a second swim with the 935, the spike to the beach is correct as I took a floating plastic bag to a bin as there are plenty of turtles in the area!
Guys, just got a 5plus, went for a few open water swims with awfull results, it would stop measuring after 200m (the distance I have as default for autolap) I had to wait about a minute every 1Km for the watch to catch up in distance, generating several 200m laps at 25 seconds. Same issue with Galileo and Glonass and smart /1 second recording.
Hi Ray,
I saw one of your other posts with Fenix 6 improvements in Open Water track. Do you know if Garmin is still working on similar improvements for Fenix 5 Plus or it is like “we did it for current ( Sony) chipset and it isn’t our PRIO to take care of old ones (Mediatek)” ?
I am mainly running, but right now taking a pause from it during vacation and can compare my old 910 quality to newly bought Fenix 5 Plus ( Software 10.00) … 910 isn’t perfect, but in comparison to F5+ they are much better …
Bought a 5S yesterday and cannot figure out how to unlock the maps.. The unit instructs to “Unlock PRO to see the maps” and “START:Open menu UP/DOWN/TAP: change screen”. Anyone knows how to do this?
Hello.. I just received my Fenix 5 plus and the Optical HR sensor seems to not like me at all.. I haven’t had a problem with my Fitbit or the Apple Watch but this will not read my HR consistently at all-if at all… In speaking with Garmin they recommended a firmware reinstall or to simply return the unit. Is this a consistent problem for people of color? I typically run with the chest strap anyway so that’s not an issue for me but I wanted one device to monitor HR during the day and I loved my fenix3 but it was not the HR version.. Thought this upgrade would solve those problems but sadly no…
Just read on the Stryd site that they have run out of Stryd Live pods, and won’t be selling any more. Wow!
I’m not really sure what that means, because their tech support recently told me the only hardware difference between the Stryd Live and Stryd Power is the charging mechanism (Stryd Live having a mini USB plug, and Stryd Power having a non-plug, contact charger). The Stryd Live can be upgraded to Stryd Power via a Firmware update, so if that is something I wanted to do, I would have a Stryd Power that gets charged with a mini USB plug rather than a non-plug contact charger.
But anyway … anyone using Stryd Live with a Garmin watch (I’m hopefully taking receipt of my Fenix 5S Plus today)?
I’m curious if others are experiencing excessive post-GPS activity drain from the 5+. I seem to lose about 10% battery in the 3 to 4 hours after ending a GPS activity, and then the watch normalizes again. As it stands, I’m getting slightly over 4 days of battery life on the 5+, and that’s with only logging GPS activities on alternating days.
I’ve been doing a side-by-side comparison with my 935 and after 4 days with two GPS runs and two treadmills runs my 935 has 53% battery remaining and the 5+ only 17%. All the settings on the watches are identical.
I’ve been assuming (hoping?) this is a firmware issue as I’ve seen it reported by others in the Garmin forums but I’ve yet to receive a response from Garmin to my inquiry.
Yes, similar observation here. Got the 5P charged fully last night. Was 99% this morning. After a 55min run it was at 93%. Rest of the day was just a smart watch with notifications. It’s at 86% now.
Yes, same for me. Battery drain seems to be fine during activity, but post activity I am also experiencing increased drain while watches being idle. Fenix5+
Have the fenix 5X Plus. Watch still having issues playing music. Counts steps while driving. And have also obtained my floors goal driving uphill and in elevators. Regret buying this piece of crap.
Read somewhere that Galileo is the Europe version of Glonass.
Does it matter if I live in Singapore/Asian countries that I pick Galileo or Glonass for accuracy?
I am torn between the Fenix 5x with a metal strap, which I could get for c£570, or the Fenix 5x plus with Titanium strap for £1000. Do you think that the extra features on the plus justify the price difference? Any feedback would be appreciated.
I do prefer the look of the plus.
I can see you must be torn and feel for you. Why not read the reviews then you can make up your own mind which piece of overpriced crap to buy. If you do a little sport the polar vantage v is out soon.
Was shocked today when went to swim at a smaller pool…and was able to custom set it to the correct size!!! 17 yard pool. Been a feature upgrade I’ve wanted for at least 3 years!! Garmin must of release a firmware upgrade recently.
Hi Ray, I use Mac and tried to install Garmin OEM maps, such as Europe Cycling, and it did not work – memory fsil. Talked to Garmin CS and they reported the devide does not support the installation process because of the ammount of memory required to install the map database in the first place – important to note Garmin.com states compatible with 5S Plus. Important to note the garmin 5s plus has and had nothing installed beyond default firmware. So, it does have maps capability but you can NOT install new Garmin maps becuase Garmin map files are way too large….at least they refunded me the map $49…but still amazes me how these developers dont think about these very basic aspects…looks like many othe users reported the same to them.
hello Ray and thanks for this awesome review (you have some trusted readers here in Israel…)
I’m thinking about upgrading my suunto spartan sport WHR to one of 5 plus series but now I have second thoughts after reviewing some of the posts about poor GPS accuracy. my question is: is it possible that the GPS works differently in different areas around the globe? i.e. if I live in the middle east could I experience different GPS accuracy than someone in the USA?
Barometric altimeter!
Dear Ray, I have an idea how a barometric altimeter works and I know the issues, if the air preassure is shifting during an activity due to weather/temperature-changes. I was very happy to read about the option to activate “altitude-correction during the activity” on the new, map-based, fenix models. Could you please briefly explain how that works?
I assume the fenix is using the height information from its maps to perform offset-compensation not only at the beginning of the activity (like the older fenixes do), but also during the activity. How often does that happen?
Did you compare that feature agains an older fenix model and can you make any commets on the usefulness of that feature?
Sorry if this question has already been responded.
I have a Fenix 5 and iPhone 6. I want to have the information from the Fenix 5 while biking to be shown on the iPhone (bigger screen ; )). Is this possible?
You can get audio cues sent to your phone for various parameters such as HR and pace if that is of any help.
I suspect what you want could be developed as a third party app for Garmin Connect as I believe the SDK supports this though don’t know if one already exists.
If not and if this was something people generally wanted I could have a look and see if I could develop one. Might be an interesting project.
I have the 5S and I am wondering if the the plus would help with the following issues:
I jog on a track because I have arthritis and I hope the soft surface is easier on my joints. Usually I have run in the same direction, starting at the same point. When I have run in the other direction, or started from a different point, the gps seems to default to the mile markers from previous runs, so that suddenly I am supposedly running much faster than previously. This is by far my biggest concern. I checked today and I see that I was running with only normal gps, so maybe changing it to Glonass will help. I just don’t think the watch should be defaulting to previous runs in order to, supposedly, enhance its accuracy. That seems like cheating, and in my case of course it totally backfires.
(It’s very obvious because I run on the very outside of the track and it’s about three and two-thirds laps to a mile. When I change direction, I get the one mile buzz at the same place as usual, which is only three and one-third laps in that direction. One day I started from the opposite end of the track and the one mile alert was again in the same place, but one lap earlier! I run twelve or thirteen laps, so eventually it balances out in total, but that does not make it right and it still throws off the other statistics.)
The tracking of floors varies tremendously and it seems to be related to humidity in the weather and from my sweaty wrist. One day walking to the track and back, with no elevation change, I racked up seventeen floors!
Sleep metrics are not particularly important to me, but I notice that the time when I am lying in bed doing the crossword on my phone is when the app records ‘deep sleep’.
Let’s see if I get more response with fewer words. Does the Fenix 5 cache GPS data? If you do the same run frequently, and one day you change it just a little, does the map revert to how you usually run it? I don’t see any other explanation for my experience. I called Garmin and the support person said there is not a cache, but he did not explain the errors I get either.
No. It caches satellite positions for a quick GPS fix. To satisfy yourself of this just reset your watch before your counter sense workout. It will take longer to get a GPS fix but won’t affect the GPS recording or your GPS based pace. I have seen several posts from people who are unhappy with the GPS on the F5,F5+ series. It will certainly struggle on a 400 m track. A good GPS watch will work out your position within +- 2m (I don’t consider the F5/+ to be good). Imagine recording this every second. Worst case is it could be up to 4m/s. That is a whopping 14 k / h. Of course that is worst case and the readings will be smoothed/filtered but still pretty awful. Suggest you consider getting a foot pod which will give you much better instantaneous pace.
Thank you so much for answering! I do actually run with a foot pod, the Garmin one, not for instant pace but for the cadence primarily, and just because I have it. What puzzles me is the consistency of the errors. If it was just the gps being generally inaccurate, I would expect the one mile alert to come randomly somewhere between 3.3 and 3.6 laps every time. But clockwise it’s always at 3.6, and anti-clockwise at 3.3, which turns out to be basically the same place on the ground. Does that make sense? Also, it consistently tells me that I am going much faster in one direction than the other. On Saturday I got an alert after a couple of laps that said my performance was suddenly +7, whereas I have never gotten more than plus one or two before.
On the one hand, having a cache (and processing the information from a cache) seems unlikely in such a tiny computer; on the other hand I am really puzzled by the consistency of the difference between clockwise and anti-clockwise. Sigh. Again, I really appreciate you answering, even though I’m still baffled.
The only reason would be the GPS reception is different going the other way round. I guess you have to consider any obstructions to GPS reception in the locale and also which wrist the watch is worn on. It might be interesting to try wearing the watch on the opposite wrist for the counter sense workout (so it essentially “sees” the same sky).
I can try switching my wrist no problem, although it seems a bit odd. The track is in a large park beside Lake Michigan, so it’s pretty much open to the sky. You said the foot pod would help with tracking my speed more accurately, but wouldn’t I need to calibrate it with my stride length first? I believe my Garmin footpod obtained the stride length from checking against the gps in the watch initially. Am I wrong? Is it basically just silly to use gps to run on a track? Maybe I should just time myself as I run around the laps and turn off the distance alerts.
When you say reset the watch before the counter sense workout, what sort of reset do you mean? A total factory settings reset, or is there a place to specifically reset the gps?
Thanks for your responses. I was originally asking if the plus would be better in this respect, but it does not sound as though one could count on it being any different.
1. Calibration? Depends on the pod. Stryd is pricey but probably the best and works out of the box without calibration. Lots of people (including me) love their Stryd whether for power, instant pace or accurate distance measurement. Other pods need calibrating but this is usually merely a matter of correcting the pod estimated distance to the known distance using an app. Several laps of a track will give you a known distance. Pods are more than mere pedometers so you don’t need to measure your stride length (which of course varies). The accelerometers/gyros allow modelling of foot movement which is why they work so well.
2. Silly to use GPS on Track? It is probably not the best use for GPS. For lap pace – thats an easy calculation that you can do beforehand so you know what lap time(s) to aim for. The distance from GPS will be less accurate and therefore the lap pace/speed. GPS is not good for instantaneous pace as explained above. To emphasise the point: if GPS location is recorded every second but only gives position to within 4m (common for a domestic watch GPS) then even running at 50 min 10 k pace it is possible the watch would record your position as unchanged during that second – so stationary! Of course the algorithms are not that crude and filter the values (a moving average would be one simple type of filter) but then there is a tradeoff between stability and responsiveness. In reality “instantaneous pace” is short time interval pace.
3. Not a factory reset. Just press the top left and right buttons for around 15 s and the device will reset (at least my F3 does and F5+ did).
The bottom line: If you can afford it just get a Stryd. It is a bit expensive but a lot cheaper than an F5+ and a must have piece of kit.
The irony is that I didn’t buy the F5 for the GPS particularly. My goals are all about health, joie de vivre and managing arthritis pain, and I bought the F5 because I liked the integration of activity monitor and heart rate monitor. But when I was running the track the same way each time, I became accustomed to the feedback at each mile, and when I changed direction and the feedback was obviously wrong, I was upset, but mostly just really puzzled. I have to accept that there isn’t a cache because one, it doesn’t make sense that there would be, and two, no one else is reporting experiences that validate mine. So now I need to step back and recalibrate myself by remembering my actual goals. Thanks again for responding. It is so nice to connect with someone when I can’t believe what I’m seeing!
i was primarily interested in this Oximeter thing, hoping it would take automatically and periodically readings along a run so that i can see how my oxygen rate evolves along the time line. now reading your review it looks more like you have to be steady and triggering the reading by yourself. is that right? a connected question was about how the oximeter readings connect to Trainingpeaks (as TP recently brought support for that).
many thanks for the in-depth high quality review (as usual ) :)
Franz
Big thumbs up with very limited data for my new Fenix 5S Plus:
– HR from Polar H10 chest strap (“HR from this device – Always”)
– Stryd Live foot pad for distance (Distance from this device – Always”)
– GPS Plus GLONASS
– Mildly treed street run that I had pre-loaded into Garmin IQ.
Maps had me running on the correct side of the streets, maybe a few meters off now and then, but certainly good enough for what I need.
Also the calculated/displayed Pace seemed much more reasonable than that I previously obtained by using my phone for GPS – that was crazy variable, all over the place, this one looked like it was probably spot on.
I’m quite happy so far. It’s great running without my phone!!
Next step – to intentionally make a wrong turn, and see how it does alarming me that I am off course. Whenever I do a new run I invariably make wrong turns, so I will depend on this working well (as I travel and run new courses a fair amount)!
BTW, I downloaded the “Dozen Run” data field as my main running watch display. It’s pretty good, I recommend looking at it as a go to “Data Field” while running. HR and Cadence display is a little small, but those can be set up as separate data fields (downloading separate apps) one button up/down, and I found that clicking buttons during running is not nearly as distracting/a hassle as a feared it would be.
Thanks to DCR for this awesome site, and for all the guys and gals who answered my questions about the watch prior to my purchase!
A chest strap and foot pod is certainly the way to go for the most accurate HR and instantaneous pace. The core functionality of the watch (gps and optical hr) is not being tested. My F5+ wasn’t good at either though I know some folks are content with the F5+ series.
Anyone know about “3D speed and distance” on the Fenix 5S Plus?
If I wanted the distance to be what a tape measure placed on the ground of the hill would read … would I enable vs. disable the “3D speed and distance” option?
Because the Fenix 5 plus series should be just an interim solution and it was also available on the same day of the presentation, a new Fenix will probably be presented at the CES 2019. Garmin also had an interim solution in 2015, the Forerunner 225, and 5 months later, the Forerunner 235 was introduced. I think the new Fenix, like Polar, will have improved heart rate measurement, longer battery life, and integrated running power measurement, because even Garmin does not want to leave this field to Polar for long. Furthermore, the new Fenix will have a better utilization of the display.
Shoulda, woulda, coulda…. (as my Dad always likes to say).
I wouldn’t count on any new Fenix line a mere 6 months after the previous. Garmin’s never done that, and wouldn’t really serve them much. There’s significant benefit to Garmin waiting and getting bigger returns on their Fenix 5 Plus series manufacturing/distribution/retail investment.
I know a lot of folks like to use the FR225 argument, but that’s actually the singular case in Garmin’s entire history of outdoor/fitness devices that sub-1yr reresh occurred – and was mostly due to a confluence of weirdness on getting the FR225 to market later than they expected while needing to launch the FR235 for Connect IQ reasons. Given Garmin has released ~60 fitness/outdoor devices since 2015, none of which fit that pattern, I wouldn’t really use that as an example.
Most Garmin products right now are operating on a 1-2 year refresh cycle.Mainstream products tend to be at the 1yr cycle, and less mainstream products at the 2yr cycle.
Thinking about it some more, I have to ask (though it’s just a trivial question) … when would anybody benefit from running hills and having it set to “disable”?
I would turn the question around. Does anyone benefit from running hills and turning it on? The issue is that neither distance measured as a projection of your track on to a horizontal plane (well, actually a small nearly flat bit of an oblate spheroid) nor 3D distance are representative of the effort of walking or running up and down hills. 3D speed is not the same as gradient adjusted pace (GAP) or power. When you create a route most mapping tools give the projected route length and the GPX file produced does not usually contain elevation data. You might expect to have finished a route based on 3D distance but instead find that you still have a way to go.
Since race courses are measured out using 3D distances, I can’t see an advantage to not having 3D distances enabled on the watch while training?
I use a Stryd Live foot pod, which I assume must be 3D distance based. I’ll have to pay more attention to see if there is a significant distance difference between the foot pod measured distance vs. the distance calculated by the mapping program that I draw my courses on then download onto the Watch (5S Plus).
I take it back. I have just looked at the GPX file for a route exported from Movescount and it includes an elevation tag.
170
Suunto says:
If you are using 3rd-party software to analyze your tracks, check how the track distance is calculated. If the calculation is using 2D distance, you may not want to activate 3D distance in your watch.
Otherwise, if you are frequently exercising in hilly or mountainous terrain, you should activate 3D distance.
I’m looking to purchase the 5X+, but have been warned against the questionable battery life. I know the claimed battery life, what is it like in reality though. I’m going sure I’ll be using 24hr HR monitoring, in fact most likely only step counting in day to day use.
So I too have had MAJOR frustration with the lack of open water swim capability with this watch. Went through a number of changes with my first 5+, including satellite, data rate, etc., and nothing helped. Garmin exchanged the watch and took it out for an OW swim…and no difference. I had a Fenix 3 that tracked my OW swims pretty darn well. Guess I’m going back to that one. So many great things about this 5+, but I just can’t get past how terrible the OW swim feature is.
My LBS spoke with their Garmin rep, who claims they have a fix…but…
The really sad thing is my friend swam with his Apple Watch next to me, and had great data for the swim. Sigh….
Please Ray…tell me Garmin is going to fix this. Or can you suggest another multi-sport watch from Garmin that does all the 5+ is supposed to do AND tracks OW swims…
OK, here’s a tough one I think, it has to do with the 5S Plus VO2 max calculation/watch display. The Firstbeat.com white paper link to assets.firstbeat.com states they calculate VO2 max using an age-based estimated max HR (it doesn’t say which formula it uses) – so clearly there will be an error in the watch-displayed VO2 max if the age-based estimated max HR is off.
My self-measured HRmax is about 15 bpm higher than obtained using 220-age formula, and is also about 10 beats higher than using another formula I came across. Not knowing what formula Firstbeat uses to estimate HRmax, it’s probably fair to say it is underestimating mine based on the what these two formulae are predicting.
I’m trying to see if I can somehow get the watch to give me a more accurate VO2 max, given the built in limitation of its almost certainly using the wrong HRmax in its calculation. Anyone here have any ideas?
(I note that on Page 4 of the white paper there is a graph and a narrative that says if the true HRmax is about 15 beats higher than the Firstbeat-estimated HRmax used in its VO2 max calculations, then the Firstbeat-calculated/watch-displayed VO2 max will be off by approximately 9%. At first glance it would seem like to know my true VO2max I’d just need to adjust the watch-displayed VO2 max by 9% … but since it doesn’t say whether the formula-predicted/watch-displayed VO2 max would be 9% too high vs. 9% too low under those circumstances, that information actually doesn’t help me!)
Why? For training you just need to know your threshold in whichever parameter you are using for your training (LTHR, rFTPw or threshold pace) to set up your zones. V02 max calculated using the FB Algo should be consistent if not accurate so the trend in VO2 max is still a valid measure of progress within a 1 year time interval. If you want to know your true V02 max go to a sports lab and get it measured. VO2 max is only part of the story of performance and is heavily genetically determined / hard to improve. The ability of your body to deal with increasing lactate production as you approach V02 max is crucial and is highly trainable. You change a progressive increase as you approach VO2 max into to a sharp dog leg. This allows you to camp just below it during a long run and survive. I am 60 with a tumbling V02 max but I am still able to do OK because I run virtually at threshold. Maybe you should chase a different number?
“Why”? Because I’d like to know my VO2 max, like a lot of other people! :)
I don’t disagree with anything you wrote (except perhaps that VO2 max is hard to improve, I’ve read many places that it is easy to improve for the untrained athlete which is what I am now after taking many years off), but my point is that I’d like to learn a bit more about my physiology. If you’re not that interested in yours, that’s cool. But if the watch can display a reasonably accurate VO2max value, I’d sure be interested in seeing it!
I too am interested in the physiology of exercise in general and of course in my own numbers. I more heavily weigh those parameters that help me improve or pace myself in a race.
You are right that if your are relatively untrained you will see significant increases in estimated VO2 max. You then see diminishing returns and quite quickly approach a limit. It is this limiting VO2 max in the face of increasing training that is pretty much what you are stuck with. It is quite heavily genetically determined.
It is your metabolic clearance rate of lactate (MCR) that determines how close to the wind (limiting VO2 max) you can sail and this makes up most of what can be conditioned. I have sketched a graph which hopefully gives some insight into the increasingly dog leggy curve of lactate vs VO2 with training.
I find all these technologies give wildly different VO2 estimates (frequently just under 10 ml/kg/min) and also predicted race times (by over 5 mins in a 10k). For me Polar seems far more accurate in predicting my race times (to within seconds, slower, longer) than Garmin though paradoxically based on higher VO2 values.
Thanks for the graph. I love graphs! Just to confirm, the Y axis is serum lactate level, and each successive curve to the right represents further conditioning/improvement in VO2 max (I’d expect them to kind of get scrunched together as one moves right, maybe the graphing program didn’t allow that)? BTW, sorry, the physiology link isn’t working here, I tried on Edge and Firefox :-(
I think I hear you say that after I become somewhat conditioned again, following VO2 max will get kind of pointless, because the changes will become ever incrementally smaller.
I’m not even sure my running style is on the bell curve, as far as the assumptions that go into all these estimates. Without getting to navel-gazey for this thread I hope, I’ve noticed that I’m running at 90-95% of my true HRmax for all but the first 1/4 of my runs (just 4 miles at this point; with of course reaching full HRmax during the final sprint at the end). I do feel like I’ve got a good handle on true HRmax based on my running – I absolutely feel like I’m running all out, there is no chance of my speaking two syllables, maybe not even one, and I’m moving boatloads of air in and out of my lungs it feels like (Polar H10 chest monitor used).
A little OT, maybe … besides wondering if that is bad for me (just in case it is, I only run every 2nd day, and my resting HR on run mornings is low, and I feel pretty good on those mornings), I wonder if that running style (pretty much pegged very close to HRmax for most of the run) would throw off any “brain” in the watch that calculates VO2 max, and all the other very cool sounding performance parameters it can display. If you had any thoughts (as the closest thing to an exercise physiologist I know!), I’d love to hear them.
But back OT … given the limitations of following VO2max improvements after achieving a certain decent level of conditioning, would you recommend one or another of the watch-displayed parameters to track as a surrogate for the less static improvements in “metabolic clearance rate of lactate” that occur with further conditioning? Besides, of course, total running time over the same course, ha, ha! ;-)
Thanks again Andrew, I really appreciate your answers.
P1. Correct. Its essentially a sketch on the back of an electronic fag packet but I should have “scrunched them up”.
P3. Keep your running style as the evidence is that changing it is likely to lead to reduced performance despite the hype around this. You could well have that high a HR. I have noted that my LTHR has reduced as I have become fitter but my max HR has not changed significantly. The HR you achieve as you sprint at the end of your 4 mile run is not your max HR. Max HR is just one way (and IMO not the best way) of setting HR zones.
P4. Probably. The problem is they do not calculate but statistically infer these metrics. Change your age in Garmin connect and see how it affects your results!
P5. Running time over the same course, such as a Saturday Parkrun, is a great way to benchmark improvement. Also of interest is your running pace on the flat while parked at your lactate threshold. For may athletes these are pretty much the same thing! This can be displayed in Garmin Connect.
I think we had better stop there as interesting as the conversation is it does not specifically relate to the F5+.
Hi Ray. Would it be easy / a good idea to set up a page not for a specific product but for threads that may be of general interest but are a little off topic (and long)? You could call it “Off Piste”! You could then truncate a long thread with a link to its continuance within “Off Piste” rather than risk offending through summary deletion. This would not require redesigning the site. Of course I realise I run the risk of people commenting that Andrew is off piste again! (-;
I can update: The nice folks at FirstBeat say that if one replaces the default (220 minus age)-determined HRmax in the Settings menu with a manually-entered one (perhaps determined by actually running), the VO2max calculations will reference the manually-entered HRmax value, with accordingly different results.
am i missing something here – in australia JB hifi have the Fenix 5 for like $400 less than anywhere else. link to jbhifi.com.au
Am i missing something on this model? have been thinking about the Apple watch S4 but the battery life i think would drive me nuts. I’m manily a cyclist but looking to do long off road runs. currently use a Fitbit charge HR day in day out for HR 24 hours a day and sleep monitoring. Thoughts people? go the Fenix 5? Apple watch or maybe a higher model in the fitbit line?
Just did a 6 mile first run with a new Fenix 5 Plus Sapphire. Running with my daughter, then we compared tracks. It’s ridiculous. It’s awful! Her old Forerunner 235 ($250) is spot on, my $800 brand new Fenix was going through yards and peoples houses.
The track is so off, it’s a real WTF??
To it’s credit, the total distance was within 0.02 miles of each other, spot on // they probably use factors to correct.
I’ll do a few more runs, but if it stays, this is going back. NOT A CHANCE of keeping this with this non-accuracy.
Maybe Garmin should focus on getting the weight down and GPS right instead of adding more features? If the GPS is off track, the weight too high for proper sports, then the whole reason for existing is gone.
I use “GPS+GLONASS” for the GPS watch setting, and a $99 foot pod (Stryd Live). I run through neighborhoods, mildly to moderately treed. My map tracks are perfect.
Even if you don’t have a foot pod, maybe if you chose “GPS+GLONASS” instead of “GPS” you might get better results?
(This is in the US. Maybe in Europe “GPS+GALILEO” might be a better option?)
I am US based too. GPS was disaster, GPS+Galileo was, believe it or not, worse. It’s ridiculous. I am so disappointed.
I’ll try GPS+Glossnas as the last resort. I am not hopeful, since Glossnas actually has a worse resolution/spec than GPS, but let’s see. Thankfully I bought this at REI and can return it.
I saw today the maps weren’t perfect, they had me running a few feet onto the lawns on the side of the streets that I run (I don’t run on lawns). It did have me crossing the streets at the right time about half the time maybe, but at other times it had me running in the middle of the street. (GPS plus GLOSNASS).
Though I’d like to have it display “perfect” tracings, TBH it doesn’t affect what I do to any significant degree. My foot pod (Stryd Live) tells me the exact distance I run, and just as importantly, the watch gives me a very accurate heads up when a turn is coming up (I run new courses in different cities pretty frequently).
I guess so far I’m pretty happy with it, waiting for some disastrous error in data calculation or presentation to ruin my experience, but none has happened yet (about a week and a half of running)!
Nedim, when you say it was disastrous, what are you referring to?
Yesterday I ran with a running group and 4-5 other people uploaded their run to strava as well. Looking at the flyby I see all lines converging on the road. There is one that is off, zig-zagging through commercial buildings some 30 feet off the the side. That one would be me. There is also one that missed the boat on a turn. That would be my track as well. $800. I paid $800 for this crap.
Coming off a 735XT this is pretty disappointing. While I realize I’ll never get the near perfect accuracy of my old trusty Suunto Ambit 2 back, pretty much every Fenix ever was a disappointment (F2 was probably the worst, F3 was not great either). I believe that the metal case is the cause — putting a sensitive antenna into an almost Faraday cage can’t be helping.
A week and 3-4 runs into it, I returned it today. What did it was my daughter did a lunch run with her 235 and the lines were spot on. I literally had envy, and went straight to REI and returned it. I can’t have this crap.
I did get the 935. It’s lighter and costs $300 less. Music was not a priority for me, the maps were neat, but I can live without, same with Garmin pay, easier to get phone out of pocket than enter the security code. Did I mention it is way lighter and feels like a sports-centered and not fashion device?
My wife has the F5S and on two runs we did together her GPS trace was somewhat cleaner than my F5+ (but still no-where where it should be). Since the 935 is a F5 in plastic, I am hoping the plastic vs. metal case of the 935 will help with the signal strength.
And if the 935 GPS sucks (per fellrnr, it does. I know Ray has some doubts on his methodology, but I found him accurate), well, at least I paid $500 not $800.
The 935 GPS is perfect. Whereas the F5+ could not hit the street, the 935 nailed not just the street, or the side of the street, it nailed the sidewalk I was running on for over half the run.
Hi – hoping someone might be able to help me get my watch to display lactate threshold values that it calculates from hard runs (i.e., that it calculates without doing the specific test that it sets up).
My understanding is that there are two ways for the watch to calculate lactate threshold – to do the specific test that it has you run, vs. that it calculates it “automatically, in the background” during hard runs.
I am “training by racing” 5Ks, and my HR is pretty high, for example for every step of the last 13+ minutes of today’s run, my HR was greater than 94% of the HRmax entered into the watch (that’s a pretty typical run for me).
What am I doing wrong … shouldn’t that trigger an automatic lactate threshold calculation by the watch? When I go to Garmin Express, it says , “You have no lactate threshold data for this time period” (I’ve had the watch a week and a half, have gone running 5 times with it, and four of those five times have been runs with these high heart rates for way more than 10 minutes straight).
You are learning fast! Lactate threshold is the way to go. (-:
Garmin’s (First Beat’s) automatic algorithm is a little unpredictable and it won’t give you a result for each run. I suspect it needs a range of values for both pace and hr so running continually “eyeballs out” such as in a 5k may not give it the range of values it needs. I know this sounds odd as threshold is defined as the maximum pace you can sustain for 30 mins. You read the FB paper – take another look and tell me why this is so? If you wish to use the automatic algorithm first check it is enabled. Try running slow at the start and slowly building up during a race to your maximum effort. Alternatively just do the guided test (which pretty much does the same thing). Of course you don’t need either the automated or guided test. Just see what your average HR and pace is at max effort over 30 minutes. You may already have the information required depending on your 5k time.
P.S. correction – average HR during the last 20 mins of a maximum effort (or race) of 30 minutes (hr response to exercise seems to be the sum of two exponential functions with shorter and longer half lives).
I’ll go back and read the FirstBeat lactate paper in as much detail as I’ve recently read the VO2max paper (it’s been a while since I read the lactate paper).
I guess I could go ahead and do the “watch-directed” runs to get a lactate threshold, but (and I know it’s a personal problem!) I don’t want to be running at slower speeds, it just bugs me when I do it!
I thought that the ramping up of HR to max that I’m seeing in my runs (in retrospect, my eyeballs are still “in” during the first 40% of the training run, I think) would satisfy the minimum variation in heart rate required by the “lactate threshold test”, but perhaps not. (Oh, and thanks for the hint to ensure the “auto calculation” of lactate threshold was enabled in the watch, it was)
With any luck, a picture of today’s HR over the course of today’s run will be uploaded with this post. I guess I’ll try another run or so as I’ve been doing, and then if there is no autocalculation, I’ll have to decide just how much I really want to know the lactate threshold (translation: just how much I *don’t* want to perform the watch-directed lactate threshold test).
Maybe I should mention that the steep stairstep “bump” in HR at 1.3 miles was a little hill, then it was a little bit more up hill after that. Looks like my HR never recovered from that. The last 3/4 mile or so was actually downhill, I think my HR stayed high in part because I definitely am running out of steam there, “eyeballs out”, thank goodness it’s not still uphill anymore at the end because I don’t know if there’s anything left I can give at that point!
Polarise your training. If you run flat out every run you will asymptotically approach a lower level of fitness than if you mixed it up a bit with some long slow runs, tempo runs and intervals. 80 20 Running is a good read (rare in this genre). Train smarter.
link to google.co.uk..i&docid=LFFllXC3elhCKM&itg=1&sa=X&sqi=2&ved=2ahUKEwicsPv3zundAhWtm-AKHT4DDgQQ_B0wDHoECAcQFA
Garmin doesn’t say they are picky over the type of chest strap but I have only ever used a Garmin one, not out of brand loyalty but because my F3 is ANT only.
OK, though I’m far from the most suggestible or gullible person there is (at least that’s what everyone tells me :-0 ), I bought that book. I just couldn’t stand the idea of being sucked into a vortex of asymptotes, what could be worse!
I bought a Polar H10 chest strap long before I the Fenix 5S Plus watch. They seem to work just great together. I wonder if your comment about the Garmin strap was just informational, vs. whether you saw something in my Polar H10-obtained HR data that raised some concerns?
Notne, you will not regret buying that book. You can learn to enjoy running slowly, and see your Fitness increase. It was hard for me to believe, but it really works. I spent years training too hard, hoping to get the most benefit for the least amount of time. Just bad idea.
Mr. Fenix decided to give me a Lactate Threshold today*, 160 BPM. So I guess I really do have to train with HRs as high as shown in the graph above if I want to improve …? (80-20 book hasn’t arrived yet).
My run this morning was out of the norm:
– I was sleep deprived after a day of air travel,
– I’d overeaten the night before,
– I was running in a new location, much hillier than usual for me,
and I didn’t have the mental energy to run all out like I usually do.
So maybe Mr. Fenix felt sorry for me and decided to give me my first lactate threshold value so I’d feel better!
NO. The opposite is true. You should do 80% of your running BELOW your LT. Only 20% should be above. That is the summary of the book. 20% hard and 80% easy gives you the maximum training effect. The book will prove it, with much research and documentation.
It was able to give you an estimate because you were running slower and at a wider range, with the hills I assume. Or just finally had a large enough number of runs.
If you weren’t feeling well, that probably adds more than usual error to the calc. But as you continue (begin) to run a range of speeds/efforts, it will get better.
I’ve purchased the 5X + and don’t enjoy the silicone/rubber strap.
I’ve decided to purchase the nylon nato strap from Garmin as I find it comfortable and hardy – I also don’t use the optical HR as I prefer the old fashioned chest strap, so no problems with it being covered.
My question is, what is the lense/HR made of? I’m worried that the friction of the strap would possible scratch the lense thus damaging it – my wife prefers the optical HR and usually uses my devices as I upgrade, I’d like to ensure that this one remains intact for when she elects to disposes me of the unit.
I can’t find anything online regarding the material or propensity to scratch, or even if it makes a difference in terms of the accuracy of the readings should it get scratched.
Hey Folks! Just as a quick heads up for those following along on comments…
Garmin just released Spotify support for the Fenix 5 Plus series, available for download now. I’ve got all the details including a video of how it all works here: link to dcrainmaker.com
Hi Ray, Maybe it would be a good idea if you update the review to include the Spotify news. I really think that this is a game changer. I might be updateing my Fenix 3HR just because of the inclusion of spotify playback.
[I hope it’s OK to post this here … I really didn’t know what else to do (I don’t use social media) … DCR, if you have to delete, I understand.]
Hi – Anyone else having trouble registering on the Garmin forums recently?
I see they are alive and well over there with current posts, but no matter what I do, I can’t get it to accept my username/password. I’ve changed the latter a million times, tried it on three different brousers … all with the same results (it just brings me to the page that says “Login” at the top instead of showing my username up there).
And I’ve contacted the webmaster 3-4 times over the past few … months, yes! … and gotten no reply.
It’s like I’ve died and am really a ghost as far as they are concerned, and they just don’t see me.
Would anyone have the official email of a moderator or on that site I could email about this? Or other suggestion?
Hi – Since it looks like I may never be able to sign up for the Garmin forum (as I wrote above) … can anyone recommend a friendly, high-quality running forum where folks can ask questions and get good, encouraging answers?
Hi – Can someone help me with some button-ology on the Fenix 5S Plus please?
What I wanted to do was set my watch for a distance alert of 2.5 miles which I would run on streets I would randomly select during my run … then when it buzzed at 2.5 miles I wanted to activate the “Navigate home” feature so it would send me home (thinking I’d be all lost in this new town I’m visiting and wouldn’t be able to get back home easily).
The first part went fine, I programmed “RUN” to “SET A TARGET>DISTANCE ONLY”, and it buzzed appropriately at 2.5 miles. But when I tried to then go to the “NAVIGATE” menu by hitting the button up at 2:00, it instead thought I wanted to end my run (that wasn’t surprising to me as I always end my run by hitting that button).
So I couldn’t figure out how to enter the “NAVIGATE” menu while running in the “RUN” menu, to have the watch guide me home!
Any hints please?
Thanks!
PS – First “slow run” ever, as a result of skimming through the 80-20 book last night … :)
The music on Jaybird x4 earphones was adequate when I ran last week, and today too it only skipped a little on my way to the run, and when I slowed to a walk after the run. However, while I was running with a new Stryd footpod it was skipping literally every split second, so that I thought maybe the Stryd and the music were taking turns on the Bluetooth channel! Probably it doesn’t even work that way, but that’s how the skipping sounded.
I looked up the connections for Stryd, and it has both BT and ANT+. Does it always connect to the Fenix 5 plus via ANT+? I don’t see any way to check the connection. What do I do now? Give up on Stryd? Buy new earphones? Any suggestions?
A second question: for people who run outside with Stryd, is the consensus that it is more accurate for distance and pace than GPS? Should I put Always instead of Indoors? Obviously I know what Andrew thinks, and Fellmr, but I was wondering if there is any/much disagreement.
Following with interest on the earphones/Stryd potential interaction. FWIW, I run with a Bluetooth chest strap (Polar H10) and Stryd Live … so at least in my case I think that means the Stryd Live is not using Bluetooth, since that is already taken. Now that I write that, I see that probably isn’t helpful in terms of figuring out whether the Stryd could use Bluetooth under certain circumstances.
Re: your second question about Stryd better or not than GPS for distance/pace …
I’ve used both, and found that:
1) Pace with GPS was all over the place, way up-then-immediately-way-down, in a non-physiologic way I mean, which I interpreted as meaning that it’s distance calculations were way off.
2) Pace with Stryd is very smooth, and seems reproducible run to run.
3) I’ve read that GPS is only good to a matter of meters, which I interpret to mean I could move 1 foot, and the GPS will think I’ve moved anywhere in a circle of several meters with me at the center … i.e., over short distances it could be way off.
4) I used Stryd to send me on a run 2.5 miles out, and when I returned for a total of 5 miles, I was within a few yards of the starting spot … pretty good, I think!
So, I put “Always” (like I do with my chest strap HR while running, then put it back to “Wrist” when I’m not).
FWIW, I’ve emailed the Stryd folks with questions of this nature, and they are great at answering quickly, and backing up their answers with some 3rd party data.
Anyway, I hope someone smart comes along and gives their perspective … I’m just a newbie!
PS: Do you belong to any running forums you’d recommend? :)
Just to say that I bought some of the headphones specifically recommended by Garmin for use with the Fenix Plus, and now it’s working beautifully. I wish I had seen that list before I bought the Jaybirds, but they work fine indoors at least.
So a lot of discussions have been held about battery life and optimalizations to it.
I have tried to find (also above, from dealers and online) just one thing in addition to it;
Every Li-Ion battery has a certain capacity, commonly expressed in mAh.
When i’d take a multiple-day hike with possible a 5+; i am wondering how many charges i can give from a power bank? Considering a 20% charging loss and knowing what the capacity of the battery will be, i’ll know.
So; the question is; anybody an idea what the actual capacity is? (in Ah or mAh?)
Do you know/have the chance to ask if Garmin is planning on enhancing the SMO2 features? Specifically something along the lines of what BSX/Moxy do/did for LT testing or similar applications? That would probably tilt me more in the direction of the 5X+ vs the 5+. Well, that and the longer battery life.
Question regarding navigation. I have other 3rd party maps that use in my Garmin Oregon device. Can I upload these maps on this watch (is the map format compatible)? Can I also upload many tracks and waypoints? Basically, I’d like to know if this watch can replace my Oregon when doing short hikes. I often use detailed topo maps to discover hidden beautiful places (lakes, creek, etc).
now…after 3 months … I find 5x a decent watch….the only things that kinda dissapointed me are GPS accuracy (especially in areas where GPS is a bit harder to find…near buildings, in the forest,…)…Suunto ambit 2 was much better in this area…??
and also wrist HR…it is accurate as long as you are not moving…but during activity…well it is all over the place…??
Are these maps good enough when out skiing to make sure you get the right turn home in a whiteout? Somewhere like the Trois Vallees is massive and a wrong turn at the wrong time could lead to a very expensive taxi ride!
No. But frankly, neither are paper maps. I wouldn’t be moving anywhere skiing in a complete whiteout in Trois Vallées (been there, done that, no thanks).
LOL, but sometimes the weather comes in and you need to get home/get into the trees! I’ve had many a happy(!) time skiing from piste pole to piste pole to get home!
To be fair, for the most part screwing up in the greater Courchevel area is harder to do than at Chamonix. It’s actually a reason I prefer the Trois Vallées for skiing over Chamonix. With Chamonix you’re totally dependent on weather. When it fogs up, you feel like you could make one wrong turn and fall off a gigantic cliff thousands of feet (because, it’s true).
Whereas with Trois Vallées, you have to make a lot of wrong turns on most runs to get anywhere near major cliffs.
Is there any way you folks know how to customize the Garmin platform GUI in the following ways?
1) Have the display of the course track I’ve just run be color coded for HR, speed, elevation, and others?
2) Change the Y axis on the graphs so the data range takes up more of the page (right now it is compressed so much that it would take a massive change to even be visible in the display).
Dear Ray and fellow readers,
I’ve been using my Fenix 5 Plus for several months now and I absolutely love it. I’m using it for running and as my Bike-Computer. The routable map-functions are the main reason for my upgrade to the new version, however there is a MASSIVE problem with the navigation on the fenix, making it virtually useless when riding on the bike and following a predefined course:
Each time when there is a corner to be taken, half of the display is being covered by a massive arrow pointing the way of the bend. This is increadibly stupid and annoying, as the arrow is destroying the context of the bend by covering my recent position and the trajectory to follow. E.g. if there are two paths on the left and the watch is signaling to turn left, that stupid arrow is blocking the context and I can not see, which one of the two possible paths on the left to follow. That context of a turn is actually the whole point of having a map in the first place, but on the fenix it’s flawed.
I tried to enabe and disable every option on the fenix to turn that stupid arrow-direction-prompts off, but they always show up, when I am following a course.
So Ray and you fellow readers, did I miss one setting in the fenix’s menue where you actually can turn off that prompt or is it always showing up, when following a course. If the latter is true, Ray, could you PLEASE communicate to Garmin to add an option in a future firmware-update to turn those prompts off or to make the arrows way smaller, so they do not cover the most important positions on the map?
Used to annoy me too. If you start at the end of the route and go the wrong way round I found the thing had a fit and showed you all the direction arrows one after the other after which I seem to recall they went away. Of course your direction little red triangle is then 180 degrees out but you might be able to live with that! Alternatively once those daemons have been exorcised head back the right way round. I think it is to do with how the user interface pushes views on top of other views. From a software development PoV this is good as you don’t need to know anything about the view underneath. It would be better if the view supported an alpha channel so you just saw the arrow overlaid on the underlying view. I don’t think the graphics chip is that sophisticated but good graphics is power hungry.
I can cope with the big arrow, what I struggle more with is that, while the GPS is clearly tracking my route very accurately, the final “turn now” instruction is often about 20 metres late.
Most of my routes are automatically created by Plotaroute. Suppose I could tweak them so that all the turns come 20m early, but wondered if anyone had any suggestions?
Same here. The big arrow is blocking my view of where to go. Also, these black prompts mis many of my turns in Strava or komoot created routes. Therefore I now cycle (race cycling) with my screen continuously showing the map and only two other useful metrics.
When the ‘navigate to start’ function is used I do get proper notifications, in map arrows instead of a black overlay and even street names like on the edge series. How can i get this type of navigation for my own routes? Using the ‘map’ instead of ‘follow course’ options leaves the watch in endless calculation mode even for 5k routes I’ve tested.
i am looking for something that can show me my HR WHILE swimming. Not to download later, but to see my HR doing my laps. I would like this device to be a watch that I can use for other functions, though any wrist wearable would work.
Can the Fenix do this? If not, is there a device that can, and what is it? Thanks.
Andrew, thanks for the quick reply. Not sure of these devices. Assuming H7/10 is chest strap, but don’t know manufact, and by V800, is the the polar watch for about $300?
I guess a wrist device from fitbit/Garmin etc that does HR won’t work while swimming, not enough contact area, for long enough, or water between, etc?
I’ve been looking at the Fenix series for over a year but haven’t jumped the gun and bought one yet. I see the $150 off that started this week. I am looking for the best watch for ultra trail running and more specifically races that last 20-40 hours. I can charge during the race but don’t want to do that many times. I like the Bluetooth technology for text and email alerts. Mostly looking for an accurate and dependable gps watch for training and racing.
Ok, I just posted that the Plus models are now on sale for $150 less, but older 5()s are starting at $399. For instance a regular 5 is 399, the 5Plus is 649.
You don’t get music on the phone, or nav. And no sapphire.
But I don’t need music. I have a bike computer for nav. So what am I really giving up for the $250 extra. Is it worth spending that extra money?
No resolution on ANT+ sensor issues, so really just depends on what you use. If you use Stryd, I’d avoid the Fenix 5/5S (5X is fine). Most other sensors haven’t been a huge deal though.
So the GPS is similar on the 5Plus as compared to the 5? I have read that there are still some issues with the GPS… I know you originally mentioned that it was equivalent to the 935, but has anything popped up since?
You also mention in the last sentence that you may switch our your FR935 for the Fenix5Plus. I am considering purchasing one of the two. I mostly run, but enjoy testing new routes and the ability to create them on the go with the Fenix5 Plus entices me. What would you suggest?
I haven’t seen any meaningful issues on either (except openwater swimming). Certainly like any GPS I can find the odd track here or there, but nothing earth shattering or systematic.
I’ll mostly use the Fenix 5 Plus as my daily driver when I’m done with the fall sweeps of watch reviews. Right now my wrists are pretty full of other test activity trackers. :)
Any news of the battery problem? My watch kills the battery after a workshop out.
It’s fine during the workout but drains it after.
I have understood that this is a major problem.
Have you heard of this? And do you know if Garmin is working on this?
I’ve not had this on my Fenix 5S Plus, but have heard of others having it in their Plus series watches.
When I first got my watch, as soon as I got back from a run, there is WiFi sync of my watch to Garmin and Stryd. I turned off GPS and chest strap HR (replacing it with wrist HR) right away, and Stryd Pod, so it doesn’t keep searching for those. Is your watch searching for something all day? I don’t use music.
I really don’t use it for much of anything during the day except time and wrist HR, so it starts out each morning pretty near fully charged. Lately I wouldn’t notice it even if it were happening, because I plug it in immediately to sync when I get back from a morning run, and then leave it plugged in while I shower (so it’s charging then), so it never really has a chance to drop.
I wonder if your charge drop occurs at any starting charged level, or is more when the level is farther from 100% charged?
Help with buttons please – I lost a run last night …
“Navigate – Saved Locations – Go To”
I had previously saved the location for the house, was about three miles away, and wanted the watch to direct me home. I called up that location by pushing the above buttons, waited for it to finish “Calculating”, then hit start. I waited for the Green arrow, and started running.
When I got home, there was no distance data saved! The display on the watch was “–miles” and “–speed”. It did save the time duration of the run …
Two questions please:
1) Is there any way to manually draw the route into Garmin Express, “this is what I ran last night”? I know the time it took and so I’d at least get a rough approximation of the run into Garmin Express.
2) Did I do something wrong in my button pushing last night? Does anyone else use the “Go To Saved Location” feature? It sure would be handy if I could make it work!
If it said “Speed” and not “Pace” my initial thoughts are it used a “Bike” activity, instead of a “run.”
If that’s the case, the distance didn’t track because it’s possible you never went above the speed threshold for the “Bike” activity to count it as movement.
I don’t think either are great. If you want instant pace and accurate distance then a foot pod (calibrated) is the way to go and Stryd is probably the best. You could also dabble in training with running power with the Stryd.
A few days ago i installed the new update for the Fenix 5, since then it stopped to connect to my polar bluetooth heart rate sensor. I contacted Garmin and they told me that the watch was never designed to connect any device except smartphones via bluetooth and that they might have fixed that “bug”.
Do you have any idea, why my sensor stopped working and could the guy from garmin be right?
Garmin and swimming?
Why is it that there is no auto pause for indoor swimming? My three year old suunto ambit three does auto pause for swimming quite well. Its not called auto pause, when your swimming sets of 100s or 200s it knows when you’ve stopped and gets the interval distance right. My Garmin fenix has the interval distance and the total distance as the same. Unless I press the back button every time I rest between sets. It seem ridiculous that you have to remember the back button each time.
I know people have been asking Garmin for years, what’s their answer for not adding
this feature to the Fenix series?
How about open water swims displayed in yards on their watch. Why can’t this be changed to miles? Why is Garmin indifferent to swimming?
I’ve been unable to find an answer to a rather simple question: Is it possible to differentiate via either sound or vibration between different alerts? That is, if one’s to set a pace alert, as well as a heart-rate one, with navigation alerts turned on, would it be possible to tell which alert just went off without looking at the watch?
Great review – thanks! What’s the easiest way to get an audiobook from Audible onto the Fenix 5 Plus? I know it has to be done on the desktop, but is there a streamlined way to accomplish this?
I’m interested to buy the 5S Plus now, considering the current discount. But I have a concern about battery life when using gps. The regular or the X one will get more hours, but the 5S better fit me.
Do you think it’s good enough for a full day of hiking? What about doing hiking during the winter (cold weather)?
I know I could use Ultra Track but this feature doesn’t seem to work well, from what I read in other forums (too weak accuracy). Is there a way I can change the gps mode and choose the frequency between track points to get better battery life while keeping a good accuracy? If so, can I still use trackback feature?
Also, any rumors for new watches on the upcoming CES? I would like to see Garmin offering maps on cheaper watches. A Vivoactive 4 Map would be great!
Did I understand correctly that open water gps accuracy is now OK after gps firmware updates? Quick reply would be highly appreciated since black friday deal ends in 24 hours.
Thanks Ray for best reviews as always..
Sooo… if i’m correct, f5 plus is still vastly inferior to f5 in outdoor swimmining? :-(
i want to jump in and replace my ageing f3 (without HR) and would love to have routing maps (for trail running) and i don’t care about garmin pay and music (and I don’t like the design of 5X – i find 5X plus nicer)
of course, there is a question of price for a non-perfect product… i can get f5 for 350 EUR, while f5 plus (non sapphire) for 620 EUR… maybe i should wait for next black friday… :-)
I am on “Software is up to date — Version 6.0.0.0” which I understand is the latest available software update.
I did the Ironman 70.3 Indian Wells La Quinta with it in early December and the result was still appalling: It tracked a total of 50m on a 1.9km course!
So no, definitely not working for triathlons (hopefully yet)!
Has anyone else had issues with the 5X plus rebooting constantly? I see lots of comments about it on the Garmin forums and no solutions. Contacted Garmin about it and no solutions there either except returning the watch. Seems its related to syncing with the Connect app.
Anybody know if the Fenix 5 S Plus can receive data from an ANT+ spin bike?
My gym uses the Spinning Blade ION and according this site “when paired with a compatible device, the ION computer will also broadcast a data file to the device that will record the ride data, including ride time, power, and kilojoules.” According this page, the Fenix 5S Plus is a compatible device.
However, I cannot make my Fenix pair with the bike no matter what I try.
I’m looking at moving from the 935 to the 5+, only because I’ve been through four 935 watches! The altimeter broke after a swim each time, with two breaking the OHR also.
I do a lot of hiking and am worried the 5+ battery life isn’t long enough for me.
Greg Hilton, I think you have had the same problems as me. Did you upgrade from the 935 because of the many units that break? I guess it’s bad design rather than user error. I’m a small girl who just swims sometimes so i want this function to work properly. Your 935 tracks look good to me now. How long as your units lasting?
Frightened to shell out £650 if it’s gonna break whilst swimming.
If Garmin has such a deep bench of developers why is it that there is no auto pause for indoor swimming? My three year old suunto ambit three does auto pause for swimming quite well. Its not called auto pause, when your swimming sets of 100s or 200s it knows when you’ve stopped and gets the interval distance right. My Garmin fenix has the interval distance and the total distance as the same. Unless I press the back button every time I rest between sets. It seem ridiculous that you have to remember the back button each time.
I know people have been asking Garmin for years, what’s their answer for not adding this feature?
I have the original Fenix, believe it or not. It has been replaced once with a refurbished unit from Garmin, but it’s been a steady companion for years. I use it kitesurfing, mountain biking, and road riding trips in Europe. I love it for travel, battery lasts ages and I don’t worry about it getting ripped off my wrist thanks to the subtle design. I think it might be time to upgrade! I’m torn on sizing. Do you know how these sizes compare to the original? Honestly the original was a little big for my relatively small frame (5’11” 155#) and bulges out of my wetsuit. 5X would be way too big I assume, but should I go all the way down to the 5S? Or has the medium size shrunk compared to the original, thanks to advancements in the tech? Are battery lives any different between the 3?
going to answer my own question in case anyone is interested. The original fenix is 49mm x 49mm x 17.75mm. Measured using calipers. So the new Fenix 5 47mm is quite a bit smaller at 47 x 47 x 15.8 mm.
Hi James. Yes but the Fenix 5x plus does not have sufficient GPS accuracy to pinpoint your position to within a meter so the 5th digit of each …ing is not meaningful.
Thank you for the great reviews and forgive me if this has already been asked as it would make sense for a multi-purpose watch. How do you get the unit to pick up the Garmin Radar on non bike mode activities such as running ? There are many back and roads mountain roads that people run on with the occasional car…it would seem beneficial if you could run with the radar attached to a running pack and get vibrations on your watch…it would seem that this would be a minor programing tweak.
Can anyone with one of these watches that is paired to their iPhone …..
When you set the music source to “Control Phone” can you do any more than Play/Pause/Skip etc i.e. can you browse and select the music/podcast/audiobook to play on the phone via the watch like you can in any modern car
i.e. you get the same menu structure you see for music/podcast/audiobooks that you have loaded onto the watch
I have bought a Fenix 5x Plus and I have tried to transfer to it one song in MP3 from my computer. I have not been able to do it. I have tried for quite an amount of time. I am probably doing something wrong. A brief guide from any of you to transfer an MP3 from the computer to the Fenix will be more than welcome.
I purchased 5 Plus in November, have been trying out for about a month. GPS is a problem at this point: works in Davis, CA (my home) sort of, but won’t work at all in Tahoe City, CA. When I try to look at maps, all I can see is the same map of Davis, CA. Altimeter keeps shifting and is usually incorrect. Still working on distance measurements, calibrating, not settled yet. So a work in progress, I don’t have an answer that’s definitive in response to “Is it worth the money?”
Mike Harty
Hi Ray, I bought a Fenix 5X Plus in Mexico by Best Buy Mexico, the watch has loaded USA and Canada Topo maps.. I sync the watch with Garmin Express And it doesn’t load Mexico Topo maps, I called Garmin support and they said Garmin units sold in Mexico don’t include Mexico maps.. that’s sounds ridiculous… I just hope the guy I spoke to didint have a clue… so I can’t use navigation, maps or trend lines… what would you recommend me to do?
If I’m reading your question correctly, the Mexico maps while are included (very strange indeed!), but are still downloadable from the Garmin website per your screenshot.
Are you trying to resolve the issue of being unable to download the Mexico maps and subsequently upload to your F5+? Or are you trying to resolve the issue of Mexico maps being included by Garmin in the first place due to the location of your purchase?
Sounds like both may be issues for you but the former calls for Garmin tech support and the latter, if true, I’m not sure if there’s much you can do about it aside from sending in an official feedback/complaint.
Hi – in process of upgrading to a 5X Plus from a 5X – want the better GPS features as i run a lot in tree covered areas – and get drop-outs – which happen less on a friends 5X plus. Two questions. First, is there a reason that there arent any bundles around? When i bought my 3, i got an HRM Run bundle and the 5x with an HRM Tri bundle. I dont see any? I like the strap as i do other workouts 3x a week and it is better for keeping track. Second – i see a lot of demos with the running dynamics pod that goes on the waist – as opposed to the garmin footpod. I know the FP works – but does the waist bound pod work better with the 5x plus? thanks.
My Garmin Fenix 3 has power drop outs with my left sided Stages power meter. Does the Garmin 5 Plus have the same issue with Stages power meters? Thank you!
Lately, I have been using it to link up to a Wattbike with connection to the bike’s sensors proving to be simple. the problem however is I am getting occasion spikes in power, crazy spikes up to 43000 watt, I imagine this is a dodgy reading from the bike itself, but is there any way to have these spikes removed from my data once I’ve uploaded it?
I’m getting exactly the same issue when using my P1 pedals, but only via Garmin. On Sufferfest this morning I connected all my sensors, powermeter via my 4iiii Viiiva etc. Max power in Sufferfest 718w. I also recorded the set with my Fenix5x+ – max power on there of 32,875w.
Riding outside I get the same power spikes – I tried taking the batteries out of my P1 pedals and leaving them for a day or two. But with no change, so I suspect this is a Garmin thing rather than a pedal thing.
That is a known and acknowledged bug with the 6.0 firmware (check the Garmin forums). Upgrading to 6.51beta solves the issue – and didn’t break anything for me.
What are the 3rd party maps that are supported on this device? I am planning a hike around Mont Blanc which includes 3 countries and will like turn by turn features on my watch.
I have to say that was one of the best gear reviews I’ve ever read!!! Really in depth, answered every question… Even after researching these watches for two days myself!
Any links to Canadian websites to purchase this, so I can support your website?
Has the Fenix 5x after the recent updates against the Fenix 5x plus still disadvantages, apart from shorter battery life, music, Garmin Pay, PulseOX and Trendline popularity, particularly concerning GPS, heart rate measurement and map display? In other words, is the Fenix 5X hardware and software not as powerful as the Fenix 5x Plus, despite the latest updates?
I have a number of Garmin devices and recently purchased the Fenix 5 plus. With the 10% discount I purchased the European maps as I thought they might be ‘better’ than the free ones. Well my new watch with over 8 gigs of free space couldn’t fit them. How much space did I need for those?.
So I tried to load them on my Garmin 1030 as I thought that would have space. I then realized that they are locked to 1 device and not to the account. IMO that is just a bad policy I was hoping to use the 1030 while I am on the bike and the Fenix for all other times.
I was able to return the map and Garmin will not be making a sale on any maps. Garmin should lock them to the account and not to the device no way am I spending $100 for two devices for the same map.
So am I missing anything going with the free maps?
I was looking for some information around “virtual partner” (vp). I have a 910 which has vp but is an average not “real time” comparison. Are there any tri watches that allows for a real time comparison of your effort, i.e. I want to know if how my current pace compares to another or standard at any given time. Thank you for all your efforts around your reviews.
PulseOX? I wonder if PulsOX can help me. I have just started to swim, bike, and run after several months of down time just walking due to lung inflammation. We had thought I was OK a few months ago and as soon as I started running I was right back to where I started. A CT Scan is the only indicator and how I feel. I can’t tell until it is too late and I did too much. Anyway I wonder if PulseOX will indicate anything? Can I figure out normal trends for me? When I was really bad my lung test (I don’t know what it is called or measures) came back at 70% normal adult. So maybe I can see something in pulseox before it is so bad I go get a CT scan to confirm what I already know at that point. I really wanted the smaller watch and not black but thinking about buying it just for this feature. If it helps at all it is worth it to me.
Continuously wearable oximetry is pretty new so I doubt there is much of an evidence base yet but I suppose in principle you could establish a baseline. You might get an early warning of deterioration in the same way that athletes get an early warning with an unexpected increase in resting HR. How useful it is is going to depend a lot on the type of lung problem. If an obstructive problem (like asthma and COPD) probably less useful than for rarer conditions such as pulmonary fibrosis where there is a tendency to markedly desaturate with exercise. I hope you do not have the latter.
Thanks very much. They think it is just something I inhaled and will get better. I ordered the device from Amazon and will start testing and comparing with my wife. Still thinking about the fenix 5
Ray, GREAT review, thanks so much for posting this.
I read somewhere online that the 5X+ has an enhanced optical heart rate monitor, vs 5+ and 5S+, providing higher accuracy and more detail. Almost no reviews I’ve found mention anything about it. I’ve had irregular heart rate issues a few times over the years so if the 5X+ does in fact have a better sensor I’d likely go for that one because it should work better with Cardiogram app… otherwise, the 5+ is probably the size I’d want.
Do you know anything about this claim of better HR sensor on the 5X+? Do you have any additional info you could share?
Nah, it’s the same sensor. It’s just that adjacent to it is the PulseOx sensor. Once you get to Marq, those two are more cohesively merged together.
In fact, most would argue that the 5X+ has worse optical HR performance due to its size (larger watches bounce around more due to weight, which strains optical HR performance).
Hi Ray, thanks a lot for all your digging…
If I connect my Stryd as PowerMeter & Footpod it shows “searching” in some IQ data fields (Run Power)
If I connect it only as Footpod it is OK.
How do you connect it ?
What is the difference between the “Fenix 5x Plus Black band/hardware” and the “Fenix 5X Plus titanio DLC”? Is it only the band, or also the watch in made of titanium?
I can live with all user’s experiences. But I own a fenix 5x, and it is, without competition, the worst instrument I have ever owned.
GPS accuracy : tragically bad, on running 0.5km error on 5 km is very common, worse as well. Cycling used to be acceptable, but since a few weeks, i loose 2 to 3 km’s on a 100k ride, routinely. Just a crying shame for such an expensive device.
HR is ridiculously bad, seriously, replacing HR by totally random numbers would not even worsen the “accuracy”. There is no relationship whatsoever to real heartrate, however, wherever I wear it.
Cable to connect to PC is of deplorable quality, keeps connecting/disconnecting continously, big problem to charge device.
Bottomline : over 500€ totally crap product, in my honest opinion.
it’s interesting how long it will last.
My current Fenix 3 dead (turned off for ever) after 3 years of usage. If it has limited lifetime (hardcoded), then maybe it’s not worth that money.
What do you think about that?
Has there been any improvement on the OWS swim capabilities of the 5x+. I asked Garmin about it at the last two Marathon Expos I attended (Boston, Louisville) and in both places they denied there was any sort of problem. One tech rep said there may have been an initial problem that was solved last year. I was trying to decide between the 5x+ and the 945. The 945 looks horrible and cheap so I would prefer the 5x+, but not if it has not been fixed for OWS yet.
Dear Ray,
I need your help, please. I used to have the Fenix 5 Plus, but it broke. Now I’m getting the Sapphire version, but it will have US-maps only. You mentioned that it is possible to get the EU-Maps somewhere else. Can you briefly describe where and how to get the EU maps on the US-watch? I’m confused, as there were several maps synchronized on my old EU-watch (see picture).
.. If you are not willing to publicly tell how to do that, could you describe how to BUY the missing EU maps.. On the garmin page I am totally confused which map(s) i should get to have the same mapping-capabilities as on the EU-watch.
I just purchased a Fenix 5S, I had bought the middle size Fenix 5 and had to return it as it was banging the crap out of my wrist boney prominence and got a burn as well. I thought I would try out the smaller version this time thinking newer model, got the first one last time…they must have ironed out some issue. Again after 2 days of wearing the watch I have a burn on my wrist and continually the HR sensor feels warm (just like last time). I have turned off the hr sensor for now. Contacted Garmin support and it seems to be getting any traction within Garmin product support. I called today was on hold for 30 min, called left call back number and they said they would call back within 30ish min and that was hours ago (no call). Wondering if anybody else has had issues with HR Sensor burn? Google search has a thread within Garmin site and clicking the link it has been deleted. I am not a Garmin hater, actually the exact opposite (6th Garmin running watch, Varia, Edge for biking), I really do like their products… But their product support on the other hand…..
I have been a loyal and active forum user and poster on forums.garmin.com. For years. 600-700 posts until now.
Naive people think that the whole change was about a new forum engine, but having considered that this sort of engine change happened not a long time ago I do deem that it was the most political way to get rid of the fair, but negative feedbacks on Fenix 3/HR and some others.
They have the right to do that, they pay the bill to maintain the forum. But they are so miserable…..
The only problem with that logic: It also gets rid of all the help and positive feedback too.
Garmin doesn’t care about the Fenix 3/3HR. Seriously, nobody there cares about that these days. In the software development world (Garmin or otherwise), 4 years is a lifetime ago.
Hi, I would like to know how the Fenix 5 plus manages the WiFi connection. I would like to know how it turn on and off the connection. In the owner’s manual (link to www8.garmin.com) is not clear if it is possible to turn off the WiFi connection. Does the WiFi connection is always on in background? Is there a way to turn the WiFi connection off?
Just looking at mine (took advantage of the sale to replace my Epix) it looks as if WiFi is usually off and you have to force it to make a connection, because the first thing you see is “Connect to Wi-Fi” and if you choose that it says “Searching for Wi-Fi network”. But you can always go to extremes: Settings->WiFi->My Networks->->Remove. I don’t know what happens when you have “Auto Upload” on (as I do), but it doesn’t seem to be a big battery hit at all. So personally I’m not going to worry about it.
What I don’t understand is when the WiFi is turned off since there is no “turn off” option in the WiFi menu. The owner’s manual states “The device reconnects to this network automatically when it is within range” and this makes me think that if there is some network added to the list of saved networks the WiFi is always on. I don’t know if not adding any WiFi network ensures that the WiFi is always turned off.
In short, I don’t need the WiFi connection and I would like to be sure that the WiFi is always turned off. In case I use the WiFi, I want to turn it on only when I need it and I don’t want the watch always searching for a WiFi network to connect.
Thanks for the overview! I just picked up a Fenix 5 Plus for adventure racing and your breakdown of the various models and their capabilities was the best I’ve seen so far. I’ll definitely refer back to this post for useful tips as I get to know my new device!
Hi Marc – YouTube was actually down yesterday (for large portions of the world), there’s a bunch of news on it. That said, it’s all happy now. Here’s that video again: link to youtube.com
Anyone using fenix 5x still watching this thread? My watch is messing the crank length on my be pro power meter. It is setting it to 208mm making the power measures unreliable. Check your power meter guys and get back to me!
I’m not sure if you covered it or someone else posted it but the 5x plus won’t work with Garmin Express on a Mac. Garmin Connect sees it and allowed me to make changes but when I want to update or install watch faces I must use my Windows box or connect via my Android phone.
Apparently the USB format change to allow Spotify and other new goodies prevent it from working with MAC’s until they make a change. I’m sure that won’t happen for a long time.
A few months with a Fenix 5plus and this really is the most money I’ve ever paid for a totally garbage product. The GPS tracking is so terrible that it’s unusable. The HR sensor is hopeless, too. Bluetooth connection to my phone is capricious, at best.
Here’s a DCR Analyzer set of a backcountry skiing trip I did last weekend. The Fenix is the purple line, the other line is from a Garmin handheld GPS device.
I’ve stuck between a really good priced Fenix 5S or making the £150-200 jump to a Plus. Is the jump really worth the wedge? I see Wifi functionality being a point that concerns me, but would you consider it a real problem considering most people carry their mobile with them or at least nearby?
The other features aren’t really deal breakers for me, so its really whether the wifi functionality is that much of a benefit?
Dear Ray,
I have the Ultegra R8050 Di2 on my bike and the D-Fly-thing. I learned that one could remote control the Garmin Edge-devices via the Shimano (hidden) Buttons and that feature is GENIOUS!
.. But I am using my Fenix 5+ as my bikecomputer and I did not find a way how to remote control my Fenix via the D-Fly setup. Did I miss something or is the Fenix not supported for that feature? Are there any plans to change that?
Ray, is there any possibility to ask Garmin if they could add the Shimano D-Fly-integration to the Fenix 5+, like they did for the Edge-devices? Thank you!
As a solo back packer in areas with very little cellular service I am interested in the Tracking and Safety feature of this watch. before I make a purchase I would like to hearing from people that have used this feature on the 5 plus or have great knowledge to share.
-How many phone numbers can you add to send your location to when this feature is used.
-Can you add a message to the GPS location when it sends it
-How long does it take for the text to be received on the other end.
-Is there a service charge to use this feature
-How many times can it be used in a day/week/year?
– I am looking for something that I can send my camp location to my friends and family daily by using the feature 1 time and then if I have an emergency, I can use the feature 3 times in 5 minutes to let the contacts know that it is urgent and not just my camp location. Will this watch do that?
As a solo back packer in areas with no cellular service I am interested in the tracking/safety features on the Fenix 5plus. How many phone numbers can you enter to send your location text too? Can you add messages to the text or is it just your location? How long does it take for the message to reach its recipient? Is it Satellite based or do you need cell service or cell phone? Is there a service charge to use this feature? How many times can it be used in a day/week/month/year? I am looking for something that I can send my camp location to my friend and family daily and then send the same location 3 times in a row if there is an emergency. Can this watch do that?
Contrary to what you state in the article, Garmin fenix 5 series watches are not the only ones with color maps. There is also the still awesome, but less esthetic, Epix : )
I am trying to choose between 945, 5+, and 5X+. I would prefer the 945 due to lighter weight (coming from Ambit3 Peak but watch only syncs via cable now, drives me crazy; app is still terrible). Have the battery issues been resolved for the 945 and 5+? Ambit3 Peak battery is still outstanding. Any input on battery performance and firmware updates to resolve would be appreciated. Thanks Ray, reviews are superb.
Hi Ray!
Hope all is well.
Yes, the purchasing of maps for different areas is / has been frustrating for me.
I have purchased (and loaded) additional maps for my Garmin Edge in the past with no issue.
I purchased an additional TopoActivity Europe Map for my Fenix 5 Plus and it’s telling me (in Garmin Express) I have no space to install. So now I have purchased additional maps for nothing? Do I seriously need to uninstall North America before traveling to Europe and is this even possible? Any thoughts on how to get both installed?? The watch is new- I can’t have too much installed that it would not allow for the Europe map to be added no?
You don’t need to uninstall the existing maps unless the bits you want to install are too big. In which case, yeah, it’s not ideal.
You could try and install a smaller portion, but I haven’t tried installing the official/paid maps in a few years, since I tend to use the free map option (even on Fenix): link to dcrainmaker.com
Do you think the maps “baked in” to the Fenix 5X are good enough to get me thru hiking the Alps? If not- I don’t see where to install (what folder) on the Fenix 5 the maps I get from the site you referenced. Was hoping to install the TOPO Europe maps I purchased from Garmin but they won’t fit (no room) ——> wish they would have mentioned that before I purchased…… grrrrr.
Hoping maybe I can select the few areas I will hike and install those somehow to the Fenix 5.
Fingers crossed.
Or maybe I don’t even need. I think I will- device purchased in the USA.
Are you using a Mac? If so, Android File Transfer might help a little. It allows you to see and manipulate (you can copy and delete) the file system on your watch, and you could (carefully, since it’s not clear what’s what, so copy everything you delete elsewhere) clear some space for the European maps. It’s really annoying that no Garmin software besides Garmin Express can “see” the watch. Can’t use MapInstall to install pieces of maps or put on third party maps. Can’t use BaseCamp to create routes and drop them onto the watch. (“Garmin” mode almost works but then BaseCamp throws an error while showing my 5+ in the device list and the watch never mounts on the Desktop.)
As for maps, I really doubt that the included maps have anything more than the outlines of countries and possibly major highways for Europe. I bought UK Topo’s from Garmin for a trip next month, which fortunately were only about 1Gb so they easily fit. If this were a normal (non-music) Garmin watch you could simply use MapInstall to install the areas you’re going to but you can’t with the Plus series apparently.
I really need your help here! After saving for a few months, my girlfriend gifted me a Fenix 5 Plus. Prior to that, I had been wearing the Fitbit ionic. Unfortunately, I have had major issues with the accuracy of my Fenix 5 Plus heart rate monitor when doing non-steady state workouts. My issue specifically is with Cardio training exercises I have done where I have noticed that the heart rate, as well as the projected calorie burn, were inaccurate. To confirm my finding, I initially did the same interval workout I have done using my old Fitbit Ionic and saw a major delta in the results. I then did the same workout a few days later and wore my Fitbit Ionic on one hand and my Fenix on the other and saw a delta of at least 20 heartbeats per minute and a calorie difference of 120 calories, with the fenix underreporting. Given that my workout involved exercises such as burpees, and my heart rate on the Fenix, would report a heart rate as low as 75 to 88 bpm, it was clear which watch was accurate. I have been very disappointed as I saw the Fenix as a major technological upgrade from the Fitbit Ionic. I don’t understand how a product like the fitbit ionic that costs $200-$300 less can be so much better here.
Have you had a similar experience? And do you think this is a known issue for Garmin with plans to resolve it (software upgrade within the series, etc.)? I don’t want to return this watch because of its many features, but I am not sure if I can justify keeping it when it is lagging behind its more budget-friendly competitors in the basics.
Just one question – if I use my edge 520 for recording rides (which are then saved to garnim connect) will they sync with the fenix so that all my activities are also on the watch?
To a certain extent. The track itself isn’t sent, just a summary. But it does sync things like VO2max and Training Load and Status. I haven’t used my 5+ today but now that I’ve synced it it knows the basics about the mountain bike ride that I recorded on my Edge 830. It doesn’t have any of the (weird) MTB metrics that the 830 produces (“grit” and “flow”) and it doesn’t have the track or the elevation profile.
It works the other way, too. The 830 knows the basics of the (rare in the summer) activities I recorded with the 5+ and the one ride I recorded recently with my Edge 1000.
With regards to climb pro (I have a 945, but you cover it here so thought it best to ask here)…
It annoys me… I find that when I hit a climb section, the screen defaults back to screen 1, going black to indicate I’m on a climb. It would make sense if it went to the climbpro screen, but it doesn’t. If I’m on the map screen, this is annoying as I now need to scroll back so I dont get lost. It then goes back to screen 1 AGAIN at the end of the climb -more scrolling back for me. I like the idea, and want to see the climbpro screen, but only when I want to go to it manually.
Is there a way around this , or am I stuck with this annoying behaviour ??
In a few weeks I will run a marathon with this watch. Is it possible to insert the desired finishing time and that the watch will monitor/provide feedback whether you are to slow or to fast (and how much)? It is possible to calculate this in your head, but I think my mind will be somewhere else.
My Datarun plus and premium datafields have this functionality as well (I call it required pace). It gets recalculated every second. Als the estimated time of arrival and deviation of a desired finish time are available, they can be calculated based on the average pace or the pace of the last completed lap
I currently own a Forerunner 920 XT and read through the review of the Fenxi 5X an was wondering. I feel like my 920 XT isn’t holding it’s charge like it used to being 5 years old and was wondering if there’s any reason I shouldn’t upgrade to the Fenix 5X. I primary Run and Cycle and am looking into getting power meters for my bike, I’m prepping for a full marathon and want to get into doing Tri sprints.
Be aware that there is a newer generation of Fenix (6) out that have new features link to dcrainmaker.com. But a 5X+ can certainly pair with power meters and do running and swimming and a host of other sports listed above. I have a 5+, and it’s fine for what I use it for (cross country skiing, hiking, other general use). I don’t run, so I can’t say anything about that, and for cycling (road and mountain) I use an Edge 830, although on occasion I bring my 5+ along and it can do almost everything the 830 can do (aside from being easily visible during the ride).
I’m stationed in Japan I saw a 5X Sapphire for $300 so I ordered one, worse case is I willn’t like it. I saw the Fenix 6 but the exchange only carries the Fenix 6 Sapphire, 6S and 6X Sapphire. Convincing the Mrs that I need a $719 is a hard sell, but $300 is much easier.
Wonderful reviews all of them! I am just curious if the 5X works with the mapshare feature by itself or do I absolutely need to get a inReach mini to go with the 5X? I am still on the 3HRD, which I still love, but been very tempted by the newer map features.
Any feed back as per the unit shuts down and not able to turn on for quite a few tries, then it turned on for a few seconds, and kept jumping onto the Set Up Garmin Assist screen, then it shuts down again. Repeatedly.
When the 5S+ sapphire dropped in price to $360/€325 (not included tax/VAT), I had to try it out.
With a week of use I found it to be a bit comfusion with all the options for workouts this watch have. The menus can be a bit confusing, so it takes some time to get used to.
Pros:
+ 5S+ has an excellent design, size and weight for running and swimming and in general for wearing 24/7.
+ Excellent build quality and good screen-to-body ratio.
+ All sorts of activity tracking you could ever want.
+ Full color maps
Cons:
– Limited storage for additional maps
– Battery drain with some 3rd party watch faces/programs
– Better battery life on 5+ and 5X+
– Weak connection to Bluetooth headphones + mediocre music quality with Spotify
Hi Ray
I am in brainfade mode after reading dozens of reviews on the 5 Plus.
Currently I have a Vivoactive 3 which has been fine but am now looking at upgrading and I’m completely torn between the Fenix 5 plus and Vivoactive 4, with current deals the Fenix is only £90 more expensive.
I cycle mainly, road, MTB Gravel and indoor with some running and plan on taking up wild swimming.
Is the newer Vivo 4 a better bet given the age now of the Fenix, despite it still being a current model, or is the Fenix still a better alround fitness device in your opinion?
I would buy the Fenix over it any day. I have the Fenix 5 , 5x plus and 6 in our house and great units. The features for the god and biking will out weigh anything. Full gps and ant+ support
Outstanding review, thank you. It made my decision very easy.
The one problem I have had is the synchronisation with iTunes. It basically crashed and now refuses to work. It just hangs there “Checking Capacity”.
I have spoken to Garmin who have requested and been sent loads of information. They have decided that there will need to be a software upgrade. No idea when that will be.
So I did it the old-fashioned way and just copied-and-pasted. No biggy.
I love the product comparison feature but I’m wondering if you have an index somewhere of what each thing means exactly? There are some that I’m not 100% clear on and find myself going back to the indepth review to try and find the phrase, which isn’t always there. would be super helpful! thanks so much for all you do!
Ray,
Thanks for still replying to these questions. Can you post your run settings? What items do you have set to ON? 3D speed? 3D Climb? Avoidance?
TIA
Hi,
just bought a 5X Plus sapphire and ran into a connectivity issue with my Rotor INspider power meter.
Both, the watch and the power meter support ANT+ and Bluetooth.
The watch paired with the sensor easily, but during an activity, the connection
is down about 50 % of the time. My fenix 3HR, on the other hand, has no
issue to stay connected during an activity.
So I’m wondering if the f5x+ is connecting to the sensor via Bluetooth instead of ANT+.
But how can I chose the type of connection when pairing the sensor?
Or is this a general issue of f5x+?
(BTW, the GPS accuracy seems also worse compared to the f3. Can you confirm this?)
Thanks!
Frank
The Fenix 5 series did/does have some connectivity issues, but rarely with crankset based power meters. I would definitely ensure you’re using ANT+ instead of Bluetooth Smart. If you go into the sensor properties and look at info, it’ll state whether it’s ANT+ or BLE.
For GPS accuracy, I found them to be roughly in the same ballpark. Validate you’re using 1-secording, and play around with enabling GLONASS or disabling it, to see if that changes accuracy. Also, do ensure that you’ve got full satellite signal before starting the activity. Finally, with the Fenix 5 series, many people have found that accuracy of the first workout is bad, but improves substantially on the 2nd workout, as the unit will have fully updated its internal GPS database.
Thanks!
Meanwhile I managed to do both, pairing either via ANT+ or BLE. Unfortunately, in both cases, the connection is up only about 50 % of the time. I then used my old fenix 3hr and the Edge 520 from a friend, both paired via ANT+. I had only a single short drop with the f3hr and none with the Edge during my 1 hour test ride. So it looks like a f5x issue. However, the f5x is also paired with an older (ANT+ only) INpower on my other bike. And in this combination, i.e. f5x-to-INpower, there are no dropouts. So what do you think? Is the INspider or the f5x the troublemaker?
The GPS accuracy still not great after a couple of rides.
On the course in the screenshots (f3hr, top, vs vs f5x+, bottom),
this results in a 10 % difference in total distance!
Is there a way to connect a Zwift FootPod to a Garmin Fenix 5 Plus so I can record my Garmin activity on my watch but also use the Zwift FootPod for Zwift through my Apple TV?
For someone who can’t justify the expense of the fenix 6s pro, would you say it’s ok to go with the 5s plus or would it be too outdated? Or instinct solar (just not a huge fan of the look)?
I can’t speak for your area, but my 5+ certainly has all the trails around me in Central Pennsylvania. I’ve navigated several of them, so they’re probably all routable. The Fenix is Garmin’s outdoor line, so it’s not a surprise that it includes trails.
I’m a former triathlete turned hiker and just upgraded my tri watch to the 5X Plus. Intermittently during a route/coarse I get a vibration & pop up notification with a 2 or 3 digit number as depicted in the photo, What is it and how do I rid myself of it? Thank you!
I swim, bike and run. Then, I come here and write about my adventures. It’s as simple as that. Most of the time. If you’re new around these parts, here’s the long version of my story.
You'll support the site, and get ad-free DCR! Plus, you'll be more awesome. Click above for all the details. Oh, and you can sign-up for the newsletter here!
Here’s how to save!
Wanna save some cash and support the site? These companies help support the site! With Backcountry.com or Competitive Cyclist with either the coupon code DCRAINMAKER for first time users saving 15% on applicable products.
You can also pick-up tons of gear at REI via these links, which is a long-time supporter as well:
Alternatively, for everything else on the planet, simply buy your goods from Amazon via the link below and I get a tiny bit back as an Amazon Associate. No cost to you, easy as pie!
You can use the above link for any Amazon country and it (should) automatically redirect to your local Amazon site.
Want to compare the features of each product, down to the nitty-gritty? No problem, the product comparison data is constantly updated with new products and new features added to old products!
Wanna create comparison chart graphs just like I do for GPS, heart rate, power meters and more? No problem, here's the platform I use - you can too!
Think my written reviews are deep? You should check out my videos. I take things to a whole new level of interactive depth!
Smart Trainers Buyers Guide: Looking at a smart trainer this winter? I cover all the units to buy (and avoid) for indoor training. The good, the bad, and the ugly.
Check out
my weekly podcast - with DesFit, which is packed with both gadget and non-gadget goodness!
Get all your awesome DC Rainmaker gear here!
FAQ’s
I have built an extensive list of my most frequently asked questions. Below are the most popular.
You probably stumbled upon here looking for a review of a sports gadget. If you’re trying to decide which unit to buy – check out my in-depth reviews section. Some reviews are over 60 pages long when printed out, with hundreds of photos! I aim to leave no stone unturned.
I travel a fair bit, both for work and for fun. Here’s a bunch of random trip reports and daily trip-logs that I’ve put together and posted. I’ve sorted it all by world geography, in an attempt to make it easy to figure out where I’ve been.
The most common question I receive outside of the “what’s the best GPS watch for me” variant, are photography-esq based. So in efforts to combat the amount of emails I need to sort through on a daily basis, I’ve complied this “My Photography Gear” post for your curious minds (including drones & action cams!)! It’s a nice break from the day-to-day sports-tech talk, and I hope you get something out of it!
Many readers stumble into my website in search of information on the latest and greatest sports tech products. But at the end of the day, you might just be wondering “What does Ray use when not testing new products?”. So here is the most up to date list of products I like and fit the bill for me and my training needs best! DC Rainmaker 2024 swim, bike, run, and general gear list. But wait, are you a female and feel like these things might not apply to you? If that’s the case (but certainly not saying my choices aren’t good for women), and you just want to see a different gear junkies “picks”, check out The Girl’s Gear Guide too.
Hi! Beautifully thorough work as always, so thank you!
The biggest draw for me are the maps and map related features. Specifically, trail maps here in the Northeastern US.
Is there someplace I can visit online and see the same mapping detail that will be loaded on the 5plus? I’d like to know that the trail systems at my 7 or 8 favorite parks are included in the maps before I take the plunge!
Hi Ray,
a question about the climpPro feature:
is there also a screen for the descent with upcoming descent values?
In my case, it just showed the ClimbPro feature the same way when I went back down the hill. It didn’t seem to show it in reverse. I asked Garmin whether that was a bug or by-design, but didn’t get clarity on that one.
If the routing and maps are the same as the latest on the 1030 (FW5, 2018 maps) then they will be fundamentally broken and won’t route properly, see this post where I try out Garmin popularity routing on one of the most popular cycling roads in the world (Richmond Park in Surrey), and Garmin is the only routing engine that gets the incorrect route (both on Garmin Connect and on the 1030)
link to forums.garmin.com
Also this thread where a user tries automobile routing (includes video) and it shows the 1030 won’t stay on the roads when using the latest maps
link to forums.garmin.com
Somewhere in the complexity of the interface you can switch off “avoidances”. The default is to avoid unpaved roads. Not sure if that helps as I haven’t tried it yet. It is difficult to know how good it as the popularity routing heat maps are not displayed. There are heat maps on Garmin Connect in the route builder but they are pretty immature and miles behind Suunto Movescount or even Strava. Circular route building on Garmin Connect is pretty broken too. Garmin are good at concealing the performance of some features (e.g. nav & GPS performance).
Hi Ray.
Do you know when will CleverTraining UK have availability of Sapphire versions?
Thanks.
Garmin Pay
I used this on my 5X+ 3-4 times now
Works fine but
1. Typing in the PIN is hokey, you are better off with a PIN in decreasing order like 3-2-1-0 cause scrolling is a pain
2. As soon as I used the Garmin Pay, Apple Pay on my phone stopped working- I get “insufficient fare” now when I use Apple Pay- same credit card
3. This morning after ApplePay rejected me – I brought up Garmin Pay – and it let me proceed and charge my train fare WITHOUT ASKING FOR A PIN – Big security fail
Ok – figured out part 3 – no PIN – Garmin Pay stays enabled for 24 hrs or until it can’t detect the HR or you disable HR – ie as late no as it thinks it’s still on you since you typed passcode
I had a Fenix 5X and now just have a 5X+. Both are European versions.
On the Garmin website, it is said that the both units have topo and cycling maps.
On the Fenix 5X I had both, when going in maps selection menu, I could see both and select the one I want to use. There are actuality three maps for Europe TOPO East, TOPO West and Cycling).
But on the 5X+, there are only two maps TOPO East and TOPO West, no cycling map even if the specs on the Garmin website say that there is a cycling map onboard.!
For those who have a 5X+, is that also the case on your device ? Please specify if you have an European or US devices.
Fantastic review!
Any hints from Garmin on when they will refresh the D2 Charlie with the new Fenix 5 Plus hardware?
Just as a general FYI for folks, I finally got around to editing and uploading that mega-unboxing video of the three different editions (5S+/5+/5X+). All of which you can find here: link to youtube.com
Enjoy!
Hello Ray, thanks for all of your efforts, and continued responses to the never-ending questions. And here’s another on for you! I hope it hasn’t already been answered. I’ve read through all of the posts (I think) but I could have missed something.
Anyway, in your conversations with Garmin, have they mentioned whether or not the GPS chip is all-new? Or if it’s the same one as is in the non-plus? If it’s different I’ll definitely give it a try, but if it’s the same, I’ll stick with my 5X.
As info, I’m curious because I’m one of those people that is unhappy with the GPS reliability. I know it’s a YMMV situation, but for me, it’s pretty bad. I regularly walk to work through downtown Seattle, starting at roughly Denny and Aurora (you’re an ex-Seattleite, so I’m sure you know the area) and ending just south of where the Kingdome used to be. It’s a 3.2 mile walk, but my 5X will regularly show it as a 4.5, or some other, longer walk. The other day it didn’t get a lock until I had 1 mile to go, then, when I started the track function, it logged 2 miles. I was pretty impressed with my 8 minute walk times, but…
Anyway, this isn’t intended as a bitch session about a version you aren’t reviewing here, just trying to dig up chipset info. Oh, if you’re interested, I did install the beta 9.71 firmware with Galileo support. It appeared to get a lock faster (still slow), but did nothing for the accuracy.
Cheers
They seem to imply it’s all new in conversations, but they don’t disclose specifics of GPS chipsets. Usually we have to wait for the first GPS chipset update via firmware for someone to find out. I can’t imagine that’ll be long. Usually it happens within a month or so of a new release.
Yeah, walking that route for pretty much any GPS will be tough (assuming you’re roughly going through the downtown core). You might as well just take the transit tunnel instead, probably has cleaner* signal in there. :)
That said, it sounds like you’re starting before you’ve got lock. Which is definitely a deal-killer. It makes everything bad. It takes a bad situation and makes it worse, because it’s trying to find lock in a tough scenario. It’s far better to wait the minute or two extra in high buildings than to try and go and lock. Also, when in bad signal areas (like NYC), I usually wait another 15-20 seconds before starting after lock. Or until my pace screen shows ‘0:00’.
*And by ‘cleaner’, I mean, none.
Hey Ray, how robust is the sapphire glass? I have really good experience with the Polar V800 glass, it survived all accidental hits and impacts over the years and I wonder if the Garmin sapphire is as strong.
I have a Fenix 3 Saphire and I am clumsy.
While the bezel has some marks, the glass is like new.
ON several occasion I hit the glass hard on metal objects and not the smallest scratch or nick.
I have not had any issues with standard and sapphire glass on fenix devices. I am not sure what the material is for the non-sapphire versions but it is incredibly tough and scratch resistant. The big issue for me is that the sapphire glass reflects more light reducing the contrast of the display. Certainly something to consider if you are 45+ yrs. The V800 is much clearer.
I have a big scratch on my Vivoactive 3 glass after about a month. There seem to be very different results on regular glass. Wonder if it is an inconsistency in manufacturing or just luck. I agree the sapphire is very tough. Are the issues with the reduced contrast indoors, outdoors, or both? I am 50+ so do have some issue with the small fonts on the VA3.
Check this out: link to youtube.com
Here is a photo with sapphire left and plastic right which seems clearer to me.
Hi Ray, thank you for your awesome review as always. Could you please elaborate on the real life battery life in activity using GPS and HR? I would love to buy the Fenix 5s but the estimated 11 hours of GPS battery life is not that much for an Ironman race (for many people at least). I read a review where they tested the GPS battery life of the Fenix 5 plus and they said it is actually longer than the Garmin claim and very close to regular Fenix 5. Could it be the same with 5S plus? Thank you very much! Stepan
Hey question regarding garmins wrist based heart rate monitors. Do these still work accurately if you turn the watch around your wrist so it’s on the palm side? I know that tightness and placement is important but not sure how accurate it would be for this method.
Yes, it works. I ride my TT bike with Fenix 5 watch on the inner side of my hand using optical HR.
Ray,
Thanks for doing such a great review !
Have you Swimm while listening to music from the watch? Which headphones?
I think reason it is not called Fenix 6 is simply and purely marketing based. Now they can still keep selling plain 5 that is still current model, and get bonus bucks from plus model. If they went with F6, F5 would instantly became obsolete model in eyes of many.
May be taking the Apple approach for branding. Edge 520 has a plus too.
BTW plain old Fenix 5 got major updates as well last week with beta SW:
– Many small fixes
– Galileo support
– Abnormal hearth rate alerts
– Stryd running power now supported by Dozenrunfield
Last one is big for me at least, because of stupid maximum of two iQ-apps running at any one time. Now I can have Dozenrunfield, Stryd power and battery usage tracker/logger/estimator all running at the same time!
This is merely a connect IQ data field not native Stryd support. Stryd already produce one. Unlike the Stryd Connect IQ app, it does not show your Stryd power zones. If you want power zones you have to use the app. When you use the app you are unable to use workouts or navigate routes. Its a bodge and does not get Garmin off the hook. I suspect their firmware is pretty crammed in (I remember a comment by DC on the Fenix 3) through implementing other features so they think an app can get them off the hook. Same is true for their Garmin Labs app for power.
hello there – i’ll probably be the only one (first one?) raising this but my first run with the Fenix 5 plus showed incredibly inaccurate results. Much worse than the old 5, literally unacceptable. Setting was on GPS + Galilei, running by a river with forest around.
will write to Garmin and send the map for exemplification. Interesting that during the run, the map showed the course properly (running a mapped path) but after the run, the results all over the place.
anybody else with the same experience? thank you,
a.
I have been disappointed with GPS accuracy on my new Fenix 5 plus. I think the problem with modern Garmin watches is the antenna design. We have sacrificed good GPS reception to achieve a round watch with nothing protruding in order to echo some forgotten era of mechanical chronometric excellence. Adding in an additional single frequency set can only do a little if anything.
There is an option in navigation to snap to map routes. This is normal behaviour for car GPS as it generally assumes you are on the road. Might explain the apparent OK real time performance and subsequent poor recorded tracks if this setting is on.
I also note that DC says Garmin store a simplified route with fewer data points and looking at tracks exported from Garmin Connect this is true. What I don’t know is if Garmin also approximates the GPS locations of the points they store so that they are grainy / snap to a grid / are quantised if you get my drift. This might explain why they look so bad close up. Saves space on the server.
Garmin make it pretty hard to objectively compare performance. UltraTrac which some would assert is the equal of FusedTrack but without revealing the route. Popularity routing but without revealing a proper heat map. Cloud storage of approximated GPS routes. Its all snake oil.
This is not the fault of the engineers who I think have done amazing things, particularly with the Connect IQ
SDK. They will know how to produce a good antenna. This must stem from senior managers who have lost customer focus and impose irrational constraints. Ultimately this will be driven by shareholders. This is the stellar lifecycle of many companies, from start up enthusiasm and customer focus to middle aged complacency eventually leading to a general decline as shareholders suck the very life out of the enterprise. They are sucking hard now as they can see what is on the horizon from the up and coming Chinese stellar nursery.
P.S. Did you set to Galileo (Galilei) or just any old Galilei? That might be the root of the problem! (-; Just kidding!
How much heavier is the 5x plus than the 3 hr? If I’m used to the 3 hr no problem, would I notice a significant weight increase?
I’ve had the f3 HR since it first came out. I just got the f5Xplus. I did notice a very slight difference in weight at first when taking off the f3 and putting on the f5Xplus. I’ve been wearing it for a couple of days now and it doesn’t bother me. If your used to the f3HR it shouldn’t bother you, but if your used to smaller watches then maybe it might. I got mine from clevertraining.com. They have a 60 day satisfaction guarantee.
Spotify has a community vote to have support added for Garmin running watches:
link to community.spotify.com
Full link:
link to community.spotify.com
Great review – as always.
Regarding notifications: I can’t find the information anywhere, but will Fenix 5S / 5S Plus show entire text messages (also emojis) or only the first couple of words?
I had Garmin products earlier but am using an Apple Watch S2 at the moment. However, would like to return to the Garmin Connect app as I also is looking into the Edge 130 for my bike.
Just a simple test (no real outdoor conditions)
put my 5x an 5x+ outside with free look to the sky, gps (only), temp sensor connected, tracking enabled and map page as main screen. Device was not moved during runtime.
5x: 14 hrs 15 min, 6,07 km movement
5x+: 29 hrs 40 min, 7,13 km movement
Of course the battery of the 5x is older, but did that test in early owning times of my 5x and didn’t get much more runtime.
link to connect.garmin.com
link to connect.garmin.com
Thank you for your battery test! Could any 5S+ owner test how long can their watch run outside with GPS, please? Thank you very much!
It was a precious test thanks for it.
Btw having seen the total distance of the wobbling positions I always wonder why Garmin did not add the minimum distance as a threshold for GPS trackpoint recording. It is much better than either the smart recording or one sec recording to apply a minimum distance of 3-5 meters. Since in case of good GPS positioning the unit does not collect the unreal small noises as distances.
My thoughts entirely. I am sure some other watches do this as they do not seem to suffer the same inexorable increase in measured distance when stationary.
So far pretty underwhelmed by my new Fenix 5 Plus.
1. Battery life is abysmal. Charged to 100% yesterday. Did a couple of walks and one run. No music. Down to just 15% remaining this evening. This is not much better than an Android smart watch! For me this is an absolute deal breaker.
2. GPS accuracy seems mediocre at best. I did not find that switching on Galileo improved matters. Although the recorded tracks seem just about acceptable the real time positioning is sketchy. Not sure how to explain that. When following a route a really important factor is that the displayed track is stable and in a consistent direction. The route with map was frequently in the wrong direction (up to 90 degrees out) and would jerkily move around as it refreshed the map. Of course there is a map and I can relate the map to the ground and with a bit of thought work out what is going on and where to go but frankly when running a trail I don’t want that complexity.
3. The interface is rather chaotic. I have got used to the F3 despite it being a little irrational. This seems worse. Navigation is now via an App but once I select a route it does not give me a choice on activity type. Interestingly it seemed to default to a run and then randomly applied an unwanted workout that I had recently sent to the device. I now access my Stats via a widget. A rotating wheel menu is accessed via a long press on the light button. The impression is of an old building that over the years has had newer wings added to it in different architectural styles.
4. It crashed on a couple of occasions attempting to stitch together a circular route. The circular routes do not seem to take into account true local heat maps. Not sure what data they are using as they don’t show these on a map. I ran along the river Severn today in Shrewsbury. It tried to take me through an industrial estate rather than along the popular running track through woodland and meadow near the river and canal.
5. Music quality seems worse than on my Polar M600. It has an annoyingly excessive and distorting bass.
On the bright side:
I was happy with the wrist HR which I think works OK (the old sensor on my F3 HR was awful and locked onto my running cadence).
The display is I think a little higher contrast and has a wider viewing angle than the old F3 plus the fonts are bolder and a more standard aspect ratio so clearer.
I suppose there is no market in rationalising, streamlining and perfecting what Garmin have already achieved instead of adding in headline grabbing new features. I think my old 920XT is my favourite Garmin watch and despite being forever hopeful I seem to be invariably disappointed with their newer offerings. The marketing worked on me and I was suckered in. I have now initiated the return process to Cotswold Sports.
I think I will go back to either my Suunto A3 Peak + Polar M430 or FR920XT + Polar M430.
I will keep my fingers crossed that Polar get their finger out and get it right with a V800 successor! (if there is to be one).
Update re: 2 & 4 above.
2. I can switch off the maps for a particular activity such as running. I will see if this improves the stability of the orientation of the displayed track when following a route and whether this also improves battery life.
4. I note that you can switch off “avoidances” in the map settings for an activity such as avoiding unmade routes. I have disabled avoidances and will see if this improves round trip routing.
I found that when doing a cardio workout, the heart rate sensor on my new fenix 5X plus is not very responsive. I compared it to my fenix 3HR and a heart rate strap. The heart barely moves. I’m seriously thinking about returning it. Anyone else experience this problem.
I should have said the heart rate barely increases.
Hi there Ray, as always your reviews are fantastic.
My question is plain and simple and it is if the chipset for the plus version has been changed from the older non plus Fenix 5.
Hey I just would like to know, wheter they changed something on the barometer issue. I did buy a fenix 5 instead of 3 HR in hope of getting accurate barometric measurements. Unfortunately my barometer did not work twice on two fenix 5 models, so I gladly returned it via amazon. As I mostly use the watch for mountaineering, ski touring and trailrunning accurate height and weather information is crucial to me. When they did not change something I will likely change to something from Suunto. Lots of friends have devices from then and even when there is no super hipster direct instagram upload of your daily calorie intake the altimeter works properly even on the cheapest models.
best
sebi
DCR, if you’re talking about Spo2 (oxygen saturation) , I guess you’re, the description on what is normal and what is not is terribly inaccurate. Normal is above 95%. Anyone with spo2 below 80 will suffer brain damage.
quote:”But ultimately, PulseOx gives you a specific value – such as 65% or 80% or 95%. if I’m at sea level and all is well, I could be at 98%. Whereas, if I’m at 10,000ft/3048m, then I could be at 85%. As I climb higher, that value decreases. But there is no specific hard and fast rule on what’s considered safe or not. It’s not as simple as saying 65% is cause for concern for everyone, because in some people it could be 75% or 80%. Whereas another person is 65%. Most climbing outfits will note it’s a blend of having a trained guide look at the numbers given alongside experience diagnosing someone. Still, it can be valuable.”
Hi Dmitry
The normal Sp02 for humans breathing atmospheric air at sea level measured with a medical grade device is 94-98%. Whether anyone suffers long term ill effects (such as neurological damage) for a given level of hypoxia depends on the duration of hypoxia, genetics and the duration and level of acclimation to altitude. The time of useful consciousness for an unacclimated individual at 25,000 ft is less than 4 minutes. At the end of this the median Sp02 is around 60%. This exposure is used routinely in pilots to demonstrate hypoxia (USAF, RAF etc…). I am not aware of any recorded cases of acute neurological damage as a result of this. Sp02 is just one measure of hypoxia. Neurones really only care about pA02 which is not linearly related to Sp02. Climbers on Everest without oxygen typically have Sp02 levels in the 50s. Medical grade pulse oximeters are not licensed for use below 70% saturation are probably not reliable at these levels. Peripheral oximetry is less reliable than central oximetry. Sp02 does not predict the likelihood of Acute Mountain Sickness.
This tech is merely a gimmick. At best it is useless. At worst it might provide false reassurance to a climber and increase the risk of death from AMS. One should respond to symptoms and descend, then descend, then descend again.
I think Garmin are legally exposed by including this sensor. It is, however, a small population and they are a big company so can probably afford to take the hit. It is, after all, another marketing feature. Yay!
link to nhs.uk
link to ncbi.nlm.nih.gov
Climbers are and have been using pulse ox sensors for years in high altitude climbing. This isn’t some mystery area here. Nor is it out of the norm. As I noted in the post, it’s primarily used as a backstop to monitor, not as the end all be all. But it is common.
At sea level? I agree, I’m not seeing the value. But for this specific target, it is actually legit useful to track – certainly more useful than many other metrics. From a legal standpoint, they’re no different than any other FDA approved device (if they do so). Relatively simple really there.
Hi Ray.
FDA approval will be for a device used within constraints and for a particular purpose. I suspect climbing will be outside of those. I agree climbers have used these devices but I am not aware of an evidence base for their use. Custom is not evidence of value. They are just freely and cheaply available. Sats are ill conditioned on the steep part of the oxygen dissociation curve and sensitive to conditions such as activity/stress during measurement. The best monitor of oxaemia is the brain. If you feel ok and act ok you are probably ok. If you don’t then numbers from a sats sensor can only provide a false sense of reassurance. Sats is not partial pressure of 02 in your circulation which is not partial pressure of 02 around a neurone in your brain. Of course I could have got it completely wrong through looking at things through the eyes of a sceptical old man. Do you have any links to peer reviewed publications demonstrating the value of pulse oximetry in climbing?
All the best.
Drew
True on FDA testing, but only because the FDA test for such a device requires the person be seated in a chair (just about strapped in), and that such a chair be indoors, etc… I linked to all that in the review.
But that doesn’t change the fact that climbers have been using these devices for years in other realms, and by and large the results seem to help guide folks. The problem with using the feel OK/act OK/etc is that the brain sucks at deciding what’s OK in high altitude situations. That’s generally why you have others with you to help, and the data is a good backstop of that. Cycling Tips actually did a pretty interesting bit on this a few months back cycling to Everest and talking about some of the challenges there, especially for those not familiar with attitude.
As for research, this* links to a number of studies that talk to certain aspects of the picture. As I noted as well, the paper talks to using others in your group (primarily trained people) to validate that the data your seeing matches the signs your seeing. There are caveats, but it appears to concur there’s certainly value in such devices at high altitude but to essentially use them more for ranges than super precise measurements. Basically, akin to how people use step counters today – focus on the trending and not so much on whether it’s 71% or 73%.
*https://www.researchgate.net/publication/51456662_Pulse_Oximetry_at_High_Altitude
Thanks for the link. I will take a look.
I suppose having continually worn oximetry allows for the collection of data that would not have been possibly simply by taking readings while sitting resting. This would be new and uncharted territory. It would be interesting to relate saturation to power. I guess if your saturation drops too dramatically for a small metabolic effort you have a problem.
All the best
Drew
I currently use a fenix 5s and notice that pace jumps around pretty significantly while running. Seems accurate over the course of a mile, but not so along the way. I was wondering if you have noticed this and if it is any better on the fenix 5s plus. Thanks.
Hi Ray,
Can you tell us what maps are pre-loaded on the Fenix 5X plus ?
Are there only the Topoactive maps (two for European models = Topoactive Europe Eats and Topoactive Europe West) or is there also a separated cycle specific map (a map that can be activated independently of the Topoactive maps) ?
Ray, I’m currently wearing the Fenix 3 and I feel confortable with it, and thinking to switch to either the 5X Plus (same physical size than the 3, but 10gr heavier, and 2mm thicker) or the Titanium 5 Plus (which is considerably lighter). Both have the same retail price, so it is my understanding that the difference will only be the Pulse OX feature.
I’m a marathon runner, and do some swimming. What would you recommend? Is the Pulse feature worth it? or should I go for a smaller size and less weight?
Additional question, for the maps, I live in Mexico, but will buy the watch in the US, do you know if the maps cover Mexico, or will only be for US and Canada?
Another major difference between the 5 Plus and 5X Plus is the shorter battery performance.
I also switched between a Fenix 3 (first version without integrated HR) and a Fenix 5X Plus and there is no real size difference.
What is well different is the glass which is recessed on the Fenix 3 and not on the Fenix 5X Plus, so it was less exposed on the Fenix 3.
Pulse oximetry is not going to be of any value if you are running or swimming near sea level as it will be around 94-98% and unaffected by activity (assuming you have no underlying lung condition). Some mountaineers feel it is of value but the evidence base for this is shaky. I suppose it might be mildly interesting to see a small drop in sats when on an airliner (cabin alt of around 6000-8000 feet at altitude) though the shape of the oxygen-haemoglobin dissociation curve minimises this. It could be useful for pilots where hypoxia is an ever present threat if it were combined with a strong and continuing alert (vibration as a beep would not be heard) (cf storm alerts).
I was wondering if the oximetry (if it makes it’s way into the D2 series) could be used to alert pilots for hypoxia.
Could it also alert pilots that are at risk of CO2 poisoning?
(The other thread in general aviaiton cockpit).
I found this paper:
link to physiology.org
There are tiny (2-4%) reductions with maximal activity so not really of value. Certainly of no use to distance runners. The numbers will not correlate with LTHR or rFTPw which are useful numbers for zonal training.
It could be useful for synchronised swimmers – they get alarmingly low sats during activities while breath holding. A vibrating saturation alert could be useful. The question is does the sensor work when immersed?
Hi Tim
Unfortunately not as the technology essentially “looks” at the pulsating colour difference between oxy-Hb and Hb (People look blue when hypoxic). Pulsation allows for the subtraction of tissue light absorption from the mix. Significantly increased CO2 levels would only produce a small effect indirectly through alterations in the affinity of O2 for Hb.
Now that is some info I can work with!! I’m in the market for a 5x or 5s/x + and wanted to know if it is helping me to have the oximeter. I do running up to 1/2marathons, cycling (mostly ATB), a little swimming, SUP’ing and hiking. Would it be better to go for the 5x or the 5s+? Noting that I already know the oximeter is not a feature I need. Thanks!!
Do you know if Garmin plans on putting the pulse ox info on the app? Right now you can only see it on the watch.
So I know that the sapphire is more scratch resistant, but I’m hearing that the non-sapphire glass actually gives you a brighter and more contrasty display. Can anyone confirm or deny?
I am curious about much more scratch resistant it is. I have sapphire glass on my phone, and it is amazing and pristine after 18 months and many drops. I have a 2 month old Vivoactive 3 with regular glass and I have already scratched it. So I guess I am a good candidate for Sapphire glass. I wonder if the non-sapphire glass with a screen protector is less bright and contrasty?
It’s a big price jump for glass. But if someone has any info on the actual measurable difference in durability, I would love to hear it.
edit missing word. “…curious about HOW much more scratch resistant…”
Hi Anthony. Sapphire is more reflective so makes the lowish contrast display harder to see. Unfortunately the non-sapphire comes with a shiny bezel which also seems to hinder. You could paint it? (-; I have an old F3 with dark bezel and plastic. Its good and there are no marks on the display after some pretty serious use. This plastic is tough! I have an F5+ but to get the black bezel I had to have sapphire which I now regret as my old F3 is much easier to see.
Thanks Andrew! That’s super helpful.
Much appreciated!
Ray, can you comment on the Pips performance of the CPU on the 3 Fenix 5{X,,S}+ ?
There is an app / datafield that you can run to check:
link to forums.garmin.com
I wonder if Garmin is clocking the 5S lower than the 5 lower than the 5X according to the battery capacity.
Thanks!
Great review. I noticed in the menu video that you had the F5+ that was all black wth silver accents. It’s available for ore-order on many sites but with no real ETA. Did Garmin advise to you at all when that model would be available approx?
Anybody looking at actually getting one of these should wait at least 6 months to see what kind of catastrophic defect has slipped through this time, especially at the insane prices Garmin is asking for them.
I agree with @JP. Maybe charging $800 for the watch is the only way for Garmin to collect “insurance” on products that could contain catastrophic bugs and have to be replaced by warranty 2, 3 or 4 times per customer. Also at some point Garmin will run out of people who haven’t been burned by the endless cycle of bad firmware updates introducing so many bugs.
would the map navigation run for say 8 hours and can i download my own routes using for example memory map or similar
I’m liking it so far. I needed a replacement for my Fenix3HR that I gave my son, and the 5X+ is the same size, and the black band is more comfortable than the one on the 3HR. Everything I am using so far is working well (HR, PulseOx, power meter, elevation when biking, etc.). Haven’t done any hiking or climbing with it yet, but I will use it as a second device when I ride the Mt. Evans Hill Climb in a couple weeks (using my Edge 1030 as the primary). I am sure there will be some bugs, but I expect they will be corrected.
Mark
I have the 5X (stainless w/metal band $800) and the 5+ ($1100 titanium). After using apple watches for awhile gotta say these are way overpriced for their build quality and functionality. Both of my watches are brand new but so very glitchy. The new plus model added music and Garmin Pay. Music works if you don’t use any other function at the same time because it will skip and glitch and fast forward and is useless (great if you don’t exercise while listening). I haven’t gotten Garmin Pay to work at all after trying 3 credit cards on their “compatible” list. Yup $1900 well spent. Will try to get a refund and keep searching for a rugged fitness watch that actually works as advertised.
Hi. Have you contacted Garmin support? They are surprisingly helpful lately. Two in three seem to have correct information. (I have been working with them on my Vivoactive3 issues.)
They can trouble shoot whether you have a software corruption or bad hardware. They will replace units that aren’t working properly. And they are actively correcting software bugs. Not always quickly.
Still underwhelmed by my Fenix 5 plus. I have enabled Galileo on run and walk profiles but the GPS performance seems as mediocre as on the Fenix 3. Galileo has not sorted out the issues stemming from poor GPS antenna design in both units. My Polar M430 is miles better. It is around 1/5th the price! I feel cheated. The attached is are tracks from both units. The top is the Fenix 5 plus with Galileo, 1s sampling and recording. The bottom my M430. The track from the latter is spot on correctly showing the side of the road I walked on and points where I had to pull in to let cars by. The Garmin wanders across the road to the wrong side like a drunken man and does not show the track details. It is not possible to export the Garmin track as a gpx and compare in Google Earth. You are also unable to view the track in full screen and the level of zoom is limited. I suspect this is all to conceal the mediocre GPS performance. Some folk might say this is acceptable. At this price I do not think so!
To export a GPX track, on Garmin Connect simply click the little settings widget in upper right corner of activity.
Also, Garmin Connect actually reduces the plot-rate for data points (which I think is stupid because it hurts them in situations like this – rather than helps them).
Thanks Ray. I didn’t even spot that little widget! (60 yr presbyope). Here are overlayed tracks on Google Earth. The Cyan is the F5+, the Magenta the M430. I don’t think plotting more data points would actually do Garmin any favours!
Another plot
And last one showing me walking on the right side of the road (in UK facing oncoming traffic as per our traffic laws) and a couple of places where I had to pull in and wait for an oncoming vehicle (narrow road). The M430 seems extraordinarily good and is well within the GPS standard. I would question whether the F5+ complies?
Have you tried with just GPS on? Not sure Galileo has enough satellites up to add benefit yet….
Hi Greg. Yes. It is off by default. I turned it on because of poor tracks. On my F3 I would have GPS + Glonas + 1s sampling + 1s recording as only then would the track be acceptable to me. I think DC recommends this. There is a hit on battery life but its OK on the F3. I thought the F5+ would have this sorted with Galileo. It seems no better than the F3 and you chomp through battery (I did a 50 minute walk and used around 25%). I can see an analogy between Garmin and VW. Garmin is able to meet performance (cf emission) targets individually but fails in typical use. Battery life with ultratrac. GPS performance (sort of) with GPS plus X + 1s. I think it is a bit of a con.
Yeah, I prefer GLONASS, but in some cases some folks just have more issues with GLONASS than not. When I’m seeing something odd in a certain area I usually try one of the other GPS modes.
Andrew you had different experience than DCR. DCR found that the new gps chipset in the Fenix 5 plus was better than the gps chipset in the Fenix 5 normal, maybe for Galileo or maybe for the chipset itself.
About Galileo, another user, Dom, explained in another thread that we don’t have to wait massive improvement now in open sky because the Fenix 5 normal and Fenix 5 plus have a single frequency chipset, they just use the E1 frequency in Galileo and the L1 frequency in GPS. We should expect that accuracy of Galileo single frequency is about the same of GPS single frequency.
Dom explained that we could see some improvement now in narrow view sky, for example between buildings, because of the greater number of satellites and the better geometry of satellites. If you have time, you could analyze the performance of the Fenix between building and see if there is an improvement using Galileo.
Hopefully we will see a massive improvement in GNSS accuracy using dual frequency Galileo (frequency E1 and frequency E5a). Maybe the Fenix 6 will have a dual frequency chipset in 2019 or 2020, but this is up to Garmin. If a lot of users complain with Garmin about gps accuracy, there are good chances that Garmin will produce in the future a dual frequency sport watch (if it is practically possible, in another words if Garmin can produce a dual frequency antenna that fits the small dimension of the watches and if the power consumption becomes not higher).
Hi Mirko. The accuracy of bog standard single frequency GPS is in my opinion good enough for navigation if implemented well. The Ambits, FR205, FR910 and V800 demonstrate this nicely. The FR205 was my first GPS watch and I successfully navigated downloaded routes by following the Pirates o’ the Caribbean style arrow. For instant pace a foot pod is a more practical solution.
It is interesting to read the blurb from the Garmin website link to buy.garmin.com where it says “…The Forerunner 205 sports a unique design that wraps the GPS antenna around part of the wrist for a better view of the sky, and its high sensitivity GPS receiver provides highly accurate speed and distance data, as well as improved tracking under trees and near tall buildings…”.
Where has the antenna gone in new GPS watches? Dual frequency seems like overkill. Just get back to basics and do the simple things well.
Funny, from your words it seems that while every other component in Garmin watches improved, GPS accuracy actually decreased with the new models. Sometimes I think the same. I have an old Forerunner FR610 of 2011 and sometimes it seems to me that gps accuracy is better than the recent Forerunner FR35 of 2016.
I think that the big difference is that the old FR610 doesn’t have an accelerometer inside and gps tracking relies only on gps data.
In the FR35 I notice that the watch uses also accelerometer data for computing distance and tracking routes and not only gps data. This algorithm sometimes helps, but sometimes gives worse result than gps alone.
Both the watch at the end are very similar, but sometimes both have big errors (due to building or mountain) in different moments. It would be nice if it would be possible to avoid these big errors. I notice this because for the most part of the run the watches give the same time for km, and beep at the end of the km about in the same moment, but in a few km the difference between the two watches becomes 10 or 15 seconds in a km. With gps watches I would be happy if big errors become less and less. Difference in time of 2 or 3 seconds every km is acceptable for me. I think that big errors depend on mountains, building, and sometimes perhaps gps watches have their bad day like we human being.
Hi there,
Thanks for a great review – as always!
The Clever Training discount code for the UK site doesn’t seem to work, I’m not sure if there’s a typo in your text or if the codes hasn’t been activated yet.
Regards,
Gustav
The other DCR discount code (DCR10BTF) works fine on the clever training UK site. But after waiting a week with no replies to my emails to their support team, I cancelled my order and went with a local retailer (LBS), for slightly more money, but fat better responsiveness and support should anything go wrong.
Hi Gary-
Sorry to hear that. I checked with the CT UK folks (as I always do when folks say they have issues) and they noted that in your case they checked and it looks like they were on top of things pretty quickly (far less than a week) based on the dates they sent and when you e-mailed and ultimately cancelled the order.
Cheers.
If anyone is having problems accessing the storage on the F5+ on a Mac (it doesn’t register as a removable device) I have found a workaround. If you set the USB to media transfer mode it seems to use an android file transfer protocol. If you install Android File Transfer app you will be able to access the drive and its directories (I found this a useful workaround for sideloading apps under development for testing).
P.S. I note that the Amazfit Stratos is also an Android Wear device under the hood but has OKish (several days) battery life, presumably because of its transflective display.
You can also hack it and add Android Wear apps! link to youtube.com
I wonder how much power is used by the OS and how much by the display in Android Wear devices? The M600 had great potential but was flawed by battery life, I presume in part because of Its LCD display. A modified Android Wear OS with reduced power consumption combined with a transflective display could provide a great base for a sports watch.
I wonder what Polar are doing with the V800 successor? (-;
keep your eyes on this site, no idea when they (polar) will add content, link to polarvantage.com
how do you eject the watch properly on mac?
OK. I got fed up with the F5+ and used my F3 (with Stryd for power) and my Polar M430 for phased interval training. My intervals involve running up and down the same flat route which is ideal for looking at GPS consistency. I have overlaid the F3 track (GPS+Glonas, 1s, 1s) with that from the M430. I think the eye can pretty much do the stats on this. F3 in cyan, the 430 in magenta.
Complimenti per le recensioni
Constant issues with pairing headphones. Have to un-pair and repair all the time to get them connected. Also get error messages trying to download music. Not to mention other bugs and GPS issues. $850, really Garmin. Give me a freakin break.
I have the 5X Plus and am having a problem with navigation. The last series (5X and Tactix Charlie) allowed the user to upload selected Open Street Maps via Garmin Map Manager and Garmin Map Install. You could plan routes in Basecamp and then send them to the device (or download device generated routes–tracks–back to Basecamp). Not only does the 5X Plus NOT appear as a “drive” or device in the Mac finder, but it is also not compatible (apparently) with Basecamp. Furthermore, although Map Install shows it successfully transmitted the OSM topo map to the watch, that map does not show up under any of the “Configure Maps” in the various activities. Has Garmin actually shut the new devices off from both Basecamp AND Open Street Maps? If so, that is a big loss in utility in terms of planning trips (in my case, hikes or dirt bike routes).
Hi Ben. See my post #603 for a work around. If you select USB mode MTP and install Android File Transfer (you may have to install Android Studio to get this) you will have access to the drive directories in the app. You can then paste a new gpx route into the directory garmin/newfiles and it will convert to ant and load into routes on the device.
P.S. you have to close Garmin Express to run AFT, I presume because they share the same Android protocol.
Thanks Andrew. I use the Mac system, but I do already have the watch set to USB and MTP. I’ll call Garmin during the work week and see what they say.
Hi Ben. I think thats the issue. I use a Mac too. Garmin has gone Android. Macs don’t recognise Android devices as removable storage *natively* (which is odd as OSX and Android are Linux like) whereas I believe Windows does. You need to install the Android File Transfer app and launch it to gain access (after ensuring that Garmin Express in not running). I do not believe Garmin will be able to help you without a firmware rewrite!
link to android.com
Did not work for me.
I found this on the Garmin support website under fenix 5X Plus, selecting “OTHER” for topic and MAC as the keyword.
“My Mac Does Not Recognize fenix 5 Plus When Connected via USB”
“Unlike previous generation fenix devices, the fenix 5S Plus, fenix 5 Plus and fenix 5X Plus use the MTP (Media Transfer Protocol) mode when connecting to a computer. This USB mode allows for the transfer of media files to the watch. Mac operating systems (OS X, macOS Sierra, and macOS High Sierra) only provide limited native support for MTP devices, which means these watches will not be recognized as external drives. For additional assistance on transferring music and other audio content to your watch, please see related content.”
You have to make sure Garmin Express does not launch automatically when you connect the watch. Disable in its settings. If it has connected, even once, if you then close down Garmin Express, the USB connection is permanently denied to Android. You then have to unplug and plug back in. (and Garmin Express needs not to start again or you are back to square one). Good design hey?
Here is a screen shot.
Just been for a forest hike with my F5+ and M430. F5+ 1s samp and rec, no Glonas or Galileo. 3.72 miles recorded on the M430. 3.89 on the F5+. 3.71 miles shown on identical route drawn in Garmin Connect. Although the GPS track is generally OKish on the F5+ (ignoring the fact that the data is seriously reduced before storing in Garmin Connect therefore jerky straight lines) there are occasional blips where it creates bizarre loops (at least three on this route) see examples below. This must have added distance to the route. Is anyone else seeing such odd behaviour?
another smaller loop
This is my personal opinion. I think that the algorithm of the Garmin watch introduce voluntarily these loops, when the gps data show a distance and the internal accelerometer gives another distance. When the algorithm believes that the distance of the accelerometer is more correct of the distance of the gps data (in other words when the algorithm thinks that the data of gps are not so correct) it modifies a little bit the track with a loop, so the distance becomes a little bigger. When you export the data in garmin correct or in other programs, the track seems a little weird but in this way the garmin watch gives the distance that it thinks is the more correct examining the gps data and the data of the internal accelerometer. This is just my opinion and maybe I’m wrong. I think this because my old Garmin FR610 didn’t have an accelerometer and it never gave me this loops in the track. My newer Garmin FR35 has an internal accelerometer and sometimes it gives me the loops in the tracks. When I do long runs I usually trust more for distance and pace the FR35 than the FR610, because usually the FR610 is quite accurate, but in some difficult points where gps reception is bad it gives big errors. The FR35 gives not so big errors and not because the gps receiver is better, but because when gps data have big errors the accelerometer can help recovering the correct distance. I repeat this is just my opinion and I may be wrong.
Whatever the reason, the GPS performance is simply not good enough. The M430 has only average GPS performance but seems much better than both my Fenix 5 plus and the older Fenix 3. I am after all not comparing it to my Suunto A3 peak or Polar V800. I expected so much more in a watch at this price point. I bought into the Galileo hype but have now got just another crappy Fenix GPS. I have just emailed Garmin support asking them to provide a solution, replace or refund. I await the response. It is surprising that my experience is so dissimilar to DC’s. It begs the question was his, or is mine, representative?
Did a test yesterday, GPS, GPS + Glonass, and GPS + Galileo. Got the best results from GPS + Galileo, however not that great or consistent. I am very disappointed in this watch (fenix 5X Plus). I also noticed the sleep tracking to be off. Also bluetooth connectivity issues, drops connection from phone. Once I turn off headphones, the only way to reconnect them is to remove and repair them. Then they crippled it on the Mac. Can’t believe how poorly it performs given the extremely high price.I bought mine from Clevertraining.com. They have a 60 day satisfaction guarantee. I may return it and go back to my fenix 3HR. Just sent a second email to Garmin. They seemed to either have ignored the first one I sent almost a week ago, or are inundated with complaints. I’m guessing they made sure the test watch they sent DCR was vetted for bugs before they sent it to him because consumers are not having the same experience. Very disappointed with Garmin. What are they thinking.
Andrew, that’s disappointing, but not surprising. I had many issues with my f5, so like many others, I went to the 935 and haven’t looked back. I’ve been waiting to see if the plus solves the gos issues, but based on the forums so far, it’s mixed at best. Have you tried the 935 compared to the others you mention above?
And DC, have you officially moved onto the plus as your everyday watch vs the 935.
Here is a better view of the tracks from my M430 and F5+ on a recent hike. F5+ in magenta, M430 in cyan as usual. I did not realise Garmin pruned the data so much when exporting to KML. Better to export as GPS then import into Google Earth. The problem is not so much positional accuracy in the F5+ as positional inconsistency and loops introducing extra distance. To me this suggests an algorithmic problem or bug rather than a pure hardware issue. Mirko alluded to this. This device is not of merchantable quality as it stands. Not sure how DC got so badly burned with this one?
If you see the run of Ray in the French Alps in Chamonix (I attach a screenshot of DCRAnalyzer) you can see in some points some loops. The loops of the run of Ray are indeed small and not worth of notice (the map where I took the screenshot has a scale of 5 meter, as you can see in the ruler). In your screenshots, Andrew, I can’t see a ruler so I don’t know what is the scale of the map. But it seems to me that your loops are a lot bigger than the loops of Ray, so they seem to be big errors of GPS (the big errors that I wish that a dual frequency Galileo watch could avoid, me too from time to time suffer with my Garmin watches of big gps errors).
It seems to me that till now in this comments 50% of users noticed an improvement of Fenix5 plus gnss tracking in comparison with Fenix 5 normal, 50% think that there are no improvement.
Hi Eugene
Thanks for the advice but I am no longer interested in owning any new Garmin products. I certainly don’t want to boost their profits by buying a device because another of their devices doesn’t work properly. Bitten twice forever shy!
Waiting for the V800 successor in the Fall.
I’ve moved onto the 5+ as my day to day watch (the 5+, not the 5S+ or 5X+).
One minor thing to note is that when looking at my Chamonix files, be sure you’re looking at the notes on which devices were worn on the wrist versus the backpack (given I had a pile of them, they all couldn’t fit on my wrist). In those cases, Day 1 of the Chamonix stuff was Fenix 5X+ on my wrist, other units on backpack. Whereas Day 2 was Fenix 5X+ on wrist for way up, and I believe on way down it was 5S+ on wrist and rest on backpack (can dig up my notes).
As Mirko noted though, whatever loops are on that one route are barely visible and not seen on most other routes
Finally, I’d be super careful when looking at another than the original .FIT file (which is how I compare). Anything else might be funky/non-representative. Especially because Garmin sends the original .FIT file to 3rd party platforms for sync.
Either way Andrew – not sure why you’re seeing what you’re seeing. :-/
How is this for scale. I switched on Glonas but it didn’t help. On this long run I passed a rock, went back, sat on it, got rid of a stone from my shoe, then carried on. The F5+ freaked out. This is not a GPS issue. This is algorithmic / a bug. They need to stop trying to do clever stuff with accelerometers as they clearly don’t have the expertise. I also wonder if the data points are correctly time stamped. Do they fully understand the characteristics of the GPS chipset they are currently using?
Because I haven’t quite followed this entire thing – have you tried contacting support about getting a unit swapped out? Perhaps there’s just something mechanically wrong with yours. Obviously simply sitting somewhere for a few seconds shouldn’t show that.
Hi Ray, My comment is near the top of this chain. I did see that Garmin introduced an update to Map Install 2 days ago. I was finally able to install OSM on the 5X Plus (although, unlike 5X and Tactix Charlie, the OSM map does not show up on the list under Configure Maps-even though I think it is actually there). I’ve had similar issues as others have regarding music dropping out after 20-30 minutes (have to reconnect with the headphones; or even delete and re-pair with them) and sometimes erratic GPS maps–looks similar to what the InReach does, drawing straight lines at odd angles. The music thing and the GPS thing are minor, I think, and likely to improve, but the disabling of the Basecamp connection for Macs IS a big deal to me. That’s one way (in addition to My Google Maps and a file translator) I used to plan my routes. It’s even more frustrating to me because I briefly had the Tactix Charlie which DID allow me to upload routes from my Mac to the watch. I hope to speak with Garmin customer service when they open this Monday. By the way, my MacBook Pro does not let me click on the subscription or support DCR or Notify Me boxes I’m running the latest OS High Sierra).
That doesn’t look like anything clever to do with accelerometers. That just looks like random walk. Since so far as I know Garmin doesn’t take any preventative measures with their watches (they do with the Edge), you’re just seeing GPS noise. I don’t know how wide that lane is (here in the US, lane width is typically 8 ft/ 2.5 m) but GPS error is typically 2 – 3 m. So it all looks reasonable. If they were doing something clever with accelerometers, it probably wouldn’t show that track.
If you want to verify, take your watch outside, put it down somewhere, and start recording an activity. You’ll see a track similar to what you see when you stopped this time. There are lots of threads on the Garmin forums discussing this and seeing who got the greatest recorded distance when the watch was sitting still.
Ben, are you using an ad blocker? Problems like that with Safari can be caused by third party software interfering with Safari. Turn your ad blocker off for this site.
Hi Ray.
Yes thanks. Waiting for a response from Garmin.
Someone suggested better to export as FIT because the GPX export is not as reliable. I did and overlaid on top of the GPX export from Connect IQ. See below. One is half the render width of the other. The tramline appearance of a narrow track on a broader track show that the data points are (to all intents and purposes) identical. The GPS performance (with Glonass) is unequivocally crap just as it was with just GPS or GPS+Galileo.
I hope you are right and this is a problem with my device. Some of the other comments on here however suggest this is not an isolated problem.
P.S. Apologies. Google Earth is buggy too hence the alpha value is clearly less than 1 despite me setting it to one for each track so it looks a little washed out.
P.P.S. Could the Google Van behind me have messed up the GPS signal? (-;
Maybe so but what a dumb algorithm. If so the resulting distance measured is so way out and not acceptable. The M430 doesn’t seem to suffer the same issue (even though it is not an exemplar of GPS excellence). It would be pretty easy to model a runner as a physical system, constrained by real world maximum acceleration and velocity (best sprinter) and apply a “force” to it related to the distance to the next measured GPS location. Add critical damping in to the model and you have a decent filter that would overcome the GPS random walk issue (as many of the random position variations are physically impossible for a human physical system). Perhaps that is what Polar do as although they do not seem to have significantly greater positional accuracy but their track is not as bonkers as Garmin’s and the distance measurement more reliable. Although Garmin has a larger number of programmers than other companies I do question how competent they are. Great software often results from small teams of highly committed and skilful programmers supported by IT savvy management.
P.S. reply to Paul S
Hi Andrew,
I am seeing quite the same behaviour. I was totally unacceptable during my first test when walking slowly with my daughter. I don’t have the map, I hated it so much I have deleted the activity :-). It was better on my second and third test when on boat or bike, but only when there is perfect view of the sky. Once there are buildings (not very tall), or bridge above, it goes crazy. But I have checked a couple of older rides with 5 (original) and 3 (no HR) it seems quite the same. Here are few examples I quickly did for you and others.
David
There are some more issues I have experienced so far with 5plus, during my first few days of testing & playing with it:
1) Battery life is far worse than 5 (original). Many people share the issue:
link to forums.garmin.com
2) Connection with phone drops from time to time, and you have to restart watch or phone (iOS) or both to reconnect.
3) Notifications from phone (iOS) only sometime get to watch. But I may have seen the same issue with my Fenix 3 and 5 (original). Not sure – I stopped to care after a while.
4) Various issues with Navigating on watch. For example it gets stuck on “Calculating…” sometime, and when you try to cancel by “Stop Navigation” and go to another app even without trying to navigate again, the “Calculating…” message is still there. Or it restarts itself when trying to calculate route.
5) Garmin connect on iOS has ghost menu items to manage apps. It has “Activities & Apps”, “Activities, Apps & More” and “Appearance” all allowing to install some combination of Apps, Widgets, Data Fields and Watchfaces :-). Fenix 3 and 5 had more polished management screen.
Honestly I think these are all issues which will be eventually resolved by software updates. If so, the only one thing makes this watch far worse than Fenix 3 or 5 is that the edges around screws are sharp(er). It means cuddling with the watch is not that pleasant, and drying it with towel after washing feels just bad :-D.
Have a nice day!
Hi Ray
My partner now tells me I had a temporal lobe seizure. Ran along the wall, jumped off and started break dancing before carrying on down the road. I have sent the watch back as I don’t want this to happen again. (-;
Ah, but does Garmin use accelerometers or a filtering algorithm to improve the track when moving to overcome their patented but poor exo antenna design? If not it is hard to explain the reduced size of the random walk when moving.
“…So it all looks reasonable…”. I disagree that this is reasonable.
I sat on one of the rocks visible at the lower left corner of the image. A standard car width in the UK is 1.8m. There is a van in the image, so probably around 2m in width. You can see the spread of values which vertically exceed 10m, so not meeting the minimum GPS standard when stationary. The conditions were not particularly challenging – a coastal run – flat.
Such a gross random walk at low speed or when stationary wrecks the accuracy of the distance measurement. I believe it reveals the underlying poor GPS performance. GPS was an issue in the F3. I am amazed that Garmin have not responded to these criticisms. Quite the contrary. The F5+ is worse!
Response to Paul S.
Hi Andrew,
I read all of your posts and they confirmed my strategy. One can wear a member of Fenix family and use it, but he needs also a non-smart Garmin with better GPS accuracy and can merge the data afterwards.
I forgot to add that or a non-Garmin watch, certainly.
I am not familiar with Polar and Suunto watches, but I bet that even their products have lost some their GPS accuracy on the road of becoming smart.
Andrew, you’re sitting with the watch where? Next to your body? You know that your body can attenuate GPS signals just like trees/leaves/buildings/etc. can? As for when you start moving again, you’ve removed the mean motion so you can look at the GPS residuals farther up the track? Or are you just basing your judgement on the fact that it “looks” straight? And there is no “minimum GPS standard”; 2-3 meters is about the best it gets with consumer GPS. It can be much worse.
Garmin doesn’t seem to use the accelerometer at all in determining the track. (Or else why would the let it random walk when you’re stopped, which is pretty silly?) The only thing I know that they use it for is “dead reckoning” when the GPS signal is lost, like in a tunnel. (And I suspect that it’d be easy to fool it then.) Other that tunnels I’ve never seen any evidence that Garmin uses the accelerometer for anything other than things like “step counting”. If you’ve ever used a Garmin device that records accelerometer output, like the VIRBs, and looked at the record you’d see the reason why. There’s plenty of noise in the accelerometer signal.
Garmin Europe are going to look into this for me. I await their thoughts with interest.
Hi Anthony
I posted these on DC Rainmaker.
link to dcrainmaker.com
#621
#627
#631
Looking at other posts on the same DC Rainmaker page I don’t think this is an isolated problem:
#664
#665
#675
All the best
Drew
On 27 Jul 2018, at 12:58, product.support@garmin.com wrote:
Dear Andrew,
Please can you provide a photo and some activtity links so we can look into this issue for you.
Once we have this i can look to resolve this issue for you
Kind regards,
Anthony
Garmin Europe
To Paul S.
You are looking at one post in isolation. Look at the others which show the same problem. My watch was worn on the left wrist. My body is always in the way of some part of the sky. To suggest that in all these cases it is because my body is in the way of a satellite (presumably where only three were initially visible) is I think absurd.
You are wrong that there is not a standard. Domestic GPS should locate to within 10m to meet the minimum standard. link to gps.gov
As to your last point. I agree it would be pretty silly to stop using accelerometer data when stationary. Unfortunately this appears to be the case. Perhaps there is an issue with the algorithm so that it ignores (Ax, Ay, Az) values if (0,0,0) which of course is daft. I have known programmers do more foolish things (just look at the A400M). Of course this is mere speculation.
The bottom line is that the GPS performance is not good enough.
Injured and doing a lot of pool running right now. Thought I could wear headphones and listen to some music. Once the watch goes underwater it cuts off. To be expected when I think about it, just thought I’d let other injured runners know!
Thanks for all your great reviews! One question on the Fenix 5 Plus. I see that it has bluetooth connectivity. Will the HR monitor on the watch communicate to my Wahoo Element Bolt bike unit so I can see the HR right on the Wahoo Bolt? My Mio Alpha 2 works that way, but I wasn’t sure if the communication on the Fenix Plus would work with the Wahoo Element Bolt in the same fashion.
So you can’t swim and listen to music?
You might be able to if you were to swim one handed keeping the watch close (a few cm only) to the receiver on your waterproof BT earbuds (which I doubt exist for obvious reasons). You can get combined waterproof earbuds with an MP3 player for around £10 on Amazon.
Sorry, they have gone up. You could try eBay. link to amazon.co.uk
I am looking for a watch to replace my old running watch (tomtom spark) and my garmin edge 1000.
It must be my every day watch.
Do you advice a 5 plus (not x) or a 5x (not plus).
They both have navigation and maps.
Hi Maurice
Neither!
Keep your Edge and get an old Fenix 3 without optical HR (as it sucks) and without sapphire (as it sucks). It looks quite nice with a dark grey bezel and customisable faces as a dress watch. The Fenix 3 has mediocre GPS performance but accuracy is just about acceptable with Glonass. The 5 and 5 plus are are worse. The 5 has sensor connection issues. They both have poor GPS antenna design and are confused in anything other than ideal GPS reception conditions. Firmware updates are not going to sort these problems out! Have a look at the forums.
Is the a 5P+ (aka 935+)?
Hi can i use the heart rate from the fenix 5 plus to show on my garmin 1030. Can you guide me if this is possible?
Yup. You have two basic options:
1) Broadcasting while not in an activity (don’t recommend)
2) Broadcasting in an activity (recommend)
I prefer the second because the first totally blocks your screen in that mode. Whereas the second just broadcasts while recording an activity (which you can then discard if you really want).
To enable:
1) Hold middle button to menu, then settings
2) Sensors & Accessories
3) Wrist Heart Rate
4) Broadcast During Activity = On (lowest option)
(Alternatively, you can do the other method in that same menu, which is to just ‘Broadcast heart rate’ right now…but as noted, that blocks the screen. There’s also faster ways to get to that option too.)
Then on your Edge 1030, simply search for a new heart rate sensor. Remember to have started an activity though on your Fenix 5+ when you search for pairing, else it won’t show up yet.
Finally, keep in mind that in general I don’t get great results from cycling with the Fenix 5+ (or any Garmin watch). I find it works best in steady-state riding (like triathlon training), but less awesome for sprints/city riding/etc….
Enjoy!
Update regarding Mac users: The MTP issue has apparently been resolved, as far as route planning with Basecamp is concerned. Both Map Install and Basecamp have been updated. Basecamp (ver. 4.7.0) DOES now “see” the Fenix 5X Plus, and is able to send and receive data.
Hi Ben.
Maybe so but you are then restricted to the archaic turd of a program Basecamp (and you have to pay for maps that are free anywhere else!). My workaround allows Mac users to upload their GPX files created using whatever they like. I tend to use Movescount because it has proper heatmaps (C.F. popularity routing which seems broken in the UK). Also anyone developing for Connect IQ on a map will need to have access to the removable storage to “sideload” apps for testing on a device. This unadvertised change by Garmin is quite rude to Mac users.
I have sent my F5+ back as for me it has no significant advantage over my old F3. It feels good to have offloaded the thing.
See #614 and #617.
Battery hangs until reboot – just wanted to add to the others in terms of bug data points
For me, the most important is the accuracy of the GPS, which smartwatch will be more accurate fenix 5 plus or suunto 9?
I don’t care for titanium band is the extra money worth it for a titanium bezel only? Or is the titanium band far better than the other bands. I’m deciding if i want to upgrade from my 5x to the plus or not…
I have to say, after a few weeks of running with the 5X plus – I am completely nonplussed with the GPS performance
I expect any GPS to have trouble in the canyons of the big city, but the 5X plus has the absolute worst track of any watch I’ve had in the last few years in downtown Chicago
Beyond that, along the lakefront, which is basically open and flat, the last 2 runs have shown me skipping off into the lake
It should be a simple programming exercise to avoid non humanly possible tracks based on speed or walking across open water
Funny thing is, it was ok and slightly better than the 5X on the first run when I tested them head to head – before the first Garmin software update
Also – I was GPS locked/ green at the start of my runs and using GOS +Glonass yesterday and GOS +Galileo prior to that
Here’s a track from Sunday w GPS+ Galileo
And another from yesterday w GPS +Glonass
Have you tried with *just* GPS Marc?
not yet – I can try that but it’s kind of ridiculous – on the software side, using Galileo or Glonass in addition to GPS should only improve the track, never make it worse, the API usually has a confidence measure of each data point, if either Galileo or Glonass decreases accuracy – why is it there in the first place ?
Hello, I usually have ferropenic anemy. May I control my progress with the oxymeter of Fenix 5X plus? Thanks in advance
No.
Oxygen saturation is not related to how much Hemoglobin you have. You can have 97% SpO2 of 14 g/dl or 97% of 8,0 g/dl Haemoglobin. It is the SATURATION of the hemoblobin you have. For the amount you have to perform a cell blood count. I’m sorry!
Alessandro
M.D.
I’m a marathoner and train daily, 70-90 miles a week most weeks and I also like reviewing my runs in connect.
DC – is there much value in upgrading from a 945M to a Fenix Plus 5? Other than casual bike rides with the kids, I’m using for running only. My 645M arrives from Garmin this week. Wondering if I should spend the extra to trade up.
I don’t need maps, but Galileo accuracy sounds great and I’m wondering if the 645 screen might be too small for my 50 year old eyes vs my failing 630 with a perfect size screen for me.
Hi Ken – Personally, if you’re using just the FR645M for running, and are good with the physical aspects of it (appearance/weight/etc…), then I’d probably stick with it. Also, the FR645M is set to get Galileo as well via software.
Hi Ken,
Just wanted to jump in here and say my training needs are similar to yours and I have the 645M and have been very happy with it.
Ken – The one downside to the 645M is the battery life, especially compared to something like the 935. I’m running 50-60 miles/week currently and am charging it every few days. I tend to put it on the charger when I shower just to keep it topped off.
Thanks guys. I opted for the Fenix but appreciate the advice. I reviewed Ray’s reviews extensively and I think given my heavy use, the longer battery life of the Fenix plus will be a nice benefit. In addition, I plan to use with my Jabra 65T elite headphones. They are the best running headphones I’ve ever owned (and I’ve owned many), but the receiver is on the right ear and I wear my watch on the left. Ray speaks to the improvements in the Fenix for Bluetooth connections, and in Garmin forums it looks like my Jabras do OK with the Fenix, but struggle with the 645M. Like many, I’m a little disappointed with the price premium for the Fenix and I suspect Garmin will need to address that in the medium term, but nothing I can do about that at the moment! In Canada they even charge a $150 premium for the sapphire version (which I’m going to select), as I’ve scratched up my 620 and 630 in the past and was always put off by the little nicks – but $150 for that is a pure profit grab. Ah well – no one ‘needs’ a Fenix, and as Ray alluded there are other very good choices out there at much fairer prices.
Thanks again for the feedback, and Ray – keep up the awesome work!
I bought a Fenisx 5X Plus relying on Ray tests, but we must not have the same watch. GPS accurracy is horrible !!!, not usable even !! OX sensor is giving me results below 80%.
I am trusting your reviews from a long time but I can’t understand how while using this watch for 2 months you didn’t detect all these issues related in all these posts…
I should have been waiting more time to have reliable feedbacks from different users.
Thanks Andrew for confirming me that I am not crazy. I wrote emails to Garmin, for them everything is ok…
I spent 849 Euros for a piece of shit and I will not be able to be refunded…
My trace with 5X plus, with Ambit 2 it is perfect.
When viewing satellite images of tracks, you should always view top-down, as viewing from an angle will skew things. Also – do you have an example of that same track with the Ambit2? That seems like quite a few high-rise buildings around it. May be worthwhile to try the various GPS modes (GPS-only, GPS+Glonass, GPS+Galileo)
Finally – what retailer doesn’t let you return a watch within 30 days? The watch has only been announced 37 days, and given you just posted I presume you just got it (and didn’t wait 31 days to post).
Yes, here is my trace with Ambit 2 (bought in 2013).
I bought my Fenix 5Xplus 10 days ago but when I called they said they will change it but I didin’t ask for being refunded. I can’t imagine the vendor will accept or maybe he will give me a coupon but not a refund. I will try.
I don’t understandhow the y can release a so bad watch whereas the Fenix 5X looks pretty accurate.
That’s an impressive track for any GPS, about as good as I’ve ever seen on a track by any unit on the market, even ignoring all the buildings around it.
As for a refund, I’m not aware of any retailer in any county in Europe or North America that won’t issue a refund under 30 days for pretty much any reason you want. Perhaps in some regions outside of that, but 30-day return policies are the norm.
My retailer is Lepape in Paris, when I brought my watch they refused to refund me. They gave me a coupon since the watch was not available and they told me 2 weeks ago that they will provide me a new one at the end of august. I bouhgt it on July 12nd, I sent it back 10 days later and I have no watch and they don’t want to refund me. :(
Heads up. Just purchased (25 July 2018) Fenix 5X Plus Titanium DLC with Titanium band for a little over $400 off regular price. Not sure what’s going on or if it’s an error. They also had deals for Fenix 5 plus and leather bands.
Thanks, placed an order for teh D2 Delta PX, $437 off.
Let’s hope Garmin honors teh orders
Discount on the Leather band is only given when ordering with a watch.
I placed the watch order and then went back to order a leather band, but it has no discount :-(
If anyone orders a watch, please throw in a Black Perforated Leather band..
Got an email from them. They cancelled my order. Tried to blame it on the fact that I placed my order while I was away for business meaning my order was made from a place other than my shipping address. Spoke to customer service and they were able to place the order again for me for the advertised price. I’m guessing it was a fluke since the prices are now back thru the roof and customer support wasn’t tracking any sale going on.
Has anyone encountered problems with Basecamp and the 5X Plus on a Mac that only has a USB-C port. Garmin Express works fine, but Basecamp rarely if ever recognises the watch, hence route planning impossible. Any solutions appreciated! Thanks
See my earlier post for a work around.
Hi DC,
Got note we need to contact Spotify to get it on Garmin. You can vote on this by logging into Spotify. I just did and can recommend anyone to do so to get heard by Spotify.
Second, do you know if Maestro will be connected to Garmin also for payments? Especially in Europe and in NL, where I live we use, opposite to US, mainly direct debit cards in stead of credit cards. Payning contactless by phone or ring is already possible here, so why not by watch?
Thanks for your extensive reports. very helpful.
Kind regards,
Bop
Dear Ray & community,
I have a fenix 5 plus and love it. However the Volume in music-playback is waaaaay too low for me. Is there any possibility to boost the maximum volume on the fenix?
–> more information:
I normalize all my mp3-files to 92dB using MP3Gain in order to avoid any clipping. I’ve been plagued by the eu-volume-limitation since my first iPod but I could change the firmware on the iPod to get normal volume.
Now I’m using the Sony SBH54 Bluetooth headset & my android-phone with ‘poweramp’-player, where I can boost the volume. When running I use the Sony SBH54 with Koss porta Pros andy simply can’t enjoy the music as it is too silent. So:
1. Is there a (eu-) volume limit on the european fenix 5 plus models?
2. Is there any possibility to increase the maximum volume level on the fenix 5 plus?
Thank you a lot!
I’m not aware of any way to boost anything extra.
Though, I suspect the process of normalizing is more likely the culprit here – since I haven’t heard of anyone else having this issue. Sorry!
There ypu go, Ray:
link to forums.garmin.com
That nasty clipping issue had been a huge problem for me, because the majority of music is mastered to the limit, due to an idiotic “loudness-madness” started by Dr. Dre in the 90’s.
The problem is the fact that volume-limits (eu-limitation) are no referenced to a normalized signal, but the overboosted music.. Therefore my files are clipping-free but simply not loud enough.
Any chance to adress Garmin with hat issue? That would be super-awesome!
Does the F5+ recognise the ID3 metadata tag? If not, you may need to normalise a different way using resampling.
Hi,
In this link a show you a quick test about GPS, GLONASS and GALILEO with the beta 3.53 of Fenix 5 Plus, the purple one is the real track i walked, is this a normal deviation? i waited 30secs for GPS fix, clear sky and bordering the river almost all the time.
link to google.com
This is not acceptable in my opinion,
I have had poor GPS accuracy with my 5X Plus
none of my previous Garmin watches performed so poorly
Each generation of watch should only improve on the last one
I don’t know what the issue is, sketchy software, bad antenna, immature hardware – doesn’t matter, the performance of a watch at this price level should be better
I have seen worse (see my F5+ results in my earlier posts). You have several 6 story buildings in this location and I bet they are of steel reinforced concrete construction. Maybe the one with Taxis Alustiza blocked out a critical view of the sky creating the bigger error just before the 90 degree turn at the top middle of your image.
Yep, a 800 euro watch is tracing this way, not acceptable (worse than the Polar v800).
Don’t know if it can be fixed via firmware or what…
I am so glad i read thru all posts and found out “i am not alone”!
I’ve had 2 diffrent Fenix 5 Plus, first an Titanium model and an regular model, both with totally useless satellite reception.
I’ve had several Garmin GPS watches thru the years, probably ~8 diffrent models and they worked completely satisfying, lastly an FR935 and i felt completely confident to buy an F5+, what could go wrong? Both DCR and several other reviewers had posted it worked flawless, so i cashed $1000 for one.
When i found the satellite reception to be an joke i thought “it’s something wrong with my watch” so i sent all info to Swedish Garmin Support including link to my Garmin Connect, which settings i tested a.s.o. they answered with instructions on how to upgrade the firmware and reset to default settings, i gave up that route, i returned my watch and ordered another one, it was as useless as the first one, i made another try with Garmin Support, wrote an very comprehensive descriptions of my problems, including all things i had tried, and that this is the second watch i have trouble with, they answered with 1. Upgrade to latest firmware. 2. Reset the watch. I then got a bit upset and asked if they read what i had written, and that other watches have no problem to track 100% error free the same tracks i have run. Garmin support answered that it’s nothing wrong with my watch, “it’s how GPS work”. I immidiatelly returned my F5+ and i have decided to keep my FR935 “indefinitely”.
So did you update the firmware or not?
Of course, even tried latest beta firmware @ the time which was “fenix5Plus_356Beta”.
Did nothing for the accuracy.
Every time i contacted support they started with guide me how to update fw, how to change to GPS + Glonass, how to change data recording, despite i already have written that i have latest firmware, i tried latest beta, i tried GPS, GPS + Glonass and GPS + Galileo, i tried data recording Smart, i tried data recording every second a.s.o, and it gets a bit old to get those instructions when i already have written all settings i have tried and therefor must know how to change them.
Worse GPS i have ever owned, tried an old FR210 that been put away in a drawer for several years and that works.
I can’t for my life understand how it can loose satellites on top of a mountain with no trees in the way.
A friend that been training with me use an Fenix 5 and it never lost satellites, mine lost them almost every kilometer.
In a TrainingPeaks blog post about pulse oximeter use cases: link to bit.ly, I’m particularly interested in Perfusion Index that indicates blood flow strength, and its variability implies hydration changes. With LVL not going anywhere, I hope Garmin eventually adds PI and PIV support.
Hi DC you are amazing, thanks for all the great work you do.
I am *this* close to buying the Fenix 5 Plus. Can you help out with two questions please?
1) Can I build my own route at home on the interwebs, then up/download it to the Fenix 5 Plus?
2) Does the Fenix 5 Plus then tell me “turn right here, turn left there”, with a voice from the watch itself (in other words, I’d hear it without having headphones on)?
Thanks!
1) Yup
2) Not from the watch itself, just chirps/beeps.
Thanks, DCR!
Chirps and beeps are actually fine, as long as there’s something to alert me to “stop running straight”!
I am going to ask a similar question on the 645 forum. Rapidly narrowing my choices down to either the 645 or the 5S Plus … much rather have the 645 as I’m just a runner, and don’t want to listen to music when I run.
Thank again, DCR!
When will your “Garmin Fenix 5X Plus (coming soon) – Use DCR Code %CLEVERTAINING% to get 10% off” link be active?
Just shot over a note to find out when. It sounded like there was some specific 5X+ exclusives in the UK (meaning, certain retailers had exclusives). I should have an answer within a few hours.
Great! Thanks for the speedy response.
Hey,
Any news about the link?
Max
Yeah, I checked again on Thursday – it’s still basically some variant of an exclusive with certain UK retailers (actually more specifically, certain UK types of retailers).
In general I find Garmin UK/Europe does super wonky things with how they try and differentiate their products to various retailers. No other sports tech company does it this way. Essentially Garmin attempts to limit certain products to retailers that ‘fit a certain profile’. For example the higher end Chronos watches were only available to specialty watch makers (but not fitness companies).
No company seems to go out of their way as much as Garmin (UK) to minimize product sales or make it challenging for their customers to buy their products. Shrug?
Damn, how frustrating
Hey, Is it likely that Clever Training will stock the 5x+? Just about to pull the trigger, but would hold on for the 10%.
Nothing soon. I checked, and they’re basically still waiting on Garmin here on this one. They’d have it listed tomorrow if they could, but Garmin is restricting the 5X+ in UK/EU markets to specific specialty retailers.
Hello congratulations for what you do … do the reviews TOP … I follow you recently and sorry if I translate but do not speak English … I wanted to ask you since 10 August is my birthday and I was intensioned to buy the garmin fenix 5x plus … I wanted to know from you if it’s worth buying it. if it is precise as many people say or if it always has problems and maybe it is better to wait for 6? greetings alessio
I wouldn’t expect a Fenix 6 anytime soon – given this is less than 45 days old right now. Typical Garmin Fenix announcement cycle is 14-18 months.
14-16 months from the announcement of F5 or 14-16 months from F5+?
I hear what you are saying, but do not know where the start line is :)
Hi,
As much as I like the Ambit3, I’ve got to a point where there is a huge benefit to having on device mapping, and a work project looks to use Connect IQ for some interesting things.
Does anyone know if I need to retire my Suunto HR straps? Or can they work with the Fenix 5+?
Following up my own post, the 5 Plus works great with the Suunto HR Strap.
Picked it up and so far has exceeded all expectations.
Allows me to stop the Apple Watch / Ambit 3 dance.
Thanks for the great review Ray,
I have been using my Fenix 5 Plus Spark Orange for over a week, battery life works as per Garmin’s chart and GPS/Glonass has me within 4 feet of where I actually ran on the road. I am a very happy Garmin Fenix daddy. I added Garmin’s tide chart APP for fishing and it also works perfect.
Heart Rate Variability
Hi – Is anyone using the HRV feature on the Fenix 5S/5/5X Plus watches to tell them that they are overtrained and need to back off a bit (i.e., the HRV is flat)?
Or is the presented data simply not displayed in a way to be able to make conclusions like that?
(DCR, I saw you made a presentation recently about HRV!).
Fenix 5 HR plus Open Water GPS distance stops working.
Tried GPS normal swims and GPS Glosnas swims
Both stop after 50-60 meters for swims of approx 1-1.3 km
New product, on the cycle it’s accurate but not in pool swims nor in open water
Hmmm, I haven’t seen that with pool swims, but openwater swims saw something kinda like that: link to youtube.com
I have the exact same issue with open water swims. Every single time. It’s completely broken. No help from Garmin support either – very disappointing… I regret upgrading from my 920xt
Obtained my floors goal today after taking a ride in an elevator.
this is the Spotify new ideas page for any interested Fenix 5 plus users or running watches to flag up the idea to Spotify management in order to allow Garmin to link Garmin Music with Spotify as in the article.
a few more thousand supporting subscribers will help push this out for us all. link here and carry on the community pressure….
Mark
link to community.spotify.com
Done. Hoipefully Spotify will change their mind soon!
Thanks for the awesome reviews! Something I’m unclear about though is the battery life. The Garmin site lists the GPS-on life of the Fenix 5+ as “Up to 18 hours”, but your review says it’s 32hr. Just want to make sure I have the right info before I decide what to buy.
Thanks again!
It is up to 18 hours GPS for the 5 plus, the 5X plus does up to 32 hours.
Wow, I am very apprehensive about buying the 5S Plus, given the descriptions of horrible GPS performance (Andrew’s many posts, with maps; Jan Nilsson #704; and others).
I was going you wait about a week when I returned from traveling to order a Fenix 5S Plus, but now I’m not so sure. Before reading about all the GPS problems I chose it because of the size (vs. 935), for the maps (vs. 645), and for the Saphire (I break everything I touch).
Now I’m not so sure … should i buy something else instead?
OK, I’m thinking about it some more. Caution, heretical question approaching: “Really, how important are these GPS deviations of the sort described in the comments?”
What I mean is … sure the route maps aren’t as pretty, running through the River Thames or what not, but if I’m looking for GPS only to:
1) ** Reliably and accurately ** show me a distance so I can check my progress in terms of pace and other metrics, and
2) To run in new locations and not get lost,
Is the current state of the Fenix 5S Plus GPS, warts and all, good enough for those purposes?
Maybe the best thing for me to do is buy the watch, and take it out for a few runs along with my Android phone, and compare distances. I guess I can always return to Clever Training in the first 60 days if I’m not happy with the comparison …
1) No. You will have to buy a foot pod for that (preferably a Stryd).
2) Just. You will probably have to retrace a route or two if on the sort of detailed small tracks prevalent in UK woodland. The maps would stop you getting truly lost. If it is a large motorway of a trail in Yosemite it won’t matter.
It isn’t good enough to trail run a new route in demanding conditions without having to make frequent stops to work out where you are and what route to take. If you are just hiking then it is not quite so irritating.
Remember that Garmin’s auto-zoom is broken so you have to switch it off. The track may then just disappear off screen. If you manually pan and zoom to find it It stops centring and orientating the display.
The bottom line is you are going to have to walk and fiddle with the watch periodically. It is not fit for the continuous running of new trails in demanding conditions.
Thanks for your post, Andrew.
1) I was planning on buying the Stryd Live anyway, so that will work well.
2) It sounds like I run different sorts of routes than you do … I basically run streets, not really wooded trails or anything like that. So maybe I’ll have some better luck with the GPS.
I think I’ll be buying the Fenix 5S Plus in a week or so … comparing it with my Polar Beat and Polar H10 chest strap (and Stryd Live too) in terms of total distance run.
I’ll report back in a couple of weeks in terms of:
1) How far off the total distance run is (whether the maps are “pretty” or not), and
2) Using the wristwatch map to “figure out which street I need to turn left on”. I’m actually not able to focus on very much when I run, so I won’t be peering at my watch to see when to turn. I’ll see if I can have it “beep or chirp” at me when it’s time to turn, like Mr. DC Rainmaker said in a post higher up.
Thanks again.
Jan – do you have anything you want to add (I appreciate your post #704, above)?
My 2 cent.
1. On one of my F5+ worse days watch said i had run 8.8km, track it had recorded was 4.8km and real distance was 9.8km.
2. This was the reason i bought the watch in the first place, and only reason i miss it.
When running unfamiliar terrain i want to make an route beforehand, then i have an help which direction the heading is if i choose to run a diffrent path.
I used it during an trailrace i ran a couple.of years ago when using FR935, i had made an route on that also but missed an hidden turn, but since i had the route in the watch i noticed it after a while, in the F5+ it was much much easier to se exactly where to turn, i ran past the turn but since i missed it before i was awake and looked @ the watch and saw easily that i was on wrong trail.
I have recently picked up the F5+
I’ve done street running, heavy woodland mountain biking, long countryside road riding, city road riding, and walking.
It has done an excellent job at all those activities.
I’ve no doubt it’ll have a brain fart at some point, but certainly given that spread of activity, I’ve not seen anything akin to some of the issues that people have reported.
I’m very pleased with the device.
(Note that this watch has replaced a day-to-day Apple Watch, and a dedicated Ambit3)
I forgot, despite that we are several that isn’t happy with satellite reception on them there seem to be many that are, so if i was you i would buy and try and if it’s not working for you, return it.
I have posted my problems on a Swedish running forum and i seem to be the only one having problem, of atleast ~5 others owning F5+.
I’ve to jump in here and say, that GPS-tracking also works pretty good for me (and I’m trail-running in GPS-unfriendly spots).
I’ve seen those reports (with tracks) from people having issues (one of them is even a Garmin sponsored athlete) and if I’ve had the same issues I’d also complain.
So the question is: are there (so many?) faulty devices or is there something else that can trigger those issues and I just have been lucky until now.
Marcus, in which way do you mean it’s possible to “trigger the issue”?
I owned +8 Garmin Forerunner models Before i bought F5+ and never noticed any irratic behavior on any of them, i also owned several Nuvi and GPSmap satellite recievers and they work just fine.
I can’t Think of any possibility to “trigger” one device (F5+) and not any other of the devices used @ the same time @ the same place.
I have run together with others with diffrent FR and Fenix 5 watches and they have worked 100% fine and my F5+ have been all over the Place.
I have no problem that there can be faults in Products, no one can produce 100% error free all the time, but despite the badness of my two F5 +, their support was even worse.
hi,can any one comment if there is really much differences between this new 5plus and for example the Garmin Fenix 5X.? now there are a few offers of 5x Sapphire for 659 which i think is a good deals because of the sapphire always been higher prices.thank please any comment is welcome.
Read this review, especially the top bit cunningly entitled Whats New to understand the differences.
Finally music capability! Just costs a steep $200 more :(. Oh, and I have the Fenix 5S Sapphire, purchased only 9 months ago, even more ;(. Why does Garmin do this? What about loyal customers who have already plunked down hundreds of dollars within the year and yet now their watch is worth so much less and to upgrade you spend effectively even more. I know tech is advancing quickly here, which is great, but I’m not into spending hundreds more on a new device every year. My previous device was the giant orange 310XT and it was good for 8 years, until Bluetooth really made it no question to buy a new device. Just venting, but maybe hoping to find others who share a similar sentiment. How long before they stop selling the non + 5 series units? I give it 12 months.
Hey Ray! Thanks so much for such a detailed review as always!
I’m looking to upgrade from my Fenix 3, so I know it’s a significant jump.
My question is in regards to the “less than stellar” open water tracking results you experienced during your video. Has any of that been addressed by chance?
Thanks for the reply!
–Steven
Unfortunately still sucks. :(
Thanks for the quick response Ray.
Follow up Question…
Was the “Suckage” while using Galileo satellite, or Glonass?
Just curious if it is directly related to one vs. the other.
Thanks again!
–Steven
All my swims have been with Galileo.
My next one I’ll try going back to GLONASS. When noting this to Garmin, they didn’t mention any concern with Galileo.
I could almost excuse it if it was a Galileo-specific thing, and if they just simply disabled Galileo if that was the issue (for swimming).
I look forward to hearing your findings and will stay tuned!
Just going with the whole process of elimination methodology here.
Thank you for testing!
–Steven
Any news on this? Considering buying this fenix 5x+ for triathlon, but no use if open water feature sucks
Still sucks. I did an open water swim last weekend (latest firmware). Fenix 5 Plus on one arm – 920xt on the other arm. The 920xt tracked everything perfectly, Fenix 5 Plus recorded only half of the distance! It’s ridiculously bad.
New beta firmware is supposedly available to finally fix this
link to www8.garmin.com
Anyone using their Fenix 5 plus with a Varia Radar? Does it beep when a car is detected?
Yes it beeps and vibrates
I’ve had a Fenix 5 Plus for two weeks now. I got it right before going to the beach. Over 15 open-water swims, it failed to produce a single track if I didn’t stop every few hundred meters and stuck my arm out of the water (using GPS, GPS+Galileo, GPS+Glonass, Ultratac; and tracking smart or every second).
Starting two days ago, it no-longer recognizes my Stryd (even though my Fenix 5 does recognize it, so I know it’s not a Stryd issue).
Garmin is sending a replacement unit.
Overall, I am thoroughly disappointed with the unit, but I can’t say I’m surprised, as I’ve had similar issues with previous Garmin units.
Glad to see I’m not the only one getting that exact swim pattern as you. And good to see you also validated it on non-Galileo too. Sigh.
I did a fair few OW swims out in Turkey on holiday with fairly rough seas, and the tracks were not that sucky….I think one out of 10 had a random spike in it, the rest were what I’d consider good enough!
You can see the one spike at the start of the above swim… zoomed in shows a random spike.
Just to clarify Greg, since you mentioned you were on holiday.
You sure you just weren’t doing long walks on the beach with a margarita in your hand? :)
(That’s impressive, that’s by far the best swim/margarita track I’ve seen from a 5+)
defo swimming, but a 935 not a 5+ (as I hoped the screenshot showed) but I understand the 935 has similiar issues for some folk so trying to shed a Ray (sic) of light….
This was the walk I did to check the distance beforehand :)
and a second swim with the 935, the spike to the beach is correct as I took a floating plastic bag to a bin as there are plenty of turtles in the area!
and should say on this one it correctly shows me going under a pier twice!
Guys, just got a 5plus, went for a few open water swims with awfull results, it would stop measuring after 200m (the distance I have as default for autolap) I had to wait about a minute every 1Km for the watch to catch up in distance, generating several 200m laps at 25 seconds. Same issue with Galileo and Glonass and smart /1 second recording.
Hi Ray,
I saw one of your other posts with Fenix 6 improvements in Open Water track. Do you know if Garmin is still working on similar improvements for Fenix 5 Plus or it is like “we did it for current ( Sony) chipset and it isn’t our PRIO to take care of old ones (Mediatek)” ?
I am mainly running, but right now taking a pause from it during vacation and can compare my old 910 quality to newly bought Fenix 5 Plus ( Software 10.00) … 910 isn’t perfect, but in comparison to F5+ they are much better …
Regards,
Evgenii
Bought a 5S yesterday and cannot figure out how to unlock the maps.. The unit instructs to “Unlock PRO to see the maps” and “START:Open menu UP/DOWN/TAP: change screen”. Anyone knows how to do this?
Hello.. I just received my Fenix 5 plus and the Optical HR sensor seems to not like me at all.. I haven’t had a problem with my Fitbit or the Apple Watch but this will not read my HR consistently at all-if at all… In speaking with Garmin they recommended a firmware reinstall or to simply return the unit. Is this a consistent problem for people of color? I typically run with the chest strap anyway so that’s not an issue for me but I wanted one device to monitor HR during the day and I loved my fenix3 but it was not the HR version.. Thought this upgrade would solve those problems but sadly no…
Since it now can pair with Bluetooth headset, dies that mean it can provide audio cues without the phone?
Anyone pairing the Fenix 5S Plus with Stryd Live (not the fully-featured Stryd Power)?
(So excited, delivery of my new watch expected tomorrow!)
Just read on the Stryd site that they have run out of Stryd Live pods, and won’t be selling any more. Wow!
I’m not really sure what that means, because their tech support recently told me the only hardware difference between the Stryd Live and Stryd Power is the charging mechanism (Stryd Live having a mini USB plug, and Stryd Power having a non-plug, contact charger). The Stryd Live can be upgraded to Stryd Power via a Firmware update, so if that is something I wanted to do, I would have a Stryd Power that gets charged with a mini USB plug rather than a non-plug contact charger.
But anyway … anyone using Stryd Live with a Garmin watch (I’m hopefully taking receipt of my Fenix 5S Plus today)?
I have the stryd live pod, it works great both with my garmin 735xt and my old 310xt.
I’m curious if others are experiencing excessive post-GPS activity drain from the 5+. I seem to lose about 10% battery in the 3 to 4 hours after ending a GPS activity, and then the watch normalizes again. As it stands, I’m getting slightly over 4 days of battery life on the 5+, and that’s with only logging GPS activities on alternating days.
I’ve been doing a side-by-side comparison with my 935 and after 4 days with two GPS runs and two treadmills runs my 935 has 53% battery remaining and the 5+ only 17%. All the settings on the watches are identical.
I’ve been assuming (hoping?) this is a firmware issue as I’ve seen it reported by others in the Garmin forums but I’ve yet to receive a response from Garmin to my inquiry.
Yes, similar observation here. Got the 5P charged fully last night. Was 99% this morning. After a 55min run it was at 93%. Rest of the day was just a smart watch with notifications. It’s at 86% now.
Yes, same for me. Battery drain seems to be fine during activity, but post activity I am also experiencing increased drain while watches being idle. Fenix5+
Have the fenix 5X Plus. Watch still having issues playing music. Counts steps while driving. And have also obtained my floors goal driving uphill and in elevators. Regret buying this piece of crap.
But when Garmin will unlock the heart rate sensor on swimming ??? It’s possible that only Garmin lock it ?
Read somewhere that Galileo is the Europe version of Glonass.
Does it matter if I live in Singapore/Asian countries that I pick Galileo or Glonass for accuracy?
Thanks ray
No.
GPS satellites are not geostationary. Pretty much the whole planet will get a little taste of any and all GPS satellites.
link to in-the-sky.org
Ray
I am torn between the Fenix 5x with a metal strap, which I could get for c£570, or the Fenix 5x plus with Titanium strap for £1000. Do you think that the extra features on the plus justify the price difference? Any feedback would be appreciated.
I do prefer the look of the plus.
I can see you must be torn and feel for you. Why not read the reviews then you can make up your own mind which piece of overpriced crap to buy. If you do a little sport the polar vantage v is out soon.
Go read the bit at the top entitled Whats New and really only you can say what would suit your needs based on what each watch can do.
Like your review. I bought a 5s and eventually moved on to 935. The key factors are the weight, battery life and antenna performance.
Was shocked today when went to swim at a smaller pool…and was able to custom set it to the correct size!!! 17 yard pool. Been a feature upgrade I’ve wanted for at least 3 years!! Garmin must of release a firmware upgrade recently.
Hi Ray, I use Mac and tried to install Garmin OEM maps, such as Europe Cycling, and it did not work – memory fsil. Talked to Garmin CS and they reported the devide does not support the installation process because of the ammount of memory required to install the map database in the first place – important to note Garmin.com states compatible with 5S Plus. Important to note the garmin 5s plus has and had nothing installed beyond default firmware. So, it does have maps capability but you can NOT install new Garmin maps becuase Garmin map files are way too large….at least they refunded me the map $49…but still amazes me how these developers dont think about these very basic aspects…looks like many othe users reported the same to them.
hello Ray and thanks for this awesome review (you have some trusted readers here in Israel…)
I’m thinking about upgrading my suunto spartan sport WHR to one of 5 plus series but now I have second thoughts after reviewing some of the posts about poor GPS accuracy. my question is: is it possible that the GPS works differently in different areas around the globe? i.e. if I live in the middle east could I experience different GPS accuracy than someone in the USA?
Barometric altimeter!
Dear Ray, I have an idea how a barometric altimeter works and I know the issues, if the air preassure is shifting during an activity due to weather/temperature-changes. I was very happy to read about the option to activate “altitude-correction during the activity” on the new, map-based, fenix models. Could you please briefly explain how that works?
I assume the fenix is using the height information from its maps to perform offset-compensation not only at the beginning of the activity (like the older fenixes do), but also during the activity. How often does that happen?
Did you compare that feature agains an older fenix model and can you make any commets on the usefulness of that feature?
Thank you very much!
Sorry if this question has already been responded.
I have a Fenix 5 and iPhone 6. I want to have the information from the Fenix 5 while biking to be shown on the iPhone (bigger screen ; )). Is this possible?
Thank you for your time!
No, it’s not possible
Hi Jacobo
You can get audio cues sent to your phone for various parameters such as HR and pace if that is of any help.
I suspect what you want could be developed as a third party app for Garmin Connect as I believe the SDK supports this though don’t know if one already exists.
If not and if this was something people generally wanted I could have a look and see if I could develop one. Might be an interesting project.
I have the 5S and I am wondering if the the plus would help with the following issues:
I jog on a track because I have arthritis and I hope the soft surface is easier on my joints. Usually I have run in the same direction, starting at the same point. When I have run in the other direction, or started from a different point, the gps seems to default to the mile markers from previous runs, so that suddenly I am supposedly running much faster than previously. This is by far my biggest concern. I checked today and I see that I was running with only normal gps, so maybe changing it to Glonass will help. I just don’t think the watch should be defaulting to previous runs in order to, supposedly, enhance its accuracy. That seems like cheating, and in my case of course it totally backfires.
(It’s very obvious because I run on the very outside of the track and it’s about three and two-thirds laps to a mile. When I change direction, I get the one mile buzz at the same place as usual, which is only three and one-third laps in that direction. One day I started from the opposite end of the track and the one mile alert was again in the same place, but one lap earlier! I run twelve or thirteen laps, so eventually it balances out in total, but that does not make it right and it still throws off the other statistics.)
The tracking of floors varies tremendously and it seems to be related to humidity in the weather and from my sweaty wrist. One day walking to the track and back, with no elevation change, I racked up seventeen floors!
Sleep metrics are not particularly important to me, but I notice that the time when I am lying in bed doing the crossword on my phone is when the app records ‘deep sleep’.
Let’s see if I get more response with fewer words. Does the Fenix 5 cache GPS data? If you do the same run frequently, and one day you change it just a little, does the map revert to how you usually run it? I don’t see any other explanation for my experience. I called Garmin and the support person said there is not a cache, but he did not explain the errors I get either.
No. It caches satellite positions for a quick GPS fix. To satisfy yourself of this just reset your watch before your counter sense workout. It will take longer to get a GPS fix but won’t affect the GPS recording or your GPS based pace. I have seen several posts from people who are unhappy with the GPS on the F5,F5+ series. It will certainly struggle on a 400 m track. A good GPS watch will work out your position within +- 2m (I don’t consider the F5/+ to be good). Imagine recording this every second. Worst case is it could be up to 4m/s. That is a whopping 14 k / h. Of course that is worst case and the readings will be smoothed/filtered but still pretty awful. Suggest you consider getting a foot pod which will give you much better instantaneous pace.
Thank you so much for answering! I do actually run with a foot pod, the Garmin one, not for instant pace but for the cadence primarily, and just because I have it. What puzzles me is the consistency of the errors. If it was just the gps being generally inaccurate, I would expect the one mile alert to come randomly somewhere between 3.3 and 3.6 laps every time. But clockwise it’s always at 3.6, and anti-clockwise at 3.3, which turns out to be basically the same place on the ground. Does that make sense? Also, it consistently tells me that I am going much faster in one direction than the other. On Saturday I got an alert after a couple of laps that said my performance was suddenly +7, whereas I have never gotten more than plus one or two before.
On the one hand, having a cache (and processing the information from a cache) seems unlikely in such a tiny computer; on the other hand I am really puzzled by the consistency of the difference between clockwise and anti-clockwise. Sigh. Again, I really appreciate you answering, even though I’m still baffled.
The only reason would be the GPS reception is different going the other way round. I guess you have to consider any obstructions to GPS reception in the locale and also which wrist the watch is worn on. It might be interesting to try wearing the watch on the opposite wrist for the counter sense workout (so it essentially “sees” the same sky).
I can try switching my wrist no problem, although it seems a bit odd. The track is in a large park beside Lake Michigan, so it’s pretty much open to the sky. You said the foot pod would help with tracking my speed more accurately, but wouldn’t I need to calibrate it with my stride length first? I believe my Garmin footpod obtained the stride length from checking against the gps in the watch initially. Am I wrong? Is it basically just silly to use gps to run on a track? Maybe I should just time myself as I run around the laps and turn off the distance alerts.
When you say reset the watch before the counter sense workout, what sort of reset do you mean? A total factory settings reset, or is there a place to specifically reset the gps?
Thanks for your responses. I was originally asking if the plus would be better in this respect, but it does not sound as though one could count on it being any different.
1. Calibration? Depends on the pod. Stryd is pricey but probably the best and works out of the box without calibration. Lots of people (including me) love their Stryd whether for power, instant pace or accurate distance measurement. Other pods need calibrating but this is usually merely a matter of correcting the pod estimated distance to the known distance using an app. Several laps of a track will give you a known distance. Pods are more than mere pedometers so you don’t need to measure your stride length (which of course varies). The accelerometers/gyros allow modelling of foot movement which is why they work so well.
2. Silly to use GPS on Track? It is probably not the best use for GPS. For lap pace – thats an easy calculation that you can do beforehand so you know what lap time(s) to aim for. The distance from GPS will be less accurate and therefore the lap pace/speed. GPS is not good for instantaneous pace as explained above. To emphasise the point: if GPS location is recorded every second but only gives position to within 4m (common for a domestic watch GPS) then even running at 50 min 10 k pace it is possible the watch would record your position as unchanged during that second – so stationary! Of course the algorithms are not that crude and filter the values (a moving average would be one simple type of filter) but then there is a tradeoff between stability and responsiveness. In reality “instantaneous pace” is short time interval pace.
3. Not a factory reset. Just press the top left and right buttons for around 15 s and the device will reset (at least my F3 does and F5+ did).
The bottom line: If you can afford it just get a Stryd. It is a bit expensive but a lot cheaper than an F5+ and a must have piece of kit.
The irony is that I didn’t buy the F5 for the GPS particularly. My goals are all about health, joie de vivre and managing arthritis pain, and I bought the F5 because I liked the integration of activity monitor and heart rate monitor. But when I was running the track the same way each time, I became accustomed to the feedback at each mile, and when I changed direction and the feedback was obviously wrong, I was upset, but mostly just really puzzled. I have to accept that there isn’t a cache because one, it doesn’t make sense that there would be, and two, no one else is reporting experiences that validate mine. So now I need to step back and recalibrate myself by remembering my actual goals. Thanks again for responding. It is so nice to connect with someone when I can’t believe what I’m seeing!
i was primarily interested in this Oximeter thing, hoping it would take automatically and periodically readings along a run so that i can see how my oxygen rate evolves along the time line. now reading your review it looks more like you have to be steady and triggering the reading by yourself. is that right? a connected question was about how the oximeter readings connect to Trainingpeaks (as TP recently brought support for that).
many thanks for the in-depth high quality review (as usual ) :)
Franz
Hello Ray,
How does the Fenix 5 Plus support apple music files?
Will it work?
Hi –
Big thumbs up with very limited data for my new Fenix 5S Plus:
– HR from Polar H10 chest strap (“HR from this device – Always”)
– Stryd Live foot pad for distance (Distance from this device – Always”)
– GPS Plus GLONASS
– Mildly treed street run that I had pre-loaded into Garmin IQ.
Maps had me running on the correct side of the streets, maybe a few meters off now and then, but certainly good enough for what I need.
Also the calculated/displayed Pace seemed much more reasonable than that I previously obtained by using my phone for GPS – that was crazy variable, all over the place, this one looked like it was probably spot on.
I’m quite happy so far. It’s great running without my phone!!
Next step – to intentionally make a wrong turn, and see how it does alarming me that I am off course. Whenever I do a new run I invariably make wrong turns, so I will depend on this working well (as I travel and run new courses a fair amount)!
BTW, I downloaded the “Dozen Run” data field as my main running watch display. It’s pretty good, I recommend looking at it as a go to “Data Field” while running. HR and Cadence display is a little small, but those can be set up as separate data fields (downloading separate apps) one button up/down, and I found that clicking buttons during running is not nearly as distracting/a hassle as a feared it would be.
Thanks to DCR for this awesome site, and for all the guys and gals who answered my questions about the watch prior to my purchase!
A chest strap and foot pod is certainly the way to go for the most accurate HR and instantaneous pace. The core functionality of the watch (gps and optical hr) is not being tested. My F5+ wasn’t good at either though I know some folks are content with the F5+ series.
Anyone know about “3D speed and distance” on the Fenix 5S Plus?
If I wanted the distance to be what a tape measure placed on the ground of the hill would read … would I enable vs. disable the “3D speed and distance” option?
Thanks!
Enable
Thank you, Andrew!
Because the Fenix 5 plus series should be just an interim solution and it was also available on the same day of the presentation, a new Fenix will probably be presented at the CES 2019. Garmin also had an interim solution in 2015, the Forerunner 225, and 5 months later, the Forerunner 235 was introduced. I think the new Fenix, like Polar, will have improved heart rate measurement, longer battery life, and integrated running power measurement, because even Garmin does not want to leave this field to Polar for long. Furthermore, the new Fenix will have a better utilization of the display.
Shoulda, woulda, coulda…. (as my Dad always likes to say).
I wouldn’t count on any new Fenix line a mere 6 months after the previous. Garmin’s never done that, and wouldn’t really serve them much. There’s significant benefit to Garmin waiting and getting bigger returns on their Fenix 5 Plus series manufacturing/distribution/retail investment.
I know a lot of folks like to use the FR225 argument, but that’s actually the singular case in Garmin’s entire history of outdoor/fitness devices that sub-1yr reresh occurred – and was mostly due to a confluence of weirdness on getting the FR225 to market later than they expected while needing to launch the FR235 for Connect IQ reasons. Given Garmin has released ~60 fitness/outdoor devices since 2015, none of which fit that pattern, I wouldn’t really use that as an example.
Most Garmin products right now are operating on a 1-2 year refresh cycle.Mainstream products tend to be at the 1yr cycle, and less mainstream products at the 2yr cycle.
You’re right! So there will be no new Fenix before CES 2020! Thank you Ray for your constructive feedback!
Do you think Ray that we may be now close to see a new and better triathlon watch?
Thinking about it some more, I have to ask (though it’s just a trivial question) … when would anybody benefit from running hills and having it set to “disable”?
I would turn the question around. Does anyone benefit from running hills and turning it on? The issue is that neither distance measured as a projection of your track on to a horizontal plane (well, actually a small nearly flat bit of an oblate spheroid) nor 3D distance are representative of the effort of walking or running up and down hills. 3D speed is not the same as gradient adjusted pace (GAP) or power. When you create a route most mapping tools give the projected route length and the GPX file produced does not usually contain elevation data. You might expect to have finished a route based on 3D distance but instead find that you still have a way to go.
Since race courses are measured out using 3D distances, I can’t see an advantage to not having 3D distances enabled on the watch while training?
I use a Stryd Live foot pod, which I assume must be 3D distance based. I’ll have to pay more attention to see if there is a significant distance difference between the foot pod measured distance vs. the distance calculated by the mapping program that I draw my courses on then download onto the Watch (5S Plus).
I take it back. I have just looked at the GPX file for a route exported from Movescount and it includes an elevation tag.
170
Suunto says:
If you are using 3rd-party software to analyze your tracks, check how the track distance is calculated. If the calculation is using 2D distance, you may not want to activate 3D distance in your watch.
Otherwise, if you are frequently exercising in hilly or mountainous terrain, you should activate 3D distance.
So I think you have answered your own question.
Is there a reason that you did not use a conventional GPS as a baseline or reference for comparison to smart watch track data?
What’s a conventional GPS?
Hello Ray,
I’m looking to purchase the 5X+, but have been warned against the questionable battery life. I know the claimed battery life, what is it like in reality though. I’m going sure I’ll be using 24hr HR monitoring, in fact most likely only step counting in day to day use.
So I too have had MAJOR frustration with the lack of open water swim capability with this watch. Went through a number of changes with my first 5+, including satellite, data rate, etc., and nothing helped. Garmin exchanged the watch and took it out for an OW swim…and no difference. I had a Fenix 3 that tracked my OW swims pretty darn well. Guess I’m going back to that one. So many great things about this 5+, but I just can’t get past how terrible the OW swim feature is.
My LBS spoke with their Garmin rep, who claims they have a fix…but…
The really sad thing is my friend swam with his Apple Watch next to me, and had great data for the swim. Sigh….
Please Ray…tell me Garmin is going to fix this. Or can you suggest another multi-sport watch from Garmin that does all the 5+ is supposed to do AND tracks OW swims…
What GPS version do you have Scott? The latest 2.3 on my 935 seems to have been getting better reviews for OWS.
OK, here’s a tough one I think, it has to do with the 5S Plus VO2 max calculation/watch display. The Firstbeat.com white paper link to assets.firstbeat.com states they calculate VO2 max using an age-based estimated max HR (it doesn’t say which formula it uses) – so clearly there will be an error in the watch-displayed VO2 max if the age-based estimated max HR is off.
My self-measured HRmax is about 15 bpm higher than obtained using 220-age formula, and is also about 10 beats higher than using another formula I came across. Not knowing what formula Firstbeat uses to estimate HRmax, it’s probably fair to say it is underestimating mine based on the what these two formulae are predicting.
I’m trying to see if I can somehow get the watch to give me a more accurate VO2 max, given the built in limitation of its almost certainly using the wrong HRmax in its calculation. Anyone here have any ideas?
(I note that on Page 4 of the white paper there is a graph and a narrative that says if the true HRmax is about 15 beats higher than the Firstbeat-estimated HRmax used in its VO2 max calculations, then the Firstbeat-calculated/watch-displayed VO2 max will be off by approximately 9%. At first glance it would seem like to know my true VO2max I’d just need to adjust the watch-displayed VO2 max by 9% … but since it doesn’t say whether the formula-predicted/watch-displayed VO2 max would be 9% too high vs. 9% too low under those circumstances, that information actually doesn’t help me!)
Why? For training you just need to know your threshold in whichever parameter you are using for your training (LTHR, rFTPw or threshold pace) to set up your zones. V02 max calculated using the FB Algo should be consistent if not accurate so the trend in VO2 max is still a valid measure of progress within a 1 year time interval. If you want to know your true V02 max go to a sports lab and get it measured. VO2 max is only part of the story of performance and is heavily genetically determined / hard to improve. The ability of your body to deal with increasing lactate production as you approach V02 max is crucial and is highly trainable. You change a progressive increase as you approach VO2 max into to a sharp dog leg. This allows you to camp just below it during a long run and survive. I am 60 with a tumbling V02 max but I am still able to do OK because I run virtually at threshold. Maybe you should chase a different number?
Thanks for your reply, Andrew.
“Why”? Because I’d like to know my VO2 max, like a lot of other people! :)
I don’t disagree with anything you wrote (except perhaps that VO2 max is hard to improve, I’ve read many places that it is easy to improve for the untrained athlete which is what I am now after taking many years off), but my point is that I’d like to learn a bit more about my physiology. If you’re not that interested in yours, that’s cool. But if the watch can display a reasonably accurate VO2max value, I’d sure be interested in seeing it!
Hi Notne
I too am interested in the physiology of exercise in general and of course in my own numbers. I more heavily weigh those parameters that help me improve or pace myself in a race.
You are right that if your are relatively untrained you will see significant increases in estimated VO2 max. You then see diminishing returns and quite quickly approach a limit. It is this limiting VO2 max in the face of increasing training that is pretty much what you are stuck with. It is quite heavily genetically determined.
It is your metabolic clearance rate of lactate (MCR) that determines how close to the wind (limiting VO2 max) you can sail and this makes up most of what can be conditioned. I have sketched a graph which hopefully gives some insight into the increasingly dog leggy curve of lactate vs VO2 with training.
I find all these technologies give wildly different VO2 estimates (frequently just under 10 ml/kg/min) and also predicted race times (by over 5 mins in a 10k). For me Polar seems far more accurate in predicting my race times (to within seconds, slower, longer) than Garmin though paradoxically based on higher VO2 values.
link to physiology.org
Hi Andrew!
Thanks for the graph. I love graphs! Just to confirm, the Y axis is serum lactate level, and each successive curve to the right represents further conditioning/improvement in VO2 max (I’d expect them to kind of get scrunched together as one moves right, maybe the graphing program didn’t allow that)? BTW, sorry, the physiology link isn’t working here, I tried on Edge and Firefox :-(
I think I hear you say that after I become somewhat conditioned again, following VO2 max will get kind of pointless, because the changes will become ever incrementally smaller.
I’m not even sure my running style is on the bell curve, as far as the assumptions that go into all these estimates. Without getting to navel-gazey for this thread I hope, I’ve noticed that I’m running at 90-95% of my true HRmax for all but the first 1/4 of my runs (just 4 miles at this point; with of course reaching full HRmax during the final sprint at the end). I do feel like I’ve got a good handle on true HRmax based on my running – I absolutely feel like I’m running all out, there is no chance of my speaking two syllables, maybe not even one, and I’m moving boatloads of air in and out of my lungs it feels like (Polar H10 chest monitor used).
A little OT, maybe … besides wondering if that is bad for me (just in case it is, I only run every 2nd day, and my resting HR on run mornings is low, and I feel pretty good on those mornings), I wonder if that running style (pretty much pegged very close to HRmax for most of the run) would throw off any “brain” in the watch that calculates VO2 max, and all the other very cool sounding performance parameters it can display. If you had any thoughts (as the closest thing to an exercise physiologist I know!), I’d love to hear them.
But back OT … given the limitations of following VO2max improvements after achieving a certain decent level of conditioning, would you recommend one or another of the watch-displayed parameters to track as a surrogate for the less static improvements in “metabolic clearance rate of lactate” that occur with further conditioning? Besides, of course, total running time over the same course, ha, ha! ;-)
Thanks again Andrew, I really appreciate your answers.
Hi Notne
P1. Correct. Its essentially a sketch on the back of an electronic fag packet but I should have “scrunched them up”.
P3. Keep your running style as the evidence is that changing it is likely to lead to reduced performance despite the hype around this. You could well have that high a HR. I have noted that my LTHR has reduced as I have become fitter but my max HR has not changed significantly. The HR you achieve as you sprint at the end of your 4 mile run is not your max HR. Max HR is just one way (and IMO not the best way) of setting HR zones.
P4. Probably. The problem is they do not calculate but statistically infer these metrics. Change your age in Garmin connect and see how it affects your results!
P5. Running time over the same course, such as a Saturday Parkrun, is a great way to benchmark improvement. Also of interest is your running pace on the flat while parked at your lactate threshold. For may athletes these are pretty much the same thing! This can be displayed in Garmin Connect.
I think we had better stop there as interesting as the conversation is it does not specifically relate to the F5+.
Hi Ray. Would it be easy / a good idea to set up a page not for a specific product but for threads that may be of general interest but are a little off topic (and long)? You could call it “Off Piste”! You could then truncate a long thread with a link to its continuance within “Off Piste” rather than risk offending through summary deletion. This would not require redesigning the site. Of course I realise I run the risk of people commenting that Andrew is off piste again! (-;
Thanks once again, Andrew.
Yup, that would be cool Mr. DCR if you could have a little physiology thread on the side!
I can update: The nice folks at FirstBeat say that if one replaces the default (220 minus age)-determined HRmax in the Settings menu with a manually-entered one (perhaps determined by actually running), the VO2max calculations will reference the manually-entered HRmax value, with accordingly different results.
am i missing something here – in australia JB hifi have the Fenix 5 for like $400 less than anywhere else.
link to jbhifi.com.au
Am i missing something on this model? have been thinking about the Apple watch S4 but the battery life i think would drive me nuts. I’m manily a cyclist but looking to do long off road runs. currently use a Fitbit charge HR day in day out for HR 24 hours a day and sleep monitoring. Thoughts people? go the Fenix 5? Apple watch or maybe a higher model in the fitbit line?
Thanks
Matthew
GPS is *horrible*
Just did a 6 mile first run with a new Fenix 5 Plus Sapphire. Running with my daughter, then we compared tracks. It’s ridiculous. It’s awful! Her old Forerunner 235 ($250) is spot on, my $800 brand new Fenix was going through yards and peoples houses.
The track is so off, it’s a real WTF??
To it’s credit, the total distance was within 0.02 miles of each other, spot on // they probably use factors to correct.
I’ll do a few more runs, but if it stays, this is going back. NOT A CHANCE of keeping this with this non-accuracy.
Maybe Garmin should focus on getting the weight down and GPS right instead of adding more features? If the GPS is off track, the weight too high for proper sports, then the whole reason for existing is gone.
I am very disappointed.
I use “GPS+GLONASS” for the GPS watch setting, and a $99 foot pod (Stryd Live). I run through neighborhoods, mildly to moderately treed. My map tracks are perfect.
Even if you don’t have a foot pod, maybe if you chose “GPS+GLONASS” instead of “GPS” you might get better results?
(This is in the US. Maybe in Europe “GPS+GALILEO” might be a better option?)
I am US based too. GPS was disaster, GPS+Galileo was, believe it or not, worse. It’s ridiculous. I am so disappointed.
I’ll try GPS+Glossnas as the last resort. I am not hopeful, since Glossnas actually has a worse resolution/spec than GPS, but let’s see. Thankfully I bought this at REI and can return it.
I saw today the maps weren’t perfect, they had me running a few feet onto the lawns on the side of the streets that I run (I don’t run on lawns). It did have me crossing the streets at the right time about half the time maybe, but at other times it had me running in the middle of the street. (GPS plus GLOSNASS).
Though I’d like to have it display “perfect” tracings, TBH it doesn’t affect what I do to any significant degree. My foot pod (Stryd Live) tells me the exact distance I run, and just as importantly, the watch gives me a very accurate heads up when a turn is coming up (I run new courses in different cities pretty frequently).
I guess so far I’m pretty happy with it, waiting for some disastrous error in data calculation or presentation to ruin my experience, but none has happened yet (about a week and a half of running)!
Nedim, when you say it was disastrous, what are you referring to?
Yesterday I ran with a running group and 4-5 other people uploaded their run to strava as well. Looking at the flyby I see all lines converging on the road. There is one that is off, zig-zagging through commercial buildings some 30 feet off the the side. That one would be me. There is also one that missed the boat on a turn. That would be my track as well. $800. I paid $800 for this crap.
Coming off a 735XT this is pretty disappointing. While I realize I’ll never get the near perfect accuracy of my old trusty Suunto Ambit 2 back, pretty much every Fenix ever was a disappointment (F2 was probably the worst, F3 was not great either). I believe that the metal case is the cause — putting a sensitive antenna into an almost Faraday cage can’t be helping.
What version of the GPS version do you have installed Nedim?
Whatever the latest greatest WAS.
A week and 3-4 runs into it, I returned it today. What did it was my daughter did a lunch run with her 235 and the lines were spot on. I literally had envy, and went straight to REI and returned it. I can’t have this crap.
I did get the 935. It’s lighter and costs $300 less. Music was not a priority for me, the maps were neat, but I can live without, same with Garmin pay, easier to get phone out of pocket than enter the security code. Did I mention it is way lighter and feels like a sports-centered and not fashion device?
My wife has the F5S and on two runs we did together her GPS trace was somewhat cleaner than my F5+ (but still no-where where it should be). Since the 935 is a F5 in plastic, I am hoping the plastic vs. metal case of the 935 will help with the signal strength.
And if the 935 GPS sucks (per fellrnr, it does. I know Ray has some doubts on his methodology, but I found him accurate), well, at least I paid $500 not $800.
To follow up, if anyone is interested.
The 935 GPS is perfect. Whereas the F5+ could not hit the street, the 935 nailed not just the street, or the side of the street, it nailed the sidewalk I was running on for over half the run.
Highly recommended. The F5+ not at all. YMMV.
Hi – hoping someone might be able to help me get my watch to display lactate threshold values that it calculates from hard runs (i.e., that it calculates without doing the specific test that it sets up).
My understanding is that there are two ways for the watch to calculate lactate threshold – to do the specific test that it has you run, vs. that it calculates it “automatically, in the background” during hard runs.
I am “training by racing” 5Ks, and my HR is pretty high, for example for every step of the last 13+ minutes of today’s run, my HR was greater than 94% of the HRmax entered into the watch (that’s a pretty typical run for me).
What am I doing wrong … shouldn’t that trigger an automatic lactate threshold calculation by the watch? When I go to Garmin Express, it says , “You have no lactate threshold data for this time period” (I’ve had the watch a week and a half, have gone running 5 times with it, and four of those five times have been runs with these high heart rates for way more than 10 minutes straight).
Any hints? Thanks!
Hi Notne.
You are learning fast! Lactate threshold is the way to go. (-:
Garmin’s (First Beat’s) automatic algorithm is a little unpredictable and it won’t give you a result for each run. I suspect it needs a range of values for both pace and hr so running continually “eyeballs out” such as in a 5k may not give it the range of values it needs. I know this sounds odd as threshold is defined as the maximum pace you can sustain for 30 mins. You read the FB paper – take another look and tell me why this is so? If you wish to use the automatic algorithm first check it is enabled. Try running slow at the start and slowly building up during a race to your maximum effort. Alternatively just do the guided test (which pretty much does the same thing). Of course you don’t need either the automated or guided test. Just see what your average HR and pace is at max effort over 30 minutes. You may already have the information required depending on your 5k time.
P.S. correction – average HR during the last 20 mins of a maximum effort (or race) of 30 minutes (hr response to exercise seems to be the sum of two exponential functions with shorter and longer half lives).
Thanks for the compliment, Andrew!
I’ll go back and read the FirstBeat lactate paper in as much detail as I’ve recently read the VO2max paper (it’s been a while since I read the lactate paper).
I guess I could go ahead and do the “watch-directed” runs to get a lactate threshold, but (and I know it’s a personal problem!) I don’t want to be running at slower speeds, it just bugs me when I do it!
I thought that the ramping up of HR to max that I’m seeing in my runs (in retrospect, my eyeballs are still “in” during the first 40% of the training run, I think) would satisfy the minimum variation in heart rate required by the “lactate threshold test”, but perhaps not. (Oh, and thanks for the hint to ensure the “auto calculation” of lactate threshold was enabled in the watch, it was)
With any luck, a picture of today’s HR over the course of today’s run will be uploaded with this post. I guess I’ll try another run or so as I’ve been doing, and then if there is no autocalculation, I’ll have to decide just how much I really want to know the lactate threshold (translation: just how much I *don’t* want to perform the watch-directed lactate threshold test).
Thank you again, Andrew!
Maybe I should mention that the steep stairstep “bump” in HR at 1.3 miles was a little hill, then it was a little bit more up hill after that. Looks like my HR never recovered from that. The last 3/4 mile or so was actually downhill, I think my HR stayed high in part because I definitely am running out of steam there, “eyeballs out”, thank goodness it’s not still uphill anymore at the end because I don’t know if there’s anything left I can give at that point!
Polarise your training. If you run flat out every run you will asymptotically approach a lower level of fitness than if you mixed it up a bit with some long slow runs, tempo runs and intervals. 80 20 Running is a good read (rare in this genre). Train smarter.
link to google.co.uk..i&docid=LFFllXC3elhCKM&itg=1&sa=X&sqi=2&ved=2ahUKEwicsPv3zundAhWtm-AKHT4DDgQQ_B0wDHoECAcQFA
Garmin doesn’t say they are picky over the type of chest strap but I have only ever used a Garmin one, not out of brand loyalty but because my F3 is ANT only.
link to support.garmin.com
OK, though I’m far from the most suggestible or gullible person there is (at least that’s what everyone tells me :-0 ), I bought that book. I just couldn’t stand the idea of being sucked into a vortex of asymptotes, what could be worse!
I bought a Polar H10 chest strap long before I the Fenix 5S Plus watch. They seem to work just great together. I wonder if your comment about the Garmin strap was just informational, vs. whether you saw something in my Polar H10-obtained HR data that raised some concerns?
Thanks!
Notne, you will not regret buying that book. You can learn to enjoy running slowly, and see your Fitness increase. It was hard for me to believe, but it really works. I spent years training too hard, hoping to get the most benefit for the least amount of time. Just bad idea.
Andrew, thank you for posting that before I did.
It is also worth mentioning that I suffered frequent injuries when ramping up training. hamstring, calf, hip flexor etc…
I have not had an injury in the last 18 months with this mix of training.
You could be spewed out of a vortex towards its outer (happier?) asymptote. (apologies for over-egging the metaphor and then mixing another!)
Mr. Fenix decided to give me a Lactate Threshold today*, 160 BPM. So I guess I really do have to train with HRs as high as shown in the graph above if I want to improve …? (80-20 book hasn’t arrived yet).
My run this morning was out of the norm:
– I was sleep deprived after a day of air travel,
– I’d overeaten the night before,
– I was running in a new location, much hillier than usual for me,
and I didn’t have the mental energy to run all out like I usually do.
So maybe Mr. Fenix felt sorry for me and decided to give me my first lactate threshold value so I’d feel better!
NO. The opposite is true. You should do 80% of your running BELOW your LT. Only 20% should be above. That is the summary of the book. 20% hard and 80% easy gives you the maximum training effect. The book will prove it, with much research and documentation.
It was able to give you an estimate because you were running slower and at a wider range, with the hills I assume. Or just finally had a large enough number of runs.
If you weren’t feeling well, that probably adds more than usual error to the calc. But as you continue (begin) to run a range of speeds/efforts, it will get better.
Hi Ray,
I’ve purchased the 5X + and don’t enjoy the silicone/rubber strap.
I’ve decided to purchase the nylon nato strap from Garmin as I find it comfortable and hardy – I also don’t use the optical HR as I prefer the old fashioned chest strap, so no problems with it being covered.
My question is, what is the lense/HR made of? I’m worried that the friction of the strap would possible scratch the lense thus damaging it – my wife prefers the optical HR and usually uses my devices as I upgrade, I’d like to ensure that this one remains intact for when she elects to disposes me of the unit.
I can’t find anything online regarding the material or propensity to scratch, or even if it makes a difference in terms of the accuracy of the readings should it get scratched.
Any ideas would be a great help.
Hey Folks! Just as a quick heads up for those following along on comments…
Garmin just released Spotify support for the Fenix 5 Plus series, available for download now. I’ve got all the details including a video of how it all works here: link to dcrainmaker.com
Enjoy!
Hi Ray, Maybe it would be a good idea if you update the review to include the Spotify news. I really think that this is a game changer. I might be updateing my Fenix 3HR just because of the inclusion of spotify playback.
[I hope it’s OK to post this here … I really didn’t know what else to do (I don’t use social media) … DCR, if you have to delete, I understand.]
Hi – Anyone else having trouble registering on the Garmin forums recently?
I see they are alive and well over there with current posts, but no matter what I do, I can’t get it to accept my username/password. I’ve changed the latter a million times, tried it on three different brousers … all with the same results (it just brings me to the page that says “Login” at the top instead of showing my username up there).
And I’ve contacted the webmaster 3-4 times over the past few … months, yes! … and gotten no reply.
It’s like I’ve died and am really a ghost as far as they are concerned, and they just don’t see me.
Would anyone have the official email of a moderator or on that site I could email about this? Or other suggestion?
Thank you!
Hi – Since it looks like I may never be able to sign up for the Garmin forum (as I wrote above) … can anyone recommend a friendly, high-quality running forum where folks can ask questions and get good, encouraging answers?
Thanks!
Hi – Can someone help me with some button-ology on the Fenix 5S Plus please?
What I wanted to do was set my watch for a distance alert of 2.5 miles which I would run on streets I would randomly select during my run … then when it buzzed at 2.5 miles I wanted to activate the “Navigate home” feature so it would send me home (thinking I’d be all lost in this new town I’m visiting and wouldn’t be able to get back home easily).
The first part went fine, I programmed “RUN” to “SET A TARGET>DISTANCE ONLY”, and it buzzed appropriately at 2.5 miles. But when I tried to then go to the “NAVIGATE” menu by hitting the button up at 2:00, it instead thought I wanted to end my run (that wasn’t surprising to me as I always end my run by hitting that button).
So I couldn’t figure out how to enter the “NAVIGATE” menu while running in the “RUN” menu, to have the watch guide me home!
Any hints please?
Thanks!
PS – First “slow run” ever, as a result of skimming through the 80-20 book last night … :)
The music on Jaybird x4 earphones was adequate when I ran last week, and today too it only skipped a little on my way to the run, and when I slowed to a walk after the run. However, while I was running with a new Stryd footpod it was skipping literally every split second, so that I thought maybe the Stryd and the music were taking turns on the Bluetooth channel! Probably it doesn’t even work that way, but that’s how the skipping sounded.
I looked up the connections for Stryd, and it has both BT and ANT+. Does it always connect to the Fenix 5 plus via ANT+? I don’t see any way to check the connection. What do I do now? Give up on Stryd? Buy new earphones? Any suggestions?
A second question: for people who run outside with Stryd, is the consensus that it is more accurate for distance and pace than GPS? Should I put Always instead of Indoors? Obviously I know what Andrew thinks, and Fellmr, but I was wondering if there is any/much disagreement.
Hi Caroline!
Following with interest on the earphones/Stryd potential interaction. FWIW, I run with a Bluetooth chest strap (Polar H10) and Stryd Live … so at least in my case I think that means the Stryd Live is not using Bluetooth, since that is already taken. Now that I write that, I see that probably isn’t helpful in terms of figuring out whether the Stryd could use Bluetooth under certain circumstances.
Re: your second question about Stryd better or not than GPS for distance/pace …
I’ve used both, and found that:
1) Pace with GPS was all over the place, way up-then-immediately-way-down, in a non-physiologic way I mean, which I interpreted as meaning that it’s distance calculations were way off.
2) Pace with Stryd is very smooth, and seems reproducible run to run.
3) I’ve read that GPS is only good to a matter of meters, which I interpret to mean I could move 1 foot, and the GPS will think I’ve moved anywhere in a circle of several meters with me at the center … i.e., over short distances it could be way off.
4) I used Stryd to send me on a run 2.5 miles out, and when I returned for a total of 5 miles, I was within a few yards of the starting spot … pretty good, I think!
So, I put “Always” (like I do with my chest strap HR while running, then put it back to “Wrist” when I’m not).
FWIW, I’ve emailed the Stryd folks with questions of this nature, and they are great at answering quickly, and backing up their answers with some 3rd party data.
Anyway, I hope someone smart comes along and gives their perspective … I’m just a newbie!
PS: Do you belong to any running forums you’d recommend? :)
Just to say that I bought some of the headphones specifically recommended by Garmin for use with the Fenix Plus, and now it’s working beautifully. I wish I had seen that list before I bought the Jaybirds, but they work fine indoors at least.
Hi everybody!
So a lot of discussions have been held about battery life and optimalizations to it.
I have tried to find (also above, from dealers and online) just one thing in addition to it;
Every Li-Ion battery has a certain capacity, commonly expressed in mAh.
When i’d take a multiple-day hike with possible a 5+; i am wondering how many charges i can give from a power bank? Considering a 20% charging loss and knowing what the capacity of the battery will be, i’ll know.
So; the question is; anybody an idea what the actual capacity is? (in Ah or mAh?)
Is there an ETA for the Clever Training European availability of the Garmin Fenix 5X Plus?
Ray,
Do you know/have the chance to ask if Garmin is planning on enhancing the SMO2 features? Specifically something along the lines of what BSX/Moxy do/did for LT testing or similar applications? That would probably tilt me more in the direction of the 5X+ vs the 5+. Well, that and the longer battery life.
Thanks,
Pascal
Question regarding navigation. I have other 3rd party maps that use in my Garmin Oregon device. Can I upload these maps on this watch (is the map format compatible)? Can I also upload many tracks and waypoints? Basically, I’d like to know if this watch can replace my Oregon when doing short hikes. I often use detailed topo maps to discover hidden beautiful places (lakes, creek, etc).
Thanks
Hi
now…after 3 months … I find 5x a decent watch….the only things that kinda dissapointed me are GPS accuracy (especially in areas where GPS is a bit harder to find…near buildings, in the forest,…)…Suunto ambit 2 was much better in this area…??
and also wrist HR…it is accurate as long as you are not moving…but during activity…well it is all over the place…??
cheers
Vojko
Ray (or other users)
Are these maps good enough when out skiing to make sure you get the right turn home in a whiteout? Somewhere like the Trois Vallees is massive and a wrong turn at the wrong time could lead to a very expensive taxi ride!
No. But frankly, neither are paper maps. I wouldn’t be moving anywhere skiing in a complete whiteout in Trois Vallées (been there, done that, no thanks).
LOL, but sometimes the weather comes in and you need to get home/get into the trees! I’ve had many a happy(!) time skiing from piste pole to piste pole to get home!
Haha, true.
To be fair, for the most part screwing up in the greater Courchevel area is harder to do than at Chamonix. It’s actually a reason I prefer the Trois Vallées for skiing over Chamonix. With Chamonix you’re totally dependent on weather. When it fogs up, you feel like you could make one wrong turn and fall off a gigantic cliff thousands of feet (because, it’s true).
Whereas with Trois Vallées, you have to make a lot of wrong turns on most runs to get anywhere near major cliffs.
Hi – Fenix 5S Plus user here.
Is there any way you folks know how to customize the Garmin platform GUI in the following ways?
1) Have the display of the course track I’ve just run be color coded for HR, speed, elevation, and others?
2) Change the Y axis on the graphs so the data range takes up more of the page (right now it is compressed so much that it would take a massive change to even be visible in the display).
Thanks!
Dear Ray and fellow readers,
I’ve been using my Fenix 5 Plus for several months now and I absolutely love it. I’m using it for running and as my Bike-Computer. The routable map-functions are the main reason for my upgrade to the new version, however there is a MASSIVE problem with the navigation on the fenix, making it virtually useless when riding on the bike and following a predefined course:
Each time when there is a corner to be taken, half of the display is being covered by a massive arrow pointing the way of the bend. This is increadibly stupid and annoying, as the arrow is destroying the context of the bend by covering my recent position and the trajectory to follow. E.g. if there are two paths on the left and the watch is signaling to turn left, that stupid arrow is blocking the context and I can not see, which one of the two possible paths on the left to follow. That context of a turn is actually the whole point of having a map in the first place, but on the fenix it’s flawed.
I tried to enabe and disable every option on the fenix to turn that stupid arrow-direction-prompts off, but they always show up, when I am following a course.
So Ray and you fellow readers, did I miss one setting in the fenix’s menue where you actually can turn off that prompt or is it always showing up, when following a course. If the latter is true, Ray, could you PLEASE communicate to Garmin to add an option in a future firmware-update to turn those prompts off or to make the arrows way smaller, so they do not cover the most important positions on the map?
Thank you in advance.
Used to annoy me too. If you start at the end of the route and go the wrong way round I found the thing had a fit and showed you all the direction arrows one after the other after which I seem to recall they went away. Of course your direction little red triangle is then 180 degrees out but you might be able to live with that! Alternatively once those daemons have been exorcised head back the right way round. I think it is to do with how the user interface pushes views on top of other views. From a software development PoV this is good as you don’t need to know anything about the view underneath. It would be better if the view supported an alpha channel so you just saw the arrow overlaid on the underlying view. I don’t think the graphics chip is that sophisticated but good graphics is power hungry.
I can cope with the big arrow, what I struggle more with is that, while the GPS is clearly tracking my route very accurately, the final “turn now” instruction is often about 20 metres late.
Most of my routes are automatically created by Plotaroute. Suppose I could tweak them so that all the turns come 20m early, but wondered if anyone had any suggestions?
Same here. The big arrow is blocking my view of where to go. Also, these black prompts mis many of my turns in Strava or komoot created routes. Therefore I now cycle (race cycling) with my screen continuously showing the map and only two other useful metrics.
When the ‘navigate to start’ function is used I do get proper notifications, in map arrows instead of a black overlay and even street names like on the edge series. How can i get this type of navigation for my own routes? Using the ‘map’ instead of ‘follow course’ options leaves the watch in endless calculation mode even for 5k routes I’ve tested.
i am looking for something that can show me my HR WHILE swimming. Not to download later, but to see my HR doing my laps. I would like this device to be a watch that I can use for other functions, though any wrist wearable would work.
Can the Fenix do this? If not, is there a device that can, and what is it? Thanks.
V800 paired with H7 or H10 hr strap using 5kHz transmission. Nothing better at present.
Andrew, thanks for the quick reply. Not sure of these devices. Assuming H7/10 is chest strap, but don’t know manufact, and by V800, is the the polar watch for about $300?
I guess a wrist device from fitbit/Garmin etc that does HR won’t work while swimming, not enough contact area, for long enough, or water between, etc?
I’ve been looking at the Fenix series for over a year but haven’t jumped the gun and bought one yet. I see the $150 off that started this week. I am looking for the best watch for ultra trail running and more specifically races that last 20-40 hours. I can charge during the race but don’t want to do that many times. I like the Bluetooth technology for text and email alerts. Mostly looking for an accurate and dependable gps watch for training and racing.
I just saw REI had $150 off Fenix 5s. I don’t know if this is a promotion from Garmin for everyone or not.
Ok, I just posted that the Plus models are now on sale for $150 less, but older 5()s are starting at $399. For instance a regular 5 is 399, the 5Plus is 649.
You don’t get music on the phone, or nav. And no sapphire.
But I don’t need music. I have a bike computer for nav. So what am I really giving up for the $250 extra. Is it worth spending that extra money?
Yup, full details on the Fenix 5 sales here: link to dcrainmaker.com
As for the core differences, if you don’t care about music, maps, or contactless payments – pickup the original Fenix 5. :)
Also, the 935 is NOT included in this sale as far as I can tell. It is only for Fenix 5/5+ models.
Wonder why though.
So, you would recommend the Fenix 5 even with the GPS accuracy issues and ANT+ sensor connectivity issues? Or, have those been resolved somehow?
No resolution on ANT+ sensor issues, so really just depends on what you use. If you use Stryd, I’d avoid the Fenix 5/5S (5X is fine). Most other sensors haven’t been a huge deal though.
So the GPS is similar on the 5Plus as compared to the 5? I have read that there are still some issues with the GPS… I know you originally mentioned that it was equivalent to the 935, but has anything popped up since?
You also mention in the last sentence that you may switch our your FR935 for the Fenix5Plus. I am considering purchasing one of the two. I mostly run, but enjoy testing new routes and the ability to create them on the go with the Fenix5 Plus entices me. What would you suggest?
I haven’t seen any meaningful issues on either (except openwater swimming). Certainly like any GPS I can find the odd track here or there, but nothing earth shattering or systematic.
I’ll mostly use the Fenix 5 Plus as my daily driver when I’m done with the fall sweeps of watch reviews. Right now my wrists are pretty full of other test activity trackers. :)
Hi Ray,
Any news of the battery problem? My watch kills the battery after a workshop out.
It’s fine during the workout but drains it after.
I have understood that this is a major problem.
Have you heard of this? And do you know if Garmin is working on this?
Thanks in advance for replay.
Love your site by the way!!
Haven’t heard of that. Sounds like something is running a process killing the battery. Any chance you use any Connect IQ watch faces or other apps?
I’ve not had this on my Fenix 5S Plus, but have heard of others having it in their Plus series watches.
When I first got my watch, as soon as I got back from a run, there is WiFi sync of my watch to Garmin and Stryd. I turned off GPS and chest strap HR (replacing it with wrist HR) right away, and Stryd Pod, so it doesn’t keep searching for those. Is your watch searching for something all day? I don’t use music.
I really don’t use it for much of anything during the day except time and wrist HR, so it starts out each morning pretty near fully charged. Lately I wouldn’t notice it even if it were happening, because I plug it in immediately to sync when I get back from a morning run, and then leave it plugged in while I shower (so it’s charging then), so it never really has a chance to drop.
I wonder if your charge drop occurs at any starting charged level, or is more when the level is farther from 100% charged?
link to forums.garmin.com
Here is a thread with alot of people having this issue?
Help with buttons please – I lost a run last night …
“Navigate – Saved Locations – Go To”
I had previously saved the location for the house, was about three miles away, and wanted the watch to direct me home. I called up that location by pushing the above buttons, waited for it to finish “Calculating”, then hit start. I waited for the Green arrow, and started running.
When I got home, there was no distance data saved! The display on the watch was “–miles” and “–speed”. It did save the time duration of the run …
Two questions please:
1) Is there any way to manually draw the route into Garmin Express, “this is what I ran last night”? I know the time it took and so I’d at least get a rough approximation of the run into Garmin Express.
2) Did I do something wrong in my button pushing last night? Does anyone else use the “Go To Saved Location” feature? It sure would be handy if I could make it work!
Thanks for any help!
If it said “Speed” and not “Pace” my initial thoughts are it used a “Bike” activity, instead of a “run.”
If that’s the case, the distance didn’t track because it’s possible you never went above the speed threshold for the “Bike” activity to count it as movement.
Ah, that makes sense, Steven, thanks.
I wonder why it defaulted to bike, I’ve never ridden a bike as far as it is concerned. I’ll have to check it out!
Thanks –
Which watch is more accurate about distance and current speed/pace the suunto 9 baro or the Garmin fenix 5+?
I don’t think either are great. If you want instant pace and accurate distance then a foot pod (calibrated) is the way to go and Stryd is probably the best. You could also dabble in training with running power with the Stryd.
thanks, i think Stryd is a little over kill
A few days ago i installed the new update for the Fenix 5, since then it stopped to connect to my polar bluetooth heart rate sensor. I contacted Garmin and they told me that the watch was never designed to connect any device except smartphones via bluetooth and that they might have fixed that “bug”.
Do you have any idea, why my sensor stopped working and could the guy from garmin be right?
Garmin and swimming?
Why is it that there is no auto pause for indoor swimming? My three year old suunto ambit three does auto pause for swimming quite well. Its not called auto pause, when your swimming sets of 100s or 200s it knows when you’ve stopped and gets the interval distance right. My Garmin fenix has the interval distance and the total distance as the same. Unless I press the back button every time I rest between sets. It seem ridiculous that you have to remember the back button each time.
I know people have been asking Garmin for years, what’s their answer for not adding
this feature to the Fenix series?
How about open water swims displayed in yards on their watch. Why can’t this be changed to miles? Why is Garmin indifferent to swimming?
Hello, and thank you for the great reviews.
I’ve been unable to find an answer to a rather simple question: Is it possible to differentiate via either sound or vibration between different alerts? That is, if one’s to set a pace alert, as well as a heart-rate one, with navigation alerts turned on, would it be possible to tell which alert just went off without looking at the watch?
Thank you!
AJ
Great review – thanks! What’s the easiest way to get an audiobook from Audible onto the Fenix 5 Plus? I know it has to be done on the desktop, but is there a streamlined way to accomplish this?
I’m interested to buy the 5S Plus now, considering the current discount. But I have a concern about battery life when using gps. The regular or the X one will get more hours, but the 5S better fit me.
Do you think it’s good enough for a full day of hiking? What about doing hiking during the winter (cold weather)?
I know I could use Ultra Track but this feature doesn’t seem to work well, from what I read in other forums (too weak accuracy). Is there a way I can change the gps mode and choose the frequency between track points to get better battery life while keeping a good accuracy? If so, can I still use trackback feature?
Also, any rumors for new watches on the upcoming CES? I would like to see Garmin offering maps on cheaper watches. A Vivoactive 4 Map would be great!
Did I understand correctly that open water gps accuracy is now OK after gps firmware updates? Quick reply would be highly appreciated since black friday deal ends in 24 hours.
Thanks Ray for best reviews as always..
Sorry, missed this. But no, it only seems barely better in my tests. Still kinda sucky.
Thanks, so made right choice to wait little more to see that OWS really works before next summer season.
Sooo… if i’m correct, f5 plus is still vastly inferior to f5 in outdoor swimmining? :-(
i want to jump in and replace my ageing f3 (without HR) and would love to have routing maps (for trail running) and i don’t care about garmin pay and music (and I don’t like the design of 5X – i find 5X plus nicer)
of course, there is a question of price for a non-perfect product… i can get f5 for 350 EUR, while f5 plus (non sapphire) for 620 EUR… maybe i should wait for next black friday… :-)
Once again latest update claims to have improved open water swim. Would love to hear from someone who can test if true…
I am on “Software is up to date — Version 6.0.0.0” which I understand is the latest available software update.
I did the Ironman 70.3 Indian Wells La Quinta with it in early December and the result was still appalling: It tracked a total of 50m on a 1.9km course!
So no, definitely not working for triathlons (hopefully yet)!
Has anyone else had issues with the 5X plus rebooting constantly? I see lots of comments about it on the Garmin forums and no solutions. Contacted Garmin about it and no solutions there either except returning the watch. Seems its related to syncing with the Connect app.
Anybody know if the Fenix 5 S Plus can receive data from an ANT+ spin bike?
My gym uses the Spinning Blade ION and according this site “when paired with a compatible device, the ION computer will also broadcast a data file to the device that will record the ride data, including ride time, power, and kilojoules.” According this page, the Fenix 5S Plus is a compatible device.
However, I cannot make my Fenix pair with the bike no matter what I try.
Anybody got any ideas? Thanks!
Any
Oops missed off the website:
link to thisisant.com
I’m looking at moving from the 935 to the 5+, only because I’ve been through four 935 watches! The altimeter broke after a swim each time, with two breaking the OHR also.
I do a lot of hiking and am worried the 5+ battery life isn’t long enough for me.
Greg Hilton, I think you have had the same problems as me. Did you upgrade from the 935 because of the many units that break? I guess it’s bad design rather than user error. I’m a small girl who just swims sometimes so i want this function to work properly. Your 935 tracks look good to me now. How long as your units lasting?
Frightened to shell out £650 if it’s gonna break whilst swimming.
Garmin and swimming?
If Garmin has such a deep bench of developers why is it that there is no auto pause for indoor swimming? My three year old suunto ambit three does auto pause for swimming quite well. Its not called auto pause, when your swimming sets of 100s or 200s it knows when you’ve stopped and gets the interval distance right. My Garmin fenix has the interval distance and the total distance as the same. Unless I press the back button every time I rest between sets. It seem ridiculous that you have to remember the back button each time.
I know people have been asking Garmin for years, what’s their answer for not adding this feature?
I have the original Fenix, believe it or not. It has been replaced once with a refurbished unit from Garmin, but it’s been a steady companion for years. I use it kitesurfing, mountain biking, and road riding trips in Europe. I love it for travel, battery lasts ages and I don’t worry about it getting ripped off my wrist thanks to the subtle design. I think it might be time to upgrade! I’m torn on sizing. Do you know how these sizes compare to the original? Honestly the original was a little big for my relatively small frame (5’11” 155#) and bulges out of my wetsuit. 5X would be way too big I assume, but should I go all the way down to the 5S? Or has the medium size shrunk compared to the original, thanks to advancements in the tech? Are battery lives any different between the 3?
going to answer my own question in case anyone is interested. The original fenix is 49mm x 49mm x 17.75mm. Measured using calipers. So the new Fenix 5 47mm is quite a bit smaller at 47 x 47 x 15.8 mm.
Hi DC dont know if this was answered or not but does the fenix 5x plus have MGRS / 10 digit grid for navigation?
Hi James. Yes but the Fenix 5x plus does not have sufficient GPS accuracy to pinpoint your position to within a meter so the 5th digit of each …ing is not meaningful.
Thank you for the great reviews and forgive me if this has already been asked as it would make sense for a multi-purpose watch. How do you get the unit to pick up the Garmin Radar on non bike mode activities such as running ? There are many back and roads mountain roads that people run on with the occasional car…it would seem beneficial if you could run with the radar attached to a running pack and get vibrations on your watch…it would seem that this would be a minor programing tweak.
Hi
Can anyone with one of these watches that is paired to their iPhone …..
When you set the music source to “Control Phone” can you do any more than Play/Pause/Skip etc i.e. can you browse and select the music/podcast/audiobook to play on the phone via the watch like you can in any modern car
i.e. you get the same menu structure you see for music/podcast/audiobooks that you have loaded onto the watch
Thanks
No, you can only control whatever is or was playing on your phone. No ability to search other audio sources.
I have bought a Fenix 5x Plus and I have tried to transfer to it one song in MP3 from my computer. I have not been able to do it. I have tried for quite an amount of time. I am probably doing something wrong. A brief guide from any of you to transfer an MP3 from the computer to the Fenix will be more than welcome.
Thanks and happy new year!
José
I purchased 5 Plus in November, have been trying out for about a month. GPS is a problem at this point: works in Davis, CA (my home) sort of, but won’t work at all in Tahoe City, CA. When I try to look at maps, all I can see is the same map of Davis, CA. Altimeter keeps shifting and is usually incorrect. Still working on distance measurements, calibrating, not settled yet. So a work in progress, I don’t have an answer that’s definitive in response to “Is it worth the money?”
Mike Harty
Hi Ray, I bought a Fenix 5X Plus in Mexico by Best Buy Mexico, the watch has loaded USA and Canada Topo maps.. I sync the watch with Garmin Express And it doesn’t load Mexico Topo maps, I called Garmin support and they said Garmin units sold in Mexico don’t include Mexico maps.. that’s sounds ridiculous… I just hope the guy I spoke to didint have a clue… so I can’t use navigation, maps or trend lines… what would you recommend me to do?
If I’m reading your question correctly, the Mexico maps while are included (very strange indeed!), but are still downloadable from the Garmin website per your screenshot.
Are you trying to resolve the issue of being unable to download the Mexico maps and subsequently upload to your F5+? Or are you trying to resolve the issue of Mexico maps being included by Garmin in the first place due to the location of your purchase?
Sounds like both may be issues for you but the former calls for Garmin tech support and the latter, if true, I’m not sure if there’s much you can do about it aside from sending in an official feedback/complaint.
typo – I meant to say in that first sentence “…the Mexico maps are NOT included…”
Hi – in process of upgrading to a 5X Plus from a 5X – want the better GPS features as i run a lot in tree covered areas – and get drop-outs – which happen less on a friends 5X plus. Two questions. First, is there a reason that there arent any bundles around? When i bought my 3, i got an HRM Run bundle and the 5x with an HRM Tri bundle. I dont see any? I like the strap as i do other workouts 3x a week and it is better for keeping track. Second – i see a lot of demos with the running dynamics pod that goes on the waist – as opposed to the garmin footpod. I know the FP works – but does the waist bound pod work better with the 5x plus? thanks.
My Garmin Fenix 3 has power drop outs with my left sided Stages power meter. Does the Garmin 5 Plus have the same issue with Stages power meters? Thank you!
Hello Ray,
I’ve had my 5x+ for some time now and love it.
Lately, I have been using it to link up to a Wattbike with connection to the bike’s sensors proving to be simple. the problem however is I am getting occasion spikes in power, crazy spikes up to 43000 watt, I imagine this is a dodgy reading from the bike itself, but is there any way to have these spikes removed from my data once I’ve uploaded it?
I’m getting exactly the same issue when using my P1 pedals, but only via Garmin. On Sufferfest this morning I connected all my sensors, powermeter via my 4iiii Viiiva etc. Max power in Sufferfest 718w. I also recorded the set with my Fenix5x+ – max power on there of 32,875w.
Riding outside I get the same power spikes – I tried taking the batteries out of my P1 pedals and leaving them for a day or two. But with no change, so I suspect this is a Garmin thing rather than a pedal thing.
That is a known and acknowledged bug with the 6.0 firmware (check the Garmin forums). Upgrading to 6.51beta solves the issue – and didn’t break anything for me.
What are the 3rd party maps that are supported on this device? I am planning a hike around Mont Blanc which includes 3 countries and will like turn by turn features on my watch.
I have to say that was one of the best gear reviews I’ve ever read!!! Really in depth, answered every question… Even after researching these watches for two days myself!
Any links to Canadian websites to purchase this, so I can support your website?
Has the Fenix 5x after the recent updates against the Fenix 5x plus still disadvantages, apart from shorter battery life, music, Garmin Pay, PulseOX and Trendline popularity, particularly concerning GPS, heart rate measurement and map display? In other words, is the Fenix 5X hardware and software not as powerful as the Fenix 5x Plus, despite the latest updates?
I have a number of Garmin devices and recently purchased the Fenix 5 plus. With the 10% discount I purchased the European maps as I thought they might be ‘better’ than the free ones. Well my new watch with over 8 gigs of free space couldn’t fit them. How much space did I need for those?.
So I tried to load them on my Garmin 1030 as I thought that would have space. I then realized that they are locked to 1 device and not to the account. IMO that is just a bad policy I was hoping to use the 1030 while I am on the bike and the Fenix for all other times.
I was able to return the map and Garmin will not be making a sale on any maps. Garmin should lock them to the account and not to the device no way am I spending $100 for two devices for the same map.
So am I missing anything going with the free maps?
I was looking for some information around “virtual partner” (vp). I have a 910 which has vp but is an average not “real time” comparison. Are there any tri watches that allows for a real time comparison of your effort, i.e. I want to know if how my current pace compares to another or standard at any given time. Thank you for all your efforts around your reviews.
PulseOX? I wonder if PulsOX can help me. I have just started to swim, bike, and run after several months of down time just walking due to lung inflammation. We had thought I was OK a few months ago and as soon as I started running I was right back to where I started. A CT Scan is the only indicator and how I feel. I can’t tell until it is too late and I did too much. Anyway I wonder if PulseOX will indicate anything? Can I figure out normal trends for me? When I was really bad my lung test (I don’t know what it is called or measures) came back at 70% normal adult. So maybe I can see something in pulseox before it is so bad I go get a CT scan to confirm what I already know at that point. I really wanted the smaller watch and not black but thinking about buying it just for this feature. If it helps at all it is worth it to me.
Continuously wearable oximetry is pretty new so I doubt there is much of an evidence base yet but I suppose in principle you could establish a baseline. You might get an early warning of deterioration in the same way that athletes get an early warning with an unexpected increase in resting HR. How useful it is is going to depend a lot on the type of lung problem. If an obstructive problem (like asthma and COPD) probably less useful than for rarer conditions such as pulmonary fibrosis where there is a tendency to markedly desaturate with exercise. I hope you do not have the latter.
Thanks very much. They think it is just something I inhaled and will get better. I ordered the device from Amazon and will start testing and comparing with my wife. Still thinking about the fenix 5
Ray, GREAT review, thanks so much for posting this.
I read somewhere online that the 5X+ has an enhanced optical heart rate monitor, vs 5+ and 5S+, providing higher accuracy and more detail. Almost no reviews I’ve found mention anything about it. I’ve had irregular heart rate issues a few times over the years so if the 5X+ does in fact have a better sensor I’d likely go for that one because it should work better with Cardiogram app… otherwise, the 5+ is probably the size I’d want.
Do you know anything about this claim of better HR sensor on the 5X+? Do you have any additional info you could share?
Thanks.
Nah, it’s the same sensor. It’s just that adjacent to it is the PulseOx sensor. Once you get to Marq, those two are more cohesively merged together.
In fact, most would argue that the 5X+ has worse optical HR performance due to its size (larger watches bounce around more due to weight, which strains optical HR performance).
Ah, OK, cool. Thanks Ray.
Hi Ray, thanks a lot for all your digging…
If I connect my Stryd as PowerMeter & Footpod it shows “searching” in some IQ data fields (Run Power)
If I connect it only as Footpod it is OK.
How do you connect it ?
What is the difference between the “Fenix 5x Plus Black band/hardware” and the “Fenix 5X Plus titanio DLC”? Is it only the band, or also the watch in made of titanium?
I can live with all user’s experiences. But I own a fenix 5x, and it is, without competition, the worst instrument I have ever owned.
GPS accuracy : tragically bad, on running 0.5km error on 5 km is very common, worse as well. Cycling used to be acceptable, but since a few weeks, i loose 2 to 3 km’s on a 100k ride, routinely. Just a crying shame for such an expensive device.
HR is ridiculously bad, seriously, replacing HR by totally random numbers would not even worsen the “accuracy”. There is no relationship whatsoever to real heartrate, however, wherever I wear it.
Cable to connect to PC is of deplorable quality, keeps connecting/disconnecting continously, big problem to charge device.
Bottomline : over 500€ totally crap product, in my honest opinion.
Johan, do you own the old Fenix 5x or the new Fenix 5x Plus?
it’s interesting how long it will last.
My current Fenix 3 dead (turned off for ever) after 3 years of usage. If it has limited lifetime (hardcoded), then maybe it’s not worth that money.
What do you think about that?
Has there been any improvement on the OWS swim capabilities of the 5x+. I asked Garmin about it at the last two Marathon Expos I attended (Boston, Louisville) and in both places they denied there was any sort of problem. One tech rep said there may have been an initial problem that was solved last year. I was trying to decide between the 5x+ and the 945. The 945 looks horrible and cheap so I would prefer the 5x+, but not if it has not been fixed for OWS yet.
Hi Ray,
Do you know if Trailforks mapping is on the horizon for the Fenix 5 Plus series?
TIA
I’m not aware of any plans there.
Dear Ray,
I need your help, please. I used to have the Fenix 5 Plus, but it broke. Now I’m getting the Sapphire version, but it will have US-maps only. You mentioned that it is possible to get the EU-Maps somewhere else. Can you briefly describe where and how to get the EU maps on the US-watch? I’m confused, as there were several maps synchronized on my old EU-watch (see picture).
.. If you are not willing to publicly tell how to do that, could you describe how to BUY the missing EU maps.. On the garmin page I am totally confused which map(s) i should get to have the same mapping-capabilities as on the EU-watch.
Thank you!
Alexander – go there for all the info on loading maps legally and at no cost!
link to dcrainmaker.com
Wow, thank you very much, Greg!
Hi – Can someone help me please to set up my Fenix 5S Plus so I can read texts?
I did a search for “text” in the .pdf manual, and none of the 17 occurrences described how to read texts as far as I can tell, just how to send them.
I do have it set up to show me who’s calling me … but adding the incoming texts would be amazing.
Thanks for any help!
I just purchased a Fenix 5S, I had bought the middle size Fenix 5 and had to return it as it was banging the crap out of my wrist boney prominence and got a burn as well. I thought I would try out the smaller version this time thinking newer model, got the first one last time…they must have ironed out some issue. Again after 2 days of wearing the watch I have a burn on my wrist and continually the HR sensor feels warm (just like last time). I have turned off the hr sensor for now. Contacted Garmin support and it seems to be getting any traction within Garmin product support. I called today was on hold for 30 min, called left call back number and they said they would call back within 30ish min and that was hours ago (no call). Wondering if anybody else has had issues with HR Sensor burn? Google search has a thread within Garmin site and clicking the link it has been deleted. I am not a Garmin hater, actually the exact opposite (6th Garmin running watch, Varia, Edge for biking), I really do like their products… But their product support on the other hand…..
I have been a loyal and active forum user and poster on forums.garmin.com. For years. 600-700 posts until now.
Naive people think that the whole change was about a new forum engine, but having considered that this sort of engine change happened not a long time ago I do deem that it was the most political way to get rid of the fair, but negative feedbacks on Fenix 3/HR and some others.
They have the right to do that, they pay the bill to maintain the forum. But they are so miserable…..
The only problem with that logic: It also gets rid of all the help and positive feedback too.
Garmin doesn’t care about the Fenix 3/3HR. Seriously, nobody there cares about that these days. In the software development world (Garmin or otherwise), 4 years is a lifetime ago.
Hi, I would like to know how the Fenix 5 plus manages the WiFi connection. I would like to know how it turn on and off the connection. In the owner’s manual (link to www8.garmin.com) is not clear if it is possible to turn off the WiFi connection. Does the WiFi connection is always on in background? Is there a way to turn the WiFi connection off?
Just looking at mine (took advantage of the sale to replace my Epix) it looks as if WiFi is usually off and you have to force it to make a connection, because the first thing you see is “Connect to Wi-Fi” and if you choose that it says “Searching for Wi-Fi network”. But you can always go to extremes: Settings->WiFi->My Networks->->Remove. I don’t know what happens when you have “Auto Upload” on (as I do), but it doesn’t seem to be a big battery hit at all. So personally I’m not going to worry about it.
What I don’t understand is when the WiFi is turned off since there is no “turn off” option in the WiFi menu. The owner’s manual states “The device reconnects to this network automatically when it is within range” and this makes me think that if there is some network added to the list of saved networks the WiFi is always on. I don’t know if not adding any WiFi network ensures that the WiFi is always turned off.
In short, I don’t need the WiFi connection and I would like to be sure that the WiFi is always turned off. In case I use the WiFi, I want to turn it on only when I need it and I don’t want the watch always searching for a WiFi network to connect.
Thanks for the overview! I just picked up a Fenix 5 Plus for adventure racing and your breakdown of the various models and their capabilities was the best I’ve seen so far. I’ll definitely refer back to this post for useful tips as I get to know my new device!
youtube video under “The Basis” show unavailable.
Just got this watch, that would be handy to change some settings.
Hi Marc – YouTube was actually down yesterday (for large portions of the world), there’s a bunch of news on it. That said, it’s all happy now. Here’s that video again: link to youtube.com
Anyone using fenix 5x still watching this thread? My watch is messing the crank length on my be pro power meter. It is setting it to 208mm making the power measures unreliable. Check your power meter guys and get back to me!
I’m not sure if you covered it or someone else posted it but the 5x plus won’t work with Garmin Express on a Mac. Garmin Connect sees it and allowed me to make changes but when I want to update or install watch faces I must use my Windows box or connect via my Android phone.
Apparently the USB format change to allow Spotify and other new goodies prevent it from working with MAC’s until they make a change. I’m sure that won’t happen for a long time.
ej
A few months with a Fenix 5plus and this really is the most money I’ve ever paid for a totally garbage product. The GPS tracking is so terrible that it’s unusable. The HR sensor is hopeless, too. Bluetooth connection to my phone is capricious, at best.
Here’s a DCR Analyzer set of a backcountry skiing trip I did last weekend. The Fenix is the purple line, the other line is from a Garmin handheld GPS device.
link to analyze.dcrainmaker.com
Nearly 2km short is one thing, but look at the track! Thank god I don’t have to navigate with this worthless watch.
That seems a pretty poor track, did the watch lock on with a green ring (?) before you set off?
yeah, was all green.
Hey DCR, love the content.
Quick question, which maybe you’ve had a lot.
I’ve stuck between a really good priced Fenix 5S or making the £150-200 jump to a Plus. Is the jump really worth the wedge? I see Wifi functionality being a point that concerns me, but would you consider it a real problem considering most people carry their mobile with them or at least nearby?
The other features aren’t really deal breakers for me, so its really whether the wifi functionality is that much of a benefit?
Cheers
Andy
Dear Ray,
I have the Ultegra R8050 Di2 on my bike and the D-Fly-thing. I learned that one could remote control the Garmin Edge-devices via the Shimano (hidden) Buttons and that feature is GENIOUS!
.. But I am using my Fenix 5+ as my bikecomputer and I did not find a way how to remote control my Fenix via the D-Fly setup. Did I miss something or is the Fenix not supported for that feature? Are there any plans to change that?
Ray, is there any possibility to ask Garmin if they could add the Shimano D-Fly-integration to the Fenix 5+, like they did for the Edge-devices? Thank you!
As a solo back packer in areas with very little cellular service I am interested in the Tracking and Safety feature of this watch. before I make a purchase I would like to hearing from people that have used this feature on the 5 plus or have great knowledge to share.
-How many phone numbers can you add to send your location to when this feature is used.
-Can you add a message to the GPS location when it sends it
-How long does it take for the text to be received on the other end.
-Is there a service charge to use this feature
-How many times can it be used in a day/week/year?
– I am looking for something that I can send my camp location to my friends and family daily by using the feature 1 time and then if I have an emergency, I can use the feature 3 times in 5 minutes to let the contacts know that it is urgent and not just my camp location. Will this watch do that?
As a solo back packer in areas with no cellular service I am interested in the tracking/safety features on the Fenix 5plus. How many phone numbers can you enter to send your location text too? Can you add messages to the text or is it just your location? How long does it take for the message to reach its recipient? Is it Satellite based or do you need cell service or cell phone? Is there a service charge to use this feature? How many times can it be used in a day/week/month/year? I am looking for something that I can send my camp location to my friend and family daily and then send the same location 3 times in a row if there is an emergency. Can this watch do that?
What do we think the odds are of a fenix 6 having a bigger screen ? … it’s a bit small compared to the apple watch 4
Had a look in a store that had the Marq collection last night…not bowled over by any of them for the 50% premium.
The one I thought looked best was the normal 5x Plus in subtle grey with the real leather band …. although the band is seriously wide in leather :)
I think the Fenix 6 has to have a battery that can last as long as the Suunto 9 and Coros watches to stay relevant
Contrary to what you state in the article, Garmin fenix 5 series watches are not the only ones with color maps. There is also the still awesome, but less esthetic, Epix : )
Yeah, in that line item I was referring to the fact that only the 5X (and not the other 5/5S units) had maps.
RIP Epix.
I am trying to choose between 945, 5+, and 5X+. I would prefer the 945 due to lighter weight (coming from Ambit3 Peak but watch only syncs via cable now, drives me crazy; app is still terrible). Have the battery issues been resolved for the 945 and 5+? Ambit3 Peak battery is still outstanding. Any input on battery performance and firmware updates to resolve would be appreciated. Thanks Ray, reviews are superb.
Hi Ray!
Hope all is well.
Yes, the purchasing of maps for different areas is / has been frustrating for me.
I have purchased (and loaded) additional maps for my Garmin Edge in the past with no issue.
I purchased an additional TopoActivity Europe Map for my Fenix 5 Plus and it’s telling me (in Garmin Express) I have no space to install. So now I have purchased additional maps for nothing? Do I seriously need to uninstall North America before traveling to Europe and is this even possible? Any thoughts on how to get both installed?? The watch is new- I can’t have too much installed that it would not allow for the Europe map to be added no?
Thanks for any insight!
-M
You don’t need to uninstall the existing maps unless the bits you want to install are too big. In which case, yeah, it’s not ideal.
You could try and install a smaller portion, but I haven’t tried installing the official/paid maps in a few years, since I tend to use the free map option (even on Fenix): link to dcrainmaker.com
Do you think the maps “baked in” to the Fenix 5X are good enough to get me thru hiking the Alps? If not- I don’t see where to install (what folder) on the Fenix 5 the maps I get from the site you referenced. Was hoping to install the TOPO Europe maps I purchased from Garmin but they won’t fit (no room) ——> wish they would have mentioned that before I purchased…… grrrrr.
Hoping maybe I can select the few areas I will hike and install those somehow to the Fenix 5.
Fingers crossed.
Or maybe I don’t even need. I think I will- device purchased in the USA.
Are you using a Mac? If so, Android File Transfer might help a little. It allows you to see and manipulate (you can copy and delete) the file system on your watch, and you could (carefully, since it’s not clear what’s what, so copy everything you delete elsewhere) clear some space for the European maps. It’s really annoying that no Garmin software besides Garmin Express can “see” the watch. Can’t use MapInstall to install pieces of maps or put on third party maps. Can’t use BaseCamp to create routes and drop them onto the watch. (“Garmin” mode almost works but then BaseCamp throws an error while showing my 5+ in the device list and the watch never mounts on the Desktop.)
As for maps, I really doubt that the included maps have anything more than the outlines of countries and possibly major highways for Europe. I bought UK Topo’s from Garmin for a trip next month, which fortunately were only about 1Gb so they easily fit. If this were a normal (non-music) Garmin watch you could simply use MapInstall to install the areas you’re going to but you can’t with the Plus series apparently.
As Paul noted, the default US maps are definitely not good enough for hiking in the Alps (trust me, been there, done that, it’s totally useless).
They’ll basically just show perhaps Geneva and the border of France/Italy/Switzerland and maybe a single highway through the mountains. That’s it.
Here’s today’s post on how to install maps on the Fenix 5X though: link to dcrainmaker.com
A quick update from pocket-lint (Amazon).
link to pocket-lint.com
I really need your help here! After saving for a few months, my girlfriend gifted me a Fenix 5 Plus. Prior to that, I had been wearing the Fitbit ionic. Unfortunately, I have had major issues with the accuracy of my Fenix 5 Plus heart rate monitor when doing non-steady state workouts. My issue specifically is with Cardio training exercises I have done where I have noticed that the heart rate, as well as the projected calorie burn, were inaccurate. To confirm my finding, I initially did the same interval workout I have done using my old Fitbit Ionic and saw a major delta in the results. I then did the same workout a few days later and wore my Fitbit Ionic on one hand and my Fenix on the other and saw a delta of at least 20 heartbeats per minute and a calorie difference of 120 calories, with the fenix underreporting. Given that my workout involved exercises such as burpees, and my heart rate on the Fenix, would report a heart rate as low as 75 to 88 bpm, it was clear which watch was accurate. I have been very disappointed as I saw the Fenix as a major technological upgrade from the Fitbit Ionic. I don’t understand how a product like the fitbit ionic that costs $200-$300 less can be so much better here.
Have you had a similar experience? And do you think this is a known issue for Garmin with plans to resolve it (software upgrade within the series, etc.)? I don’t want to return this watch because of its many features, but I am not sure if I can justify keeping it when it is lagging behind its more budget-friendly competitors in the basics.
Hi Ray
Awesome review, thanks!
Just one question – if I use my edge 520 for recording rides (which are then saved to garnim connect) will they sync with the fenix so that all my activities are also on the watch?
Cheers
To a certain extent. The track itself isn’t sent, just a summary. But it does sync things like VO2max and Training Load and Status. I haven’t used my 5+ today but now that I’ve synced it it knows the basics about the mountain bike ride that I recorded on my Edge 830. It doesn’t have any of the (weird) MTB metrics that the 830 produces (“grit” and “flow”) and it doesn’t have the track or the elevation profile.
It works the other way, too. The 830 knows the basics of the (rare in the summer) activities I recorded with the 5+ and the one ride I recorded recently with my Edge 1000.
With regards to climb pro (I have a 945, but you cover it here so thought it best to ask here)…
It annoys me… I find that when I hit a climb section, the screen defaults back to screen 1, going black to indicate I’m on a climb. It would make sense if it went to the climbpro screen, but it doesn’t. If I’m on the map screen, this is annoying as I now need to scroll back so I dont get lost. It then goes back to screen 1 AGAIN at the end of the climb -more scrolling back for me. I like the idea, and want to see the climbpro screen, but only when I want to go to it manually.
Is there a way around this , or am I stuck with this annoying behaviour ??
Hi,
In a few weeks I will run a marathon with this watch. Is it possible to insert the desired finishing time and that the watch will monitor/provide feedback whether you are to slow or to fast (and how much)? It is possible to calculate this in your head, but I think my mind will be somewhere else.
Best regards,
Joost
@Joost
you need a special data field like Race Pace and so many others.
I use RunPower by FlowState
My Datarun plus and premium datafields have this functionality as well (I call it required pace). It gets recalculated every second. Als the estimated time of arrival and deviation of a desired finish time are available, they can be calculated based on the average pace or the pace of the last completed lap
I currently own a Forerunner 920 XT and read through the review of the Fenxi 5X an was wondering. I feel like my 920 XT isn’t holding it’s charge like it used to being 5 years old and was wondering if there’s any reason I shouldn’t upgrade to the Fenix 5X. I primary Run and Cycle and am looking into getting power meters for my bike, I’m prepping for a full marathon and want to get into doing Tri sprints.
Be aware that there is a newer generation of Fenix (6) out that have new features link to dcrainmaker.com. But a 5X+ can certainly pair with power meters and do running and swimming and a host of other sports listed above. I have a 5+, and it’s fine for what I use it for (cross country skiing, hiking, other general use). I don’t run, so I can’t say anything about that, and for cycling (road and mountain) I use an Edge 830, although on occasion I bring my 5+ along and it can do almost everything the 830 can do (aside from being easily visible during the ride).
I’m stationed in Japan I saw a 5X Sapphire for $300 so I ordered one, worse case is I willn’t like it. I saw the Fenix 6 but the exchange only carries the Fenix 6 Sapphire, 6S and 6X Sapphire. Convincing the Mrs that I need a $719 is a hard sell, but $300 is much easier.
Ray,
Wonderful reviews all of them! I am just curious if the 5X works with the mapshare feature by itself or do I absolutely need to get a inReach mini to go with the 5X? I am still on the 3HRD, which I still love, but been very tempted by the newer map features.
Thanks!
-Roberto
Any feed back as per the unit shuts down and not able to turn on for quite a few tries, then it turned on for a few seconds, and kept jumping onto the Set Up Garmin Assist screen, then it shuts down again. Repeatedly.
When the 5S+ sapphire dropped in price to $360/€325 (not included tax/VAT), I had to try it out.
With a week of use I found it to be a bit comfusion with all the options for workouts this watch have. The menus can be a bit confusing, so it takes some time to get used to.
Pros:
+ 5S+ has an excellent design, size and weight for running and swimming and in general for wearing 24/7.
+ Excellent build quality and good screen-to-body ratio.
+ All sorts of activity tracking you could ever want.
+ Full color maps
Cons:
– Limited storage for additional maps
– Battery drain with some 3rd party watch faces/programs
– Better battery life on 5+ and 5X+
– Weak connection to Bluetooth headphones + mediocre music quality with Spotify
Hi Ray
I am in brainfade mode after reading dozens of reviews on the 5 Plus.
Currently I have a Vivoactive 3 which has been fine but am now looking at upgrading and I’m completely torn between the Fenix 5 plus and Vivoactive 4, with current deals the Fenix is only £90 more expensive.
I cycle mainly, road, MTB Gravel and indoor with some running and plan on taking up wild swimming.
Is the newer Vivo 4 a better bet given the age now of the Fenix, despite it still being a current model, or is the Fenix still a better alround fitness device in your opinion?
I would buy the Fenix over it any day. I have the Fenix 5 , 5x plus and 6 in our house and great units. The features for the god and biking will out weigh anything. Full gps and ant+ support
Outstanding review, thank you. It made my decision very easy.
The one problem I have had is the synchronisation with iTunes. It basically crashed and now refuses to work. It just hangs there “Checking Capacity”.
I have spoken to Garmin who have requested and been sent loads of information. They have decided that there will need to be a software upgrade. No idea when that will be.
So I did it the old-fashioned way and just copied-and-pasted. No biggy.
I love the product comparison feature but I’m wondering if you have an index somewhere of what each thing means exactly? There are some that I’m not 100% clear on and find myself going back to the indepth review to try and find the phrase, which isn’t always there. would be super helpful! thanks so much for all you do!
Ray,
Thanks for still replying to these questions. Can you post your run settings? What items do you have set to ON? 3D speed? 3D Climb? Avoidance?
TIA
Hi,
just bought a 5X Plus sapphire and ran into a connectivity issue with my Rotor INspider power meter.
Both, the watch and the power meter support ANT+ and Bluetooth.
The watch paired with the sensor easily, but during an activity, the connection
is down about 50 % of the time. My fenix 3HR, on the other hand, has no
issue to stay connected during an activity.
So I’m wondering if the f5x+ is connecting to the sensor via Bluetooth instead of ANT+.
But how can I chose the type of connection when pairing the sensor?
Or is this a general issue of f5x+?
(BTW, the GPS accuracy seems also worse compared to the f3. Can you confirm this?)
Thanks!
Frank
The Fenix 5 series did/does have some connectivity issues, but rarely with crankset based power meters. I would definitely ensure you’re using ANT+ instead of Bluetooth Smart. If you go into the sensor properties and look at info, it’ll state whether it’s ANT+ or BLE.
For GPS accuracy, I found them to be roughly in the same ballpark. Validate you’re using 1-secording, and play around with enabling GLONASS or disabling it, to see if that changes accuracy. Also, do ensure that you’ve got full satellite signal before starting the activity. Finally, with the Fenix 5 series, many people have found that accuracy of the first workout is bad, but improves substantially on the 2nd workout, as the unit will have fully updated its internal GPS database.
Thanks!
Meanwhile I managed to do both, pairing either via ANT+ or BLE. Unfortunately, in both cases, the connection is up only about 50 % of the time. I then used my old fenix 3hr and the Edge 520 from a friend, both paired via ANT+. I had only a single short drop with the f3hr and none with the Edge during my 1 hour test ride. So it looks like a f5x issue. However, the f5x is also paired with an older (ANT+ only) INpower on my other bike. And in this combination, i.e. f5x-to-INpower, there are no dropouts. So what do you think? Is the INspider or the f5x the troublemaker?
The GPS accuracy still not great after a couple of rides.
On the course in the screenshots (f3hr, top, vs vs f5x+, bottom),
this results in a 10 % difference in total distance!
Is there a way to connect a Zwift FootPod to a Garmin Fenix 5 Plus so I can record my Garmin activity on my watch but also use the Zwift FootPod for Zwift through my Apple TV?
Thanks!
For someone who can’t justify the expense of the fenix 6s pro, would you say it’s ok to go with the 5s plus or would it be too outdated? Or instinct solar (just not a huge fan of the look)?
Does the maps included show trails, a la alltrails or Gaia GPS? I was hoping to replace them with this watch.
I can’t speak for your area, but my 5+ certainly has all the trails around me in Central Pennsylvania. I’ve navigated several of them, so they’re probably all routable. The Fenix is Garmin’s outdoor line, so it’s not a surprise that it includes trails.
I’m a former triathlete turned hiker and just upgraded my tri watch to the 5X Plus. Intermittently during a route/coarse I get a vibration & pop up notification with a 2 or 3 digit number as depicted in the photo, What is it and how do I rid myself of it? Thank you!
That looks rather like a navigation prompt. Are you following a course?